250 PATCHWORK CUTTERS - 6273 ads

Wednesday, April 29, 2015

Price : $10000-80000/set

Section Steel shot peening surface cleaning machine 1.ISO9001 CE 2.good service 3.high efficiency 4.OEM is acceped Section Steel shot peening surface cleaning machine Technique Parameter type QH698 QH6912 QH6915 QH6920 QH6925 QH6930 QH6940 effective cleaning width(mm) 800...

Tuesday, April 28, 2015

1.Item Name: K-shape with 2-way on the single side 2.Material: High quality stainless steel AISI304 and AISI 316. 3.Center to center: 250mm 4.Hole Size: dia.47mm for outer, dia.24mm for inner. 5.Elliptical Hole: 24x12mm 6.Center Hole: dia.57mm for outer, dia.18.5mm for inner 7...

Tuesday, April 28, 2015

Quantity : 20 sets - Price : 28 000,00 €

Vacuum Cooling Technology Brife Introduction: Vacuum Cooler has been used for many years to rapidly cool ready food such as cooked meat,bread etc. Vacuum cooling process works by the rapid evaporation of water from produce under low-pressure situations. During the process energy...

Tuesday, April 28, 2015

Quantity : 20 sets - Price : 28 000,00 €

Vacuum Cooling Technology Brife Introduction: Vacuum Cooler has been used for many years to rapidly cool ready food such as cooked meat,bread etc. Vacuum cooling process works by the rapid evaporation of water from produce under low-pressure situations. During the process energy...

Tuesday, April 28, 2015

Quantity : 20 sets - Price : 28 000,00 €

Vacuum Cooling Technology Brife Introduction: Vacuum Cooler has been used for many years to rapidly cool ready food such as cooked meat,bread etc. Vacuum cooling process works by the rapid evaporation of water from produce under low-pressure situations. During the process energy...

Sunday, April 26, 2015

Quantity : 5 sets per - Price : $10000 per set

ROPW series road shot blasting machine Purpose instroduction: 1.Industrial floor coating and processing 2.Mark line processing 3.The airport line cleaning 4.Steel plate and steel structure surface clean treatment and rust remove 5.Concrete bridge surface treatment 6.Road surface...

Thursday, April 23, 2015

Equipped with multi-vessel hollow cathode gun, use tantalum tube inside the hollow cathode effect glow discharge equipped with PID temperature controller, temperature up to 250-400 degrees Operational Principle: Using particle simulation and Monte Carlo (PIC / MCC) method, apply...

Thursday, April 23, 2015

Evaporation ,magnetron series rolling vacuum coating machine are mainly used to do the metal film on the surface on the plastic, cloth ,paper, tinsel. Product category: According to the working principle can be divided into the following categories Resistance heating evaporation...

Thursday, April 23, 2015

This equipment mainly used in drill bits, milling cutter, core shaft, blades, precision mould, cutting tools industry, etc. Operational principle: This equipment adopts the vacuum evaporation ion beam technology. This equipment can install two to six different pure metal or alloy...

Thursday, April 23, 2015

Vacuum inlet filters are designed to enable the granular particles from the vacuum pump into the vacuum chamber and damage the structure of components and sophisticated. The product uses German advanced technology, high filtration efficiency and good effectiveness, compact structure...

Thursday, April 23, 2015

VAF Vacuum liquid and dust filter is special designed for the pump to avoid the liquid, liquid vapor and dust damage vacuum pump components and precision structure. The product adopt advanced international cyclone vane to separate liquid and impurities, and porous stainless steel...

Thursday, April 23, 2015

GD-J high vacuum damper valve(Angle Valve)is used to open or close the air current in the Vacuum system. The screw drive is adopted as the transmitted components to lift the valve, which are lighter and reliable in movement. GD-J is angle type and GD-S is three-way type with prepumping...

Thursday, April 23, 2015

DYC-Q series low vacuum electro-magnetic pressure difference valve is a new vacuum valve which has been installed in the gas inlet of the mechanical pump. The working principle is the valve and pump should be connected in the same power . When the pump stops working or power supply...

Thursday, April 23, 2015

GI-C series high-vacuum butterfly valve can control the airflow in the Vacuum system from 0°to 90°. he applicable active media of this valve are air, non-corrosive gas. GI-C series high-vacuum butterfly valve can ​control the airflow in the Vacuum system from 0°to 90°. he applicable...

Thursday, April 23, 2015

GDQ-J is angle type and GDQ-S is three-way type with prepumping. Applicable medium can be air and noncorrosive gases. GDQ pneumatic high vacuum damper valve(Angle Valve), motivated by compressed air, pushes the cylinder to up and down move with the valve rod by changing the direction...

Thursday, April 23, 2015

Applicable medium can be pure air and noncorrosive gases. CC-A Manual Ultra-high Vacuum Gate Valve uses a handle to drive steel ball shelf ,to perform valve plate open and close action,fold plate by spring force , open then exit. It is used to put through or cut off the air passage...

Thursday, April 23, 2015

CVS Rotary vane vacuum pump system is consisted of SV series rotary vane vacuum pump and the vacuum tank or vacuum chamber. It's widely used in vacuum suction and vacuum holding, CNC router. Construction: CVS series Vacuum system adopt SV single-stage rotary vane vacuum pump as host machine...

Thursday, April 23, 2015

ZJP Series Roots Vacuum Pump is a positive displacement pump, also known as mechanical booster pump, which is one of the main equipment to obtain the middle and high vacuum degree. Its working principle is similar to roots blower, which use two figure 8 rotor synchronous rotation...

Thursday, April 23, 2015

K series oil diffusion vacuum pump are the equipment mainly used for getting the high vacuum (10-2 pa – 10-5 pa) condition. It can make the high vacuum pumping system with valves, water-cooled baffle, pipelines, mechanical vacuum pump, etc, Which can generate 10-2 pa --10-4 pa working...

Thursday, April 23, 2015

KT series oil diffusion vacuum pump are the equipment mainly used for getting the high vacuum (10-2 pa – 10-5 pa) condition. It can make the high vacuum pumping system with valves, water-cooled baffle, pipelines, mechanical vacuum pump, etc, Which can generate 10-2 pa--10-4 pa working...

Thursday, April 23, 2015

2BE3 series liquid ring vacuum pumps are usually used to suction the gas without solid particle, undissolved and noncorrosive gas to generate vacuum and pressure in the closed container. By changing the pump material, they can also be used to suction corrosive gas or use corrosive...

Thursday, April 23, 2015

SV series single stage rotary vane vacuum pump is a kind of reliable, durable, economic and applicable range of vacuum equipment. In the circular pump body, it has an air suction valve and exhaust valve (stator). Thee vanes are equipped with an eccentric rotor slot in the rotor...

Wednesday, April 22, 2015

Product description: The equipment is widely used in aerospace, aviation, electronics and other industries components dealing. Using double water-cooled, electric lift, bell vertical stainless steel structure,three heating districts adopt Y -connection,type Y connection of three heating...

Wednesday, April 22, 2015

Main technical data of Induction vacuum hot-pressing furnace Model Effective Working dimension (mm) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW0 IF frequency (HZ) Working Pressure (T) Dimension (m) RVIY-60 200×250 ...)

Wednesday, April 22, 2015

Main technical data of Vacuum vapor deposition furnace Model Effective working dimension mm(Φ×H) Max temperature ( ℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIC-100 350×700 1800 7×10-1 0...

Wednesday, April 22, 2015

Main technical data of Vacuum induction high-temperature graphite furnace Model Effective working dimension mm(Φ×H) Max temperature(℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIG-100 200×300...

Wednesday, April 22, 2015

Main technical data of Vacuum bottom loading induction furnace Model Effective working Dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity(℃) RVIS-160B 500×800 2550 7×10-2 0.67 160...

Wednesday, April 22, 2015

Main technical data of Vacuum pyrolysis furnace Model Effective working dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIP-80 600×800 1000 5 1.5 160...

Wednesday, April 22, 2015

Vacuum degassing (VD) leads to high quality steel. The steel companies are adopting to Vacuum Degassing to improve the quality of steel required by customers for automotive, forging, rail industries etc. The VD process lasts approx. 20 Minutes and and is done at pressure of 0.5 torr ...

Wednesday, April 22, 2015

Product description: It is mainly used in the melting, rapid quenching or thrown belting process of Rare earth permanent magnetsNdFeB , hydrogen storage alloy, nickel base material, high temperature alloy etc.materials under the condition of vacuum or inert gas filling. Main configuration...