API 5L X65 PIPE - 8249 ads

Saturday, August 13, 2016

Quantity : Pretty - Price : 850,00 €

Water-type Mold Temperature Controller NAMING PRINCIPLE OMT – xxxx – xx ① ② ③ ① Orste Mold Temperature Controller ② First Two Numbers: Heater Power (kw) Last Two Numbers: Pump Power (*10-1HP) ③ Notes HTW: Medium is Water with High temperature D: Dual-heating Zone FEATURES 1...

Saturday, August 13, 2016

Quantity : New - Price : 850,00 €

Oil-type Mold Temperature Controller NAMING PRINCIPLE OMT – xxxx – xx ① ② ③ ① Orste Mold Temperature Controller ② First Two Numbers: Heater Power (kw) Last Two Numbers: Pump Power (*10-1HP) ③ Notes HTO：Medium is Oil with High temperature D: Dual-heating Zones FEATURES 1....

Saturday, August 13, 2016

Quantity : Pretty - Price : 1 200,00 €

Plastic Vertical Conveying Machine Screw Feeder NAMING PRINCIPLE OSF-xx-x ① ② ③ ① Orste Screw Feeder ② Outer Dia.of Conveying Pipe (mm) ③ Length of Conveying Pipe (m) FEATURES 1. Evenly mix different materials and effectively avoid material stratification during conveying process 2...

Saturday, August 13, 2016

Quantity : Pretty - Price : 3 200,00 €

Plastic Loading Machine Auto-loader NAMING PRINCIPLE OAL- xxS ① ② ① Orste Auto-Loader ② Motor Power (HP) S: Separate Type FEATURES 1. Microprocessor for ease of use and accurate control. 2. Stainless hopper receiver ensures no material contamination. 3. Motor overload protector...

Saturday, August 13, 2016

Quantity : Pretty - Price : 4 100,00 €

Plastic Granule Conveying Feeding Loading Machine Automatic Loader NAMING PRINCIPLE OAL- xxxS - xx ① ② ③ ① Orste Auto-Loader ② Motor Power (HP) S: Separate Type ③ 122: 1 to 2 Conveying, 12X: 1 to many Conveying FEATURES 1. “One-to-Two or One-to-Many” hopper loader greatly...

Saturday, August 13, 2016

Quantity : Pretty - Price : 1 500,00 €

Plastic Loading Machine Self-contained Vacuum Loader NAMING PRINCIPLE OAL- xxx - xx ① ② ③ ① Orste Auto-Loader ② Motor Power (HP) ③ Notes P: Equipped with Photo-sensor hopper receiver FEATURES 1. OAL adopts carbon brush motor with fast rotating speed and large air quantity...

Saturday, August 13, 2016

Quantity : New - Price : 6 000,00 €

Plastic Drying Machine Twin-tower Desiccant Dehumidifying Dryer NAMING PRINCIPLE OTD – xxx ① ② ① Orste Twin-tower Desiccant Dehumidifier ② Drying Air Quantity (m3/hr) FEATURES 1. Adopt German Simens PLC Program Controller and Temp. module. 2. Adopt large flow blower which has...

Saturday, August 13, 2016

Quantity : New - Price : 5 000,00 €

Plastic Machine Honeycomb Desiccant Dehumidifying Dryer NAMING PRINCIPLE ORD – xxxH ① ② ① Orste Rotary Honeycomb Dehumidifier ② Drying Air Flow (m3/hr), H: Honeycomb Rotor FEATURES 1. P.I.D temperature controller to accurately control regenerative temperature. 2. Adopt Japan...

Saturday, August 13, 2016

Quantity : new - Price : 450,00 €

Plastic Drying Machine Hopper Dryer Naming Principle OHD - xxx ① ② ① Orste Hopper Dryer ② Hopper Capacity (L) Product Features 1. OHD series adopt hot air diffuser to gain an even hot air flow to improve drying efficiency. 2. Material-contact surface made of stainless steel...

Thursday, August 11, 2016

Date: May 12th-14th, 2017 Venue: Poly World Trade Center Expo. Guangzhou, China 2017 Guangzhou Int'l Sanitary Ware Fair (GSW2017) will be held on May, 12th-14th, 2017 at Poly World Trade Center Expo, Guangzhou, accompanied by the 9th China (Guangzhou) Int'l Housing Industry Expo...

Thursday, August 11, 2016

Quantity : 1 m2 - Price : $13.28

three layer sound insulation blanket make from acoustic foam,sound isnulation barrier,Alu foil. With features of noise reduce,sound inulation,heat insulation and waterproof,prevent frostbite,pipe/duct protect Detail Information: Material: 20mm acoustic foam,2mm sound insulation barrier,0...

Thursday, August 11, 2016

Quantity : 1 m2 - Price : $13.28

pipe lagging thermal insulation material is a three layer composite materials,make from acoustic foam,sound isnulation barrier,Alu foil. With features of noise reduce,sound inulation,heat insulation and waterproof,prevent frostbite,pipe/duct protecting and so on. Widely use in pipe/duct...

Thursday, August 11, 2016

Wood Sawdust Dryer / Wood Chips Dryer General instruction of wood sawdust dryer: 1. Rotary drum type dryer, there are 31 in it, hot air enter directly. 2. Hot air in , biomass materials outside, so biomass materials can avoide be ignited.</ span> 3. Indirect heating source...

Tuesday, August 09, 2016

- - Flanged Y strainer with flanged end connections. Stainless steel body available in sizes 2" - 6". Multi-purpose raised face stainless steel Y strainer: - Available sizes 2" - 6" - 316/304 stainless steel body - 316/304 stainless steel seats - ANSI B16.5 150# - Flanged...

Monday, August 08, 2016

High Density polyethylene (Grade: for the insulating and jacketing of Telecommunication Cables) is used in the outer diameter coating.Duct Rodders will equipped with different size reel according to the length of rod. There are wheels on the reel, which make it convenient for moving...

Monday, August 08, 2016

1.cable laying contractor 2.underground cable laying 3.electricity supply industry 4.change the angle of the cable Location : bazhou hebei China, 065700 bazhou, Contact : Yang Jie, 86 0316 7399000

Monday, August 08, 2016

The cable roller can protect the cable, at the same time, cable block also can effectively reduce the friction of the cable, improve the construction speed. Divides into according to the material quality: Alloy wheels and MC nylon wheels. Nylon wheel are pouring, larger load...

Monday, August 08, 2016

Trapezoidal wire laying frame, commonly known as "cable support" for placement of cable tray, overhead wires or cables, adopts a hydraulic device, footing with ferry, easy to move, simple operation, easy to use, trapezoidal cable line frame bar selection of drill pipe material, will not bend...

Monday, August 08, 2016

Quantity : 60000 mete - Price : 0.1-3USD

Method of use: First, reasonable arrangement good direction of the wire line pipe, elbow is best use of pipe bender bending, fixed line pipe. Secondly, the threader either side across the line pipe, tube at the other end pull out a short online, then, will need to enter the line...

Monday, August 08, 2016

Method of use: First, reasonable arrangement good direction of the wire line pipe, elbow is best use of pipe bender bending, fixed line pipe. Secondly, the threader either side across the line pipe, tube at the other end pull out a short online, then, will need to enter the line...

Monday, August 08, 2016

Method of use: First, reasonable arrangement good direction of the wire line pipe, elbow is best use of pipe bender bending, fixed line pipe. Secondly, the threader either side across the line pipe, tube at the other end pull out a short online, then, will need to enter the line...

Monday, August 08, 2016

Method of use: First, reasonable arrangement good direction of the wire line pipe, elbow is best use of pipe bender bending, fixed line pipe. Secondly, the threader either side across the line pipe, tube at the other end pull out a short online, then, will need to enter the line...

Monday, August 08, 2016

Method of use: First, reasonable arrangement good direction of the wire line pipe, elbow is best use of pipe bender bending, fixed line pipe. Secondly, the threader either side across the line pipe, tube at the other end pull out a short online, then, will need to enter the line...

Monday, August 08, 2016

Quantity : 60000 mete - Price : 0.1-3USD

Model No. Diameter(mm) Length(m) Safety load Breaking Load L06S10 6mm 10m 450kgs 700 kgs L06S15 15m L06S20 20m L06S30 30m L06S50 50m L06S100 100m L06S30T 30m(with sleeve) L06S50T 50m(with sleeve) Features: Made of special plastic steel...

Monday, August 08, 2016

Method of use: First, reasonable arrangement good direction of the wire line pipe, elbow is best use of pipe bender bending, fixed line pipe. Secondly, the threader either side across the line pipe, tube at the other end pull out a short online, then, will need to enter the line...

Monday, August 08, 2016

Method of use: First, reasonable arrangement good direction of the wire line pipe, elbow is best use of pipe bender bending, fixed line pipe. Secondly, the threader either side across the line pipe, tube at the other end pull out a short online, then, will need to enter the line...

Monday, August 08, 2016

Method of use: First, reasonable arrangement good direction of the wire line pipe, elbow is best use of pipe bender bending, fixed line pipe. Secondly, the threader either side across the line pipe, tube at the other end pull out a short online, then, will need to enter the line...

Monday, August 08, 2016

1.Made of steel wire rope 2. Density: 8（g/m） 3.Rod diameter 2（mm） 4.Temperature - 800 to 800 (℃) 5.Traction tension failure 800（kg） Operation: 1.Black spring and red glue to the above 2.Wire rope twists the figure 8 3.Wire wear into the figure 8, spring lock wire 4.Wire...

Monday, August 08, 2016

1. The model steel and wire one-piece fusion, more wear-resisting, safe load of 300 kg。 2. Spring steel wire head, can rotate 360 degrees, can be bent into any of about 90 ° angle, the elasticity of the spring powerful clear line pipe blockage (such as lime sand wood wire scurfy, etc...)

Monday, August 08, 2016

1. The model steel and wire one-piece fusion, more wear-resisting, safe load of 300 kg。 2. Spring steel wire head, can rotate 360 degrees, can be bent into any of about 90 ° angle, the elasticity of the spring powerful clear line pipe blockage (such as lime sand wood wire scurfy, etc...)