DESCRIPTION - 13812 ads

Wednesday, June 15, 2022

Price : 0.1-100USD

XLPE insulated 3 cores power cable is normally used in power transmission and distribution systems. The three core cable wires are referred to IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is applied for the size...

Wednesday, June 15, 2022

Price : 0.1-100USD

PVC insulated 3 core power cables are normally used in power transmission and distribution systems. The 3 core PVC flexible cable are referred to IEC60502 CU/PVC/PVC 0.6/1KV. The circular conductor is applied for the size below 16㎡ and the shaped conductor is applied for the size...

Wednesday, June 15, 2022

Price : 0.1-100USD

The structure of 3 cores+1 earth cable wire is designed for application where the earth wires are required according to customer requirements. This 3 core and earth cable/wire ais often referred 3 cores +1 cables XLPE insulated with voltage 0.6/1000v or IEC 60502 3 core and earth cable...

Wednesday, June 15, 2022

Price : 0.1-100USD

The structure of 3cores+1earth is designed for application where the earth wires are required according to customer requirements. These cables are often referred 3 cores +1 cables with voltage 0.6/1000v or IEC 60502 3 cores +1 cables. 3 Cores+1 Earth Power Cable (PVC Insulated) Parameter...

Wednesday, June 15, 2022

Price : 0.1-100USD

XLPE insulated 2 core power cable are normally used in power transmission and distribution systems. The 2 core XLPE cable is referred to as IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is applied for the size above...

Wednesday, June 15, 2022

Price : 0.1-100USD

PVC insulated 2 cores power cables are normally used in power transmission and distribution system. The 2 core pvc cable are referred to IEC60502 CU/PVC/PVC 0.6/1KV. The circular conductor are applied for the size below 16mm² and the shaped conductor is applied for the size above...

Wednesday, June 15, 2022

Price : 0.1-100USD

2.5mm orange circular cable are widely used in Australia and New Zealand marktet following the standard of AS/NZS 5000.1, it is refered as orange circular CU/PVC/PVC 2X2.5 mm²+1.5. We get the SAA CERTIFICATE for these cables. 2.5mm Orange Circular Cable 2 Core+ Earth 0.6-1kv Parameter Nomial...

Wednesday, June 15, 2022

With natural nurishing and moisturizing ingredients, body and skin care is specially used to polish away dead skin cells for healthy, glowing-looking skin and keep healthy. Body and hair care products Description Polish away dead skin cells for healthy, glowing looking skin; Leave...

Tuesday, June 14, 2022

Product description Forged Rings Features Forming type : forging Rating: ANSI150LBS~2500LBS, DIN PN6~PN160 JIS 5K~30K, HG PN0.25~PN25 PN2.0~PN42.0 Size : 15mm—5000mm Forged Rings Standard ASME/ANSI: ASME B16.5, ASME B16.48, ASME B16.47 , API590 GB: GB/T9112~GB/9124-2000, GB/T2506-1989(2005) ...

Tuesday, June 14, 2022

Product description Blind flange is also called blind board, and its proper name is flange cover. It is a flange without holes in the middle for sealing the pipe plug. There are many types of sealing surface, such as rise face, ring joint face, large or smalltongue face and groove face...

Tuesday, June 14, 2022

Product description Steel tubing caps, also known as end cap, plug, cap, pipe cap, stuffy head, welded in the end of the pipe or installed on the outside thread of the end of the pipe to cover the pipe plugging fittings. It is used to close the pipeline and has the same function as pipe plugging...

Tuesday, June 14, 2022

Product description We are a stub end manufacturer, supplier and exporte, stub end divided into Europe system, Japan system, America system and lap Joints. ASME/ANSI B61.9 for long type stub end, MSS SP 43 for short stub end. HG20621 for short stub end, GB9118 1TYPE for long stub end...

Tuesday, June 14, 2022

Product description We are manufacturers, reducing tee suppliers, and exporter of reducing tee, branches diameters are different with the other two main pipe diameters and are called three-way with different diameters. Our reducing tee are widely used in construction and maintenance...

Tuesday, June 14, 2022

Product description We are manufacturer, supplier, and exporter of equal tees, which are also understood as straight tees, these equal tees have a diameter that is same to the diameter of the main pipe, as a result, the name equal tee. We furnish ss butt weld equal tees that are set...

Tuesday, June 14, 2022

Quantity : 150000 ton - Price : USD 2500/T to USD 35

Description of Hot Rolled Steel Coil Hot rolling is a mill process that involves rolling the steel at a high temperature (typically at a temperature over 1700° F), which is above the steel's recrystallization temperature. When steel is above the recrystallization temperature, it can...

Tuesday, June 14, 2022

Quantity : 150000 ton - Price : USD 2500/T to USD 35

Description of Galvanized Rolled Steel Hot dipped galvanized steel sheet is a carbon steel sheet coated with zinc on both sides through a continuous hot-dip process. When the heated steel strip is in contact with the molten zinc, the coating is firmly adhered to the steel by the iron-zinc...

Tuesday, June 14, 2022

Quantity : 150000 ton - Price : USD 2500/T to USD 35

Description of Galvanized Steel Coils hot rolled galvanized steel coil are produced by passing the acid-washed and calendered full hard plate through the zinc tank, thereby galvanizing the film on the surface. Galvanized steel coil with good raw materials and 7 times the cold rolling machine...

Tuesday, June 14, 2022

Quantity : 150000 ton - Price : USD 2500/T to USD 35

Description of Direct Reduced Iron (DRI Steel) Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ore (in the form of lumps, pellets, or fines) to iron by a reducing gas or elemental carbon produced from natural gas or coal. Many ores...

Tuesday, June 14, 2022

Quantity : 150000 ton - Price : USD 2500/T to USD 35

Description of Copper Cathode Copper is one of the basic chemical elements. In its nearly pure state, copper is a reddish-orange metal known for its high thermal and electrical conductivity. It is commonly used to produce a wide variety of products, including electrical wire, cooking...

Tuesday, June 14, 2022

Price : 1000-6000USD

Taking 4-cylinder pneumatic system as power source, two cylinders are used for bending when the other two are used for pressing. Working stably without power makes the machine an efficient ideal equipment, and our company can customized general type accoring to the customer requirements...

Tuesday, June 14, 2022

Price : 1000-6000USD

Locking machine is necessary in duct area because it can produce all kinds of types to meet locking requirements. Standard machine can process 0.5-1.5mm galvanized sheet metal, and our company would specially introduce high-strength rolling reels made of GCr15, a kind of steel which...

Tuesday, June 14, 2022

Price : 1000-6000USD

Product Description Leveling Equipment And Beading Machine Performance Feature: Leveling and beading machine is an upgraded machine of line 5 beading machine. The machine adds leveling function before grooving based on sheet metal beading machine. So that the finished sheet metal...

Tuesday, June 14, 2022

Price : 1000-6000USD

It's widely used for riveting angle steel flange and galvanized sheet metal because the machine is easy to operate and move. Product Description Hydraulic Riveting Machine Performance Features: The portable riveting machine is one of the essential machines for the installation of...

Tuesday, June 14, 2022

Price : 1000-6000USD

Product Description Hydraulic Lock Seaming Machine Performance Feature: Hydraulic duct seaming machines is used to lock 0.3-1.2 mm thickness rectangular HVAC air duct within 1500 mm length. The machine adopts PLC control and hydraulic drive. Advantages of this hydraulic lock closing...

Tuesday, June 14, 2022

Price : 1000-6000USD

Product Description Hydraulic Folding Machine Performance Feature: The cnc hydraulic folding machine is a sheet metal folding machine that makes rectangular HVAC duct. Actually, the hydraulic sheet metal folding machine can be divided into two types, hydraulic TDF flange sheet folding...

Tuesday, June 14, 2022

Hydraulic Cylinder End Cap Product: hydraulic cylinder end cap Application: hydraulic cylinder Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70-36 grade WCB Process: die mold forged, forging + CNC machining, Surface treatment: anti-rust oil or painting Surface roughness...

Tuesday, June 14, 2022

Forklift Series Cylinders What is Forklift Series Cylinder？ The forklift hydraulic lift cylinder include tilt cylinders, lift cylinders, steering cylinders, and the like. Our company produces cylinders for forklifts of various tonnages with reliable performance and long service life...

Tuesday, June 14, 2022

Forged Trunnion Product: forged trunnion Application: hydraulic cylinder, truck Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70-36 grade WCB Process: die mold forged, forging + CNC machining, Surface treatment: anti-rust oil or painting Surface roughness: 12...

Saturday, June 11, 2022

UV LED Drying Machine FUNCTION: This machine is available to drying the UV paint after painting to dry quickly. PRODUCT DESCRIPTION: The service life of this machine is more than 10 times that of a traditional mercury lamp uv coating curing machine, and the maintenance cost is almost zero...

Saturday, June 11, 2022

The gpon vendors provided by Primus IT has three advantages: the first transmission distance is longer, the use of optical fiber transmission, the coverage radius of the access layer can reach 20 kilometres; the second can provide a higher bandwidth, 2.5G downstream / 1.25 upstream...