PROCESSING - 10388 ads

Tuesday, April 19, 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Saturday, April 16, 2022

Quantity : 10-1000 pc - Price : USD9,000 - USD 18,00

Zillion Techs SWIR camera is based on an in-house developed InGaAs detector with multiple resolutions. The compact GH-SW640-GigE meets requirements of high sensitivity in the SWIR range from 900nm to1700nm and with accompanied by extended wavelength from 400nm to 1700nm options...

Saturday, April 16, 2022

Quantity : 10 product - Price : USD 30,000.00-700,00

Compared with the knife-up cutting machine, it has obvious advantages, no chips, no noise, low power, energy saving, no waste of raw materials, low cost and manual processing of burrs. It is the first choice for the upgrading of merchants' cutting equipment. The cut end of the pipe...

Saturday, April 16, 2022

Quantity : 10 product - Price : USD 30,000.00-700,00

What is the Meaning of Auxiliary Equipment？ Plastic auxiliary equipment covers a wide range, from batch raw material processing and storage to mixing and metering, to the drying, packaging, storage and transportation of finished products. It is related to the operating efficiency...

Saturday, April 16, 2022

Hot cathode of 2 feet UV tube light, made of high quality quartz. The average rated life of uv tube light 2 feet is 9000 hours. Different diameter (T5,T6,T8) of lamp ,aluminum and ceramic bases can be chosen.The 254nm (UV output) was tested in the laboratory.Two types of 2 feet UV tube light...

Saturday, April 16, 2022

Product features: 4 pin uv lamp Product functions: water treatment sterilization, air sterilization, surface sterilization, microbial killing, photooxygen catalysis, photodecomposition, surface modification, etc. Main applications of 4 pin uv lamp Air sterilization, air purification...

Saturday, April 16, 2022

Quantity : 10 product - Price : USD 30,000.00-700,00

Hopper dryer is the replacement product of standard hot air dryer, which is improved on the basis of the original function to fully consider the environmental factors. It can dry raw materials that are moist from packaging, transportation or recycling. In the processing of raw materials...

Saturday, April 16, 2022

HX Technology also offers PCB Finish Product Assembly and circuit board enclosure, including assembly with the outer shell and with a wire connector. With two custom circuit board enclosure lines and a specialized warehouse for raw material provided by customers, we will ensure your...

Saturday, April 16, 2022

HX electronic technology process specializes in manufacturing PCBAs using fully automated, we have the 6 SMT lines equip Fuji XPF SMT machine for surface mount (SMT) and 2 through-hole technology (THT) lines. HX electronic technology is uniquely positioned to take on large mass, medium...

Saturday, April 16, 2022

After every single detail of the electronic device has been finished for the design and engineering, we will prepare for production. The needed electronic components will be purchased from our reliable suppliers globally. First article, small, medium and large serial production are...

Saturday, April 16, 2022

Metal Tech is committed to the design, manufacturing, and distribution of Wire and Wire Mesh machines, including Wire Drawing Machine, Nail Making Machine, Screw Making Machine, Gabion Machine, Chain Link Fence Machine, Welding Mesh Making Machine, Barbed Wire Making Machine, Annealing furnace...

Saturday, April 16, 2022

Quantity : 1-100,000 - Price : $1-$10

DF has an advanced CNC machining center, carving drilling machine, turning and milling machine, wire cutting, and other equipment. With these machines and experienced staff, we can repeat the positioning accuracy within the tolerance of 0.005mm, providing a strong guarantee for precision parts...

Saturday, April 16, 2022

Quantity : 1-100,000 - Price : $1-$10

CNC refers to cutting material with a computer numerical control machine. The CNC machining process interprets your 3D CAD model and translates data to CNC machines. The main benefit of the process is that CNC will produce parts that can replace the additive manufactured prototypes...

Saturday, April 16, 2022

Types of vehicle clutch plate Suitable for Scania The application can transmit large torque, but the structure is complex, suitable for medium and heavy machinery. The friction clutch transfers torque by the friction torque on the working surface. As a professional clutch disc supplier...

Saturday, April 16, 2022

Types of Disc Brushes The disc brush is specially used to deal with the surface of metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitable have burr or flanging. If the burrs are not removed, it will lead to the accumulated errors...

Saturday, April 16, 2022

Types of Clutch Disc Suitable for Renault Renault The disc 2 is fixed on the driving shaft. The disc 3 is connected with the driven shaft by a flat key or spline, and can be moved axially on the shaft. The two discs can be pressed tightly by the spring 5. When working, Relying on...

Saturday, April 16, 2022

Types of Clutch Disc Suitable for Mercedes Benz The difference is that it can be engaged or disengaged at any time during the operation or parking process of the machine, and it is fast and reliable to achieve the intermittent operation of the transmission system for speed change and reversal...

Saturday, April 16, 2022

Types of Clutch Disc Suitable for MAN Brand According to the operation mode, there are four types of mechanically operated friction clutches, electromagnetically operated friction clutches, hydraulically operated friction clutches and pneumatically operated friction clutches. The...

Saturday, April 16, 2022

Types of Clutch Disc Suitable for DAF When working, move the slip ring to the left. The two sets of friction plates are pressed by the lever and the pressure plate, and the clutch is in a combined state. If the slip ring is moved to the right, the friction plates are released and...

Saturday, April 16, 2022

Deburring is a problem faced by all metal processing enterprises. The size of the burr directly affects the accuracy, quality and life of the product. Most of our products are designed for the polishing of metal parts. The principle is to use abrasive fiber with strong cutting ability...

Saturday, April 16, 2022

When purchasing custom car clutch plate, you must pay attention to the quality of the clutch plates. There should be noclutch plates for car with deformation, warpage and poor tightness on the surface, which will not only cause the clutch to slip and stop production but also cause...

Saturday, April 16, 2022

The auto clutch cover is one of the constituent parts of the clutch assembly. The auto clutch cover supports and installs the clutch pressure plate, compression spring and the shell-shaped base part of the release lever mechanism. The car clutch cover is important to the car because...

Saturday, April 16, 2022

In addition to the scope of standardization, we also provide customized services for these clutch disc and pressure plates so that we can meet every customer's needs in an efficient manner. We have been able to provide high-quality clutch and pressure plate kit at industry-leading...

Saturday, April 16, 2022

‎ ANGLE GRINDER Under many circumstance, due to the limitation of equipment, it is necessary to use manual equipment to grind the parts such as angle grinder. At these time, many small types of brush, such as pipe br... DEBURRING Deburring is a problem faced by all metal processing enterprises...

Saturday, April 16, 2022

Under many circumstance, due to the limitation of equipment, it is necessary to use manual equipment to grind the parts such as angle grinder. At these time, many small types of brush, such as pipe brush, end brush, we can design the size of the shank according to the specifications...

Saturday, April 16, 2022

What is a vfd multiple motors ? Variable frequency drive (VFD) is a kind of electrical power transmission equipment which uses frequency conversion technology and microelectronics technology to control AC motor by changing the speed of motor. The VFD is mainly composed of rectifier (AC to DC)...

Saturday, April 16, 2022

We at CCS can provide customers with a variety of electrical power transmission equipment and electrical control solutions, which can meet the needs of various working conditions. We strictly control the quality, from raw material procurement to factory test, and all is in accordance...

Friday, April 15, 2022

Quantity : 3000000PCS - Price : USD0.015-USD0.50

The glass bottle container is made of high boron silicon, which has the advantages of high-temperature resistance and corrosion resistance. It is widely used in pharmaceuticals, essential oils, and other personal care products. The bottle cap and dropper cap of the glass containers...

Friday, April 15, 2022

Quantity : 5000 ton/p - Price : ＞0.8USD

Bright Annealed Tubes Description Annealed stainless steel tubing is a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree...

Thursday, April 14, 2022

Roof Seamers for Sale This automatic round seamer machine series is assistant equipment for the roof roll former seamer. Seaming the roof panels, our electric roof seamer is featured with lightweight, small size, easy operation, and maintenance, especially considering the narrow...