TEMPERATURE LIQUID SILICONE RUBBER FOR - 31832 ads

Friday, March 01, 2024

Quantity : 700 tons/y - Price : $4-10/kg

PTFE Molded Tube PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin by plunger. PTFE is commonly known as the king of plastics. The PTFE product has many excellent features. As a professional...

Friday, March 01, 2024

Quantity : 700 tons/y - Price : $4-10/kg

PTFE Molded Sheet PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding and sintering; Turning plate is the blank of PTFE suspension resin formed by molding or hydraulic method and then turning or rotary cutting...

Friday, March 01, 2024

Quantity : 700 tons/y - Price : $4-10/kg

PTFE Molded Rods In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection and other aspects. Because PTFE molded rod has good high temperature resistance and corrosion resistance, it can improve...

Friday, March 01, 2024

Price : 0-400

An ac on board charger unit (OBC) is a device used in electric vehicles (EVs) to convert alternating current (AC) power from the electrical grid into direct current (DC) power to recharge the vehicle's battery pack. The EV OBC is typically located within the vehicle and is integrated...

Friday, March 01, 2024

Price : 0-400

Technical features of the motor controller: (1) use SVPWM modulation algorithm to improve the energy efficiency ratio of the power system; (2) configure high-efficiency CAN communication module to control the normal operation of the system; (3) have liquid temperature control system...

Friday, March 01, 2024

Price : 0-400

Product Features: Adopts liquid-cooled seal waterproof and dust-proof structure, with lower temperature rise than natural cooling and high reliability of the whole machine. Meets ISO26262 ASIL B safety level. Full-function protection: input overvoltage undervoltage, output overvoltage...

Friday, March 01, 2024

Price : 0-400

Product Features Adopt advanced high-frequency switching control technology, effectively reducing the size of the product, with the characteristics of high power density. Support 240 ~ 450Vdc wide range input, flexible to adapt to different models. High safety electrical isolation...

Friday, March 01, 2024

1. Split design, Teflon coating, PTFE feet, PFA casing. 2. Better thermal conductivity and higher heating efficiency. 3. The heating plate area, plate thickness, column foot height, hole diameter, hole depth, and hole number can be customized, and it is suitable for various laboratory...

Friday, March 01, 2024

Price : USD3000-200000

Molding Over Molding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements...

Friday, March 01, 2024

Price : USD3000-200000

Medical Pipette Tip Mold USM as a medical plastic injection mold supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. All plastic parts which will be used in the medical...

Friday, March 01, 2024

Price : USD3000-200000

Insert Molding Parts The combination of easy plasticity and elasticity of plastic and rigidity, strength and heat resistance of metal can be firmly made into a complex and exquisite metal-plastic integrated product, it can also reduce product size and weight; The combination of plastic...

Friday, March 01, 2024

Price : USD3000-200000

Insert Mold USM molds focus on structural parts injection molds, water-assisted Gas-assisted injection molds, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product injection molding...

Friday, March 01, 2024

Price : USD3000-200000

gas injection moulding manufacturers gas injection moulding / gas assist injection moulding / gas assist molding gas injection mold / gas injection mould gas assist injection molding design guide Water & Gas Injection Mold Since the thermal conductivity and heat capacity of water...

Friday, March 01, 2024

Price : 20USD

Aerospace titanium components offer outstanding advantages in lightweight design. The high strength and excellent corrosion resistance of titanium alloys make them widely used in the aerospace industry. Titanium parts reduce aircraft weight, enhance fuel efficiency, and maintain...

Friday, March 01, 2024

The wooden decorative panel is a decorative layer of PVC, PETG, cloth surface, wood veneer (customizable), and solid core substrate, which are formed by hot pressing at high temperature and pressure in one go, forming a stable material structure internally. The surface is decorated...

Friday, March 01, 2024

SRB Super Industrial Flooring SRB flooring has strong anti fouling, anti oil, and anti chemical corrosion properties. The surface is coated with special materials, which are resistant to NMP (N-methylpyrrolidone), hydrofluoric acid, graphite, etc. At the same time, it has a protective...

Friday, March 01, 2024

Quickly Installed Heavy-Duty Industrial Flooring The fast loading and heavy-duty industrial floor is made of alloy plastic with physical and chemical properties superior to PVC, which is strictly mixed and produced by various polymer materials in a certain proportion. Its material density...

Friday, March 01, 2024

NCM lithium batteries are a type of rechargeable Lithium-ion battery. These batteries with ncm battery chemistry are composed of a combination of nickel, cobalt, and manganese, giving them a high energy density and long life. This makes them ideal for applications such as electric vehicles...

Friday, March 01, 2024

Warehouse automation solution is an integral part of optimizing supply chains as it reduces time, effort, and errors caused by manual tasks. Today, our article will take a deep dive into the benefits of warehouse automation systems and explain why it is worthwhile. As the wave of...

Friday, March 01, 2024

Multifilament yarns are yarns that have multiple filament fibers that can be treated to twist together. Multifilament of any kind will use a spinneret with many small holes, unlike the single-holed monofilament spinneret. The drawing out process draws all of the extruded filaments...

Friday, March 01, 2024

Ice Cooled Yarn, also called cooling yarn or polyethylene cooling yarn. It's a new material of modified polyethylene, which is a new type of super cold yarn. In hot summer, people pursue a cool and lasting comfort experience. Ice cool yarn can not only achieve excellent contact cold...

Friday, March 01, 2024

Dipped Nylon Fine Denier Tyre Cord Fabrics, is also called as Nylon Low Denier Tyre cord fabric. These low denier dipped nylon tyre cord fabric has the characteristics of high strength, good adhesion with rubber, good fatigue resistance, fabric thickness thin, light weight, light...

Friday, March 01, 2024

Tyre cord fabrics market by material, nylon, polyester, rayon, aramid and polyethylene napthalate. YUSHENG product line of tire cord fabrics constitutes the entire range of textile reinforcements such as Nylon Tyre Cord Fabrics, Polyester Tyre Cord Fabrics, and Chafer Fabrics for...

Thursday, February 29, 2024

The BAIC Dealership Sign is made of acrylic material, which has the characteristics of high temperature resistance and stable coloring. Generally, it can be used indoors for five years and outdoors for more than three years. BAIC Motor and BAIC Group have a unified BAIC car logo....

Thursday, February 29, 2024

The production of the audi signage mainly adopts the process of blister and electroplating. Goodbong is a manufacturer integrating many equipment and technical talents. It has certain technical insights into acrylic blister electroplating and vacuum coating. The main materials for...

Thursday, February 29, 2024

Quantity : 200sets、50 - Price : $60~$20,000

The main difficulty of the explosion proof variable frequency drive is the heat dissipation problem. Because all components of the explosion-proof movement frequency converter are installed in the explosion-proof cabinet cavity, air cannot flow, the problem of heat dissipation becomes...

Thursday, February 29, 2024

Model: YVO-072 YVO-270 YVO-480 YVO-600 YVO-720 YVO-1000 Main Parameters: Temperature range: RT+25℃～200℃/300℃/400℃ Vacuum range: normal pressure to 3kpa Temperature fluctuation: ±0.3℃ With vacuum pump Description of Laboratory And industrial Vacuum Oven Vacuum oven is also called...

Thursday, February 29, 2024

Many industrial products are exposed to several atmospherical agents in addition to the well-known temperature, humidity and corrosion. Very high degradation phenomena are caused by sand, dust and rain. In particular, many electrical components have to be permanently water- tight...

Thursday, February 29, 2024

Industrial ovens (also called industrial drying oven china, heating and drying ovens, and industrial heating ovens) are used for drying moisture and curing and baking metal surface coating, components, parts, and finished products, whose temperature can be from 200 ℃ max to 500 ℃ max...

Thursday, February 29, 2024

Model: YPO-6480-300 Main Parameters: Volume: 6480L Inner size: 1.8*2.0*1.8m (w*h*d) Temperature range: RT+25℃～200℃/300℃ Temperature fluctuation: ±0.3℃ Temperature uniformity: ±2％℃ Description of Industrial Drying Oven For Varnish Motors Industrial drying ovens for varnish motors...