WIND&SOLAR - 4303 ads

Thursday, March 17, 2016

IG3115C series 1-6KW solar powered inverters Key Features: 1.Pure sine wave output 2.The charging current is big up to 70 Amp 3.Output power factor: S 0.9-1 4.Well accept generator's output 5.Full automatical and silent operation 6.Automatically transfer between battery and line modes 7...

Thursday, March 17, 2016

IG3115CL 1-10KW Solar Panel Inverters Key Features: 1. Pure Sine wave Output 2. The charging current is big up to 70 A 3. Output Power Factor is 0.9-1 4. Auto change AC-DC 5. Full automatic and silent operation 6. Automatically transfer between battery and line modes 7. Microprocessor...

Thursday, March 17, 2016

Protection for low battery voltage、over load、output short circuitand over- temperature Restrain surge interference、eliminate noise、protection for thunder striking，provide the reliable power to the home appliances. IG3115CS 1-10KVA solar system inverters Key Features: 1.Pure sine wave output 2...

Wednesday, March 16, 2016

Quantity : 10 - Price : $ 278/set

PS5B 400Wh high capacity portable solar generator with MPPT solar controller Details and technical specifications: Product Features ♦Pure sine wave output, different output frequency and output voltage selectable ♦DSP chip control management, modular design ♦LCD for indicating...

Tuesday, March 15, 2016

12v mppt solar charge controller Key Features: ■Adopt advanced MCU microprocessor control technology. ■12V/24V/48V self detect to choose output voltage. ■Advanced MPPT T echnology, High converting efficiency higher than 97% for minimizing energy loss. ■Capable to parallel in output...

Tuesday, March 15, 2016

http://home power inverterIG3110C 500va solar inverter Key Features: ■Optional input voltage range. ■Full automatic and silent operation. ■Rack Tower design. ■Automatic charging. ■Built-in with 10Amp or 20Amp optional charger for up to 200Ah battery. ■Auto change AC-DC. ■Over-load...

Tuesday, March 15, 2016

IG3115C 1000 w pure sine wave inverter Key Features: ■Pure sine wave output ■The charging current is big up to 75 Amp ■Output power factor: s 0.9-1 ■Well accept generator's output ■Full automatical and silent operation ■Automatically transfer between batter y and line modes...

Thursday, March 10, 2016

Introduction: It is according to IEC60068-2-1(GB/T2423.1) and IEC60068-2-2(GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification: •The chamber is produced by SUS304 Steel, the temperature...

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday, March 10, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Tuesday, March 08, 2016

IG3117C 3000w pure sine inverter Key Features: 1. High Efficiency 98% 3000w pure sine wave power inverter 2. High frequency switching technology for compact size and light weight 3. LCD Display,Pure sinewave output , 4. High efficient DC to AC conversion minimizing energy loss ...

Tuesday, March 08, 2016

IG3115CL 1-6KW 6000w pure sine wave inverter Key Features: 1.Pure sine wave output 2.The charging current is big up to 70 Amp 3.Output power factor is 0.9-1 4.Well accept generator's output 5.Full automatical and silent operation 6.Automatically transfer between battery and line modes 7...

Friday, February 26, 2016

Price : Negotiable

7d Interactive Motion Cinema with Shooting Guns Hydraulic CE 1. Product Description A 7D motion cinema integrates the 3D video, interactive games, dynamic theater and more than ten core technologies, such as stereo-imaging, wireless location tracking, human-computer interaction...

Friday, February 26, 2016

Contact Person: Minnie Lee Skype: misstiger1986 Mobile & Whatsapp & We chat: 0086 13570917163 1. What is hydraulic 5D MOTION CINEMA 5D motion cinema, based on the 4D cinema, is a combination of 5D tailoring dynamic seat with 5D movies. Trend, as a leading innovator of...

Wednesday, February 24, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Saturday, February 20, 2016

Tempered Glass Tempered glass is processed by heating ordinary glass to its softening point and then quenched rapidly. This will make the glass surface under compression and the center tension. The mechanical strength is thus increased and improves its resistance to wind load, impact...

Saturday, February 20, 2016

Reflective Coated Glass Features: Rich appearance effects to meet various aesthetic requirements Effective control of direct solar radiation and provide shading effects Appropriate visible light transmittance to meet the daylight requirements Location : Xinyi glass industrial park...

Saturday, February 20, 2016

Double-silver LOW-E Glass Features: Higher visible light transmittance and natural daylight. Rich appearance effects to meet various aesthetic requirements Lower heat-transfer coefficient, effective reduction of indoor and outdoor heat transfer, and keep the indoor temperature steady...

Saturday, February 20, 2016

Solar Shading single-silver LOW-E glass Features: Moderate visible light transmittance, brilliant appearance color, and excellent aesthetic effect. Good heat preservation performance, effectively reduce indoor and outdoor heat transfer and keep the indoor temperature steady. ...

Saturday, February 20, 2016

Ceramic Fritted Glass Ceramic fritted glass is produced by silk-screening an inorganic frit onto the glass surface, then dried and heat treated. The frit will be permanently fused to the glass surface. Features: Decorative: Rich colorsand pattern; can be custom-made to achieve the...

Friday, February 19, 2016

Quantity : 100

Features - High and safety Working Performance - Precision move and stop smoothly - Easy to install and dismantle - Easy to change parts when broken - Compact body, small size and top beauty - Low noise and power consumption - Smooth operation - Reasonable design...

Sunday, January 24, 2016

Steel Structure's Characteristics: Standard: GB50661 JGJ81 BS4592 ASM JIS ISO Size: depend on your drawing Material: Q235 Q345 Welded H Beam and Hot Rolled Section Steel Grade: Grade B Material: material: low carbon steel Roofing : single steel sheet ,RW,EPS, PU,XPS,PF Wall panel...

Sunday, January 24, 2016

Structural Steel Buildings' Advantages: 1. Easy Installation The steel frames are accurately engineered to fit simultaneously, with one end skidding into the other. No exceptional fasteners are required, and fewer employees are required to entire the process. No cutting, retaining...

Sunday, January 24, 2016

Steel Structure's Characteristics: Standard: GB50661 JGJ81 BS4592 ASM JIS ISO Size: depend on your drawing Material: Q235 Q345 Welded H Beam and Hot Rolled Section Steel Grade: Grade B Material: material: low carbon steel Roofing : single steel sheet ,RW,EPS, PU,XPS,PF Wall panel...

Sunday, January 24, 2016

Structural Steel Buildings' Advantages: 1. Easy Installation The steel frames are accurately engineered to fit simultaneously, with one end skidding into the other. No exceptional fasteners are required, and fewer employees are required to entire the process. No cutting, retaining...

Sunday, January 24, 2016

Structural Steel Buildings' Advantages: 1. Easy Installation The steel frames are accurately engineered to fit simultaneously, with one end skidding into the other. No exceptional fasteners are required, and fewer employees are required to entire the process. No cutting, retaining...

Sunday, January 24, 2016

Structural Steel Buildings' Advantages: 1. Easy Installation The steel frames are accurately engineered to fit simultaneously, with one end skidding into the other. No exceptional fasteners are required, and fewer employees are required to entire the process. No cutting, retaining...

Sunday, January 24, 2016

Quantity : 100 ton - Price : us$45/sqm

Steel Structure's Characteristics: Standard: GB50661 JGJ81 BS4592 ASM JIS ISO Size: depend on your drawing Material: Q235 Q345 Welded H Beam and Hot Rolled Section Steel Grade: Grade B Material: material: low carbon steel Roofing : single steel sheet ,RW,EPS, PU,XPS,PF Wall panel...

Sunday, January 24, 2016

Low Frequency Off-Grid Pure Sine Wave Inverter SANDI SDP series Low Frequency Off Grid Pure Sine Wave Inverter is one of the most advanced DC to AC conversion products in the world. It's widely used for solar energy, wind turbine and other renewable energy systems,also suitable...