FERROUS - 618 ads

Saturday, May 18, 2024

Dog Bone Test Specimen Dog Bone material test sample testing integrates domestic testing resources, and provides exclusive solutions for profile, steel pipe, plate, stainless steel, structural steel, etc. according to various testing standards including tensile test and various performance...

Saturday, May 18, 2024

Belt Buckle Belt buckle is also called belt head or belt buckle head. Belt buckle is a hardware accessory at the front end of the belt. Used to decorate and fix the whole belt. Belt Buckle Specifications Product key words: Stainless steel pen holder trim materials: stainless steel...

Saturday, May 18, 2024

Quantity : 25 Set/Set - Price : 15 000,00 €

The Best Sale Magnesia Powder Roller Ball Press Machine Packaging & Delivery Packing: Standard container Delivery: 20 days after receiving pry-payment Various powder molding ball press machine 1. supply higher pressure and higher intensity during production of briquettes 2...

Saturday, May 18, 2024

Quantity : 30 Set/Set - Price : 15 000,00 €

High quality YHQ series lime powder briquette machine Advantages: Energy conservation and environmental protection, easy to transport and improve the utilization rate of the waste, has the good economic efficiency and the social efficiency. Ball pressure machine technology: Flammable...

Friday, May 17, 2024

Kalikund Steel & Engineering Company (KSEC) is a highly acclaimed manufacturer and supplier of all ferrous and non-ferrous metal products like , Tubes, Flanges, Buttwelded Pipe Fittings, Foged Fittings, Tube Fittings, Sheets, Plates & Coils, Bars, Fastners etc. The company...

Friday, May 17, 2024

Quantity : 5000kg per

1. ABOUT OUR COMPANY We are new material company concentrated on manufacturing and supplying high-purity metals and high-quality chemical raw materials for high-tech enterprises and research institutes. With decades of experience in research and development production, We have customers...

Thursday, May 16, 2024

Quantity : 1 - Price : 37000 USD~999000 USD

filler masterbatch machine for plastic granules Features of plastic pellet machine: 1)This technology is suitable to produce polymers compounding masterbatch at high value with variety of filler and resign. 2)With scientific and reasonable technology,the machine has high efficiency...

Thursday, May 16, 2024

Established in the year 2013 Amigo Impex is one of the leading Supplier, Stockist and Exporter of optimum quality of Ferrous & Non Ferrous Products in Mumbai, India. Our product range includes & Tubes, Pipe Fittings, Bars & Rods, Flanges, Sheets/Plates, Wire, Fasteners, etc...

Saturday, May 11, 2024

Guru Guatam Steel We are a veteran and a formidable player in Mumbai metal market. Established in year 1984 we have been primarily engaged Sourcing & supplying all kinds of tubes & in Ferrous & Non-Ferrous metals. In a way we are a specialist in supplying various grades...

Saturday, May 11, 2024

Niko Steel & Engineering LLP is one of the leading Stockiest, Supplier & Exporter of ferrous & non ferrous Fasteners. Established in the year 1981 by Mr. Poonamchand Shah as a sole proprietor of this company having a vast experience of 30 years in the trading of steel materials...

Saturday, May 11, 2024

Quantity : 500kg/mont - Price : $865-950/kg

Indium is a ductile, malleable, slivery-white metal; softer than lead. Pure indium emits a high-pitched “cry” when bent. It is unaffected by water and very stable in air. Most often associated with zinc, indium is also found in iron, lead, and copper ores and is about as abundant as silver...

Saturday, May 11, 2024

CB-MP SET STYLE FOR MULTIPURPOSE This carbide tipped bandsaw blade with specially designed multipurpose geometry is developed to cover cutting a wide range of materials. The geometry and set teeth also allows for the blade to be used in less stable machines. Applications: Alloy Steel...

Friday, May 10, 2024

Super Piping Solution is suppliers of industrial products likes pipe fittings, flanges, fasteners of ferrous and non ferrous metals. Super Piping Solutions is based in Mumbai, India. Visit www.superpipingsolutions.com to know more about wide range of products Location : 69, 71, Kika St...

Friday, May 10, 2024

Anping Tenglu metal Wire Mesh Co.LTD Aluminum Woven Wire Mesh Aluminum is largely considered the most popular non-ferrous metal in the world, and as such, aluminum alloys are commonly used in the wire mesh industry. Aluminum alloys are composed primarily of aluminum, and also contain...

Friday, May 10, 2024

Cement ball mill is the key equipment for recrushing the materials after they are primarily crushed. It is widely used for the dry type or wet type grinding of all kinds of ores and other grindable materials in cement, silicate product, new building material, refractory, fertilizer...

Thursday, May 09, 2024

Anping Tenglu metal Wire Mesh Co.LTD Crimped Wire Mesh/Double Crimped Wire Mesh/Wire Netting Wire Materials: stainless steel wire, brass wire, high carbon steel wire, galvanized iron wire, galvanized steel wire, non-ferrous metal wire, high quality 65Mn(65 Mananese steel) Weaving Patterns...

Wednesday, May 08, 2024

PP/PE filled with calcium carbonate making extruder Features of the twin screw extruder 1. Die face hot cutting system 2. Highprecision gearbox, high bearing capacity, smooth transmission, low noise. 3. New barrel and screw design, better melting, low-temperature melting and higher yields...

Wednesday, May 08, 2024

Quantity : 1 - Price : 62000 USD

PE/PP/ABS/PVC filler with calcium carbonate/CaCO3 plastic extruder machine Applications: co-torating twin screw extrusion can be uesd to make different kinds of plastic pellet/ granules: color masterbatch,compounding masterbatch and so on.Then this masterbatch could be mould into...

Wednesday, May 08, 2024

Quantity : 1

PET clean flakes recycling extruder machine Features of recycling extruder machine 1.the raw material of recycling extruder machine has to be PET clean/wahsed, flake/grinded/milled in small piece. 2.the throughput of the recycling extruder is always lower than other applications...

Tuesday, May 07, 2024

Quantity : 34 - Price : 2 342,00 €

Malaysia Desktop Universal Tensile Tester Servo Tensile Tester/technical parameters: Model: AS-PC-Volume Capacity (Kg): 50,100,200,500,1000,2000,5000,10000,2000 0 Load Accuracy: 0.5% Speed Accuracy: ±0.5% Weight (Kg)：300 Power AC220V 1 3 lines;AC380V 3 5 lines Motor: AC servo motor...

Tuesday, May 07, 2024

Quantity : 34 - Price : 2 342,00 €

Tensile Tester for navigation Computer Servo Tensile Tester /technical parameters: Model: AS-PC-Volume Capacity (Kg): 50,100,200,500,1000,2000,5000,10000,2000 0 Load Accuracy: 0.5% Load Resolution: 1/100,000 Valid Width (mm): 400 Motor: AC servo motor Volume W*H*D (mm): 1750*3310*1220...

Tuesday, May 07, 2024

KEYING Miniature Unmounted flap wheel sander home depot are characterized by high elasticity, high performance, and strong grinding force. The Standard Unmounted Flap Wheel can meet the needs of most customers, mainly used in mechanical processing, hardware, casting, auto parts, aviation...

Sunday, May 05, 2024

◆Used for bank vaults and ferrous device,wooden board,iron plate,and flat glass ◆Acoustic vibration sensor to detect ◆Apply to a variety of environments, materials ◆Special filtering technology to effectively prevent false positives ◆Vibration sensing and vibration analysis are integrated...

Sunday, May 05, 2024

Square gyratory sifter machine is a high-efficiency screening equipment specially designed for high precision and large capacity output.It is widely used in sand, mining, chemical, non-ferrous metals, food, quartz sand, abrasive and other industry and fields. The gyratory sifter mesh...

Saturday, May 04, 2024

A&S Hydraulic Co., Ltd supplies all types of Rexroth Hydraulic Cylinders: Rexroth Hydraulic Cylinder Mill Type Series CDM1 / CGM1 / CSM1 Rexroth Hydraulic Cylinder Mill Type Series CDL2 Rexroth Hydraulic Cylinder Mill Type Series CDH1 / CGH1 / CSH1 Rexroth Hydraulic Cylinder Mill...

Saturday, April 27, 2024

Gluconate refers to a compound that is derived from gluconic acid. Gluconic acid is a naturally occurring organic acid that is produced via the oxidation of glucose. Gluconate compounds are commonly used in various industries and applications due to their versatile properties. They...

Saturday, April 27, 2024

Ferrous gluconate is available as light yellow-gray or slightly gray-greenish-yellow granules or powder with a subtle caramel-like aroma. Its aqueous solution can be stabilized by incorporating glucose. It shows easy solubility in water (approximately 10g/100ml in warm water) while...

Thursday, April 25, 2024

SLAG POT Both ferrous and non-ferrous metallurgical enterprises produce a large amount of high-temperature liquid slag, and the vast majority of steel furnace manufacturers use slag bags (or slag pot and slag tanks) to load and process slag. Before the birth of welding slag ladle technology...

Thursday, April 18, 2024

Chrome, white, generally exists in the form of chromium iron compounds in the nature, the iron black or dark brown, block shape, dot, lenticular, ribbon, etc. Chromium is a very versatile metal. Chromium is a pure chromium metal that is refractory (melting point 1800℃) and has a specific...

Thursday, April 18, 2024

Ferroalloy is a general term for alloys composed of iron and silicon, manganese, chromium, titanium, tungsten, molybdenum, tantalum, niobium and other elements. It cannot be used to cast parts directly, but only as a reducing agent or additive in the casting or steelmaking process...

Thursday, April 18, 2024

Chrome, white, generally exists in the form of chromium iron compounds in the nature, the iron black or dark brown, block shape, dot, lenticular, ribbon, etc. Chromium is a very versatile metal. Chromium is a pure chromium metal that is refractory (melting point 1800℃) and has a specific...

Tuesday, April 16, 2024

The main CV joint bearing is ball cage type, designed and developed BJ, BHJ, BJS, BC, DOJ five categories, compared to NTN, the model specification is more complete, for different fields, use conditions, almost all can choose the appropriate coupling. In the field of vehicles, unlike...

Tuesday, April 16, 2024

Constant Velocity Joint is the advantage product of BOYA, which is very welcomed by design institutes. Because of the characteristics of high accuracy, constant speed, stable movement, long working life and so on, universal joint shaft is accepted by more and more customers. Both...

Thursday, April 11, 2024

Garnet abrasive sand is made of garnet raw materials after crushing and screening. It is an island-like structure of aluminum (calcium) silicate, which has the characteristics of high hardness, strong grinding force, acid and alkali resistance, and high-temperature resistance. Black...

Tuesday, April 09, 2024

Quantity : 500000000 - Price : 0.55-2.5 usd

FUNGOM Spray Paint Wholesale As one of the leading wholesale spray paint suppliers, our spray paint products are rich in variety, and customers can customize and purchase them according to actual conditions. Spray paint safety data sheet products of different net weights and volumes...

Monday, April 08, 2024

Magnets find several applications in mechanical engineering. Here are some common uses of magnets in this field: Magnetic Bearings Magnetic bearings are used in rotating machinery, such as turbines, compressors, and high-speed motors. These bearings utilize magnetic levitation to...

Monday, April 08, 2024

Separation using a magnet is a process of separating magnetic materials from non-magnetic ones based on their magnetic properties. Magnetic separation is commonly used in various industries, including mining, recycling, food and beverage, pharmaceuticals, and more. The process involves...

Thursday, April 04, 2024

Tube Laser Cutting Machine Remcor steel pipe laser cutting machine solutions can certainly meet all of your metal laser steel pipe cutting demands. Can be used for processing of circular tube, square tube and other kinds of special shape products. REMCOR Apollo series three chucks...

Thursday, April 04, 2024

Tube Laser Cutting Machine Remcor steel pipe laser cutting machine solutions can certainly meet all of your metal laser steel pipe cutting demands. Can be used for processing of circular tube, square tube and other kinds of special shape products. REMCOR Apollo series three chucks...

Tuesday, March 19, 2024

Price : 4-10000USD

Polycrystalline Diamond Composite (PDC) merges thin layers of diamond with a cemented carbide base, blending diamond's wear resistance with carbide's impact resilience. Its perpetually sharp edge excels in oil and geological drilling within soft to medium-hard formations. Our products...

Tuesday, March 19, 2024

Price : 4-10000USD

Polycrystalline Diamond Composite (PDC) merges thin layers of diamond with a cemented carbide base, blending diamond's wear resistance with carbide's impact resilience. Its perpetually sharp edge excels in oil and geological drilling within soft to medium-hard formations. Our products...

Friday, March 08, 2024

※ Source Manufacturer The Richconn was established in 2009 and is a professional precision anodizing company. ※ Mature Technology Complex and difficult surfaces and functional structures can be quickly formed while maintaining precision and originality. ※ Precision Manufacturing Protected...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

CNC Machining Nylon Nylon is also called polyamide, and its abbreviation is PA. Nylon is a general term for thermoplastic resins containing repeating amide groups [NHCO] in the main chain of the molecule. It is a tough, angular, translucent or milky white crystalline resin. Nylon...

Tuesday, March 05, 2024

Quantity : 1000TONS/M - Price : $5-100/kg

C44300 Copper Alloy Pipe ASTM B111 C44300 tube is widely used in the surface condenser, heat exchanger, and evaporators. The C44300 tube offers high strength, excellent corrosion resistance, and good creep resistance at elevated temperatures. SB111 C44300 TUBE SPECIFICATION COUNTRY...

Wednesday, February 28, 2024

Molybdenum spray wire is mainly refers to the wire cutting processing with high pressure electric field continuous movement to cut the workpiece made of molybdenum and other precious metal consumables, that is wire cutting machine tool processing workpiece continuous movement of fine...

Friday, February 23, 2024

Quantity : 5000-40,00 - Price : USD10-USD2,000/pc

E-Grind Abrasives developed diamond blade cut off wheel/CBN cut off blade for grinder to achieve more efficient and precision cutting. Our general bond can be used for both wet cutting and dry cutting. E-Grind Diamond cut off wheel for grinder is for cutting carbide, alloy material...

Thursday, February 22, 2024

china garnet abrasive sand is made of garnet raw materials after crushing and screening. It is an island-like structure of aluminum (calcium) silicate, which has the characteristics of high hardness, strong grinding force, acid and alkali resistance, and high-temperature resistance...

Thursday, February 22, 2024

Both ferrous and non-ferrous metallurgical enterprises produce a large amount of high-temperature liquid slag, and the vast majority of steel furnace manufacturers use slag bags (or slag pot and slag tanks) to load and process slag. Before the birth of welding slag ladle technology...

Wednesday, February 21, 2024

In electroplating, ruthenium iridium titanium anodes coated with precious metal oxides, such as iridium, play a crucial role as positive electrodes. These anodes exhibit high electrochemical catalytic performance, forming an essential part of the current transmission circuit. They...

Monday, February 19, 2024

ROLL BONDED CLAD PLATE The Roll Bonded Clad Plate is the metal clad plate processed under the rolling mill's strong pressure. The backer and cladding metal's oxide layers are ground down and form a clean and activated fresh metal. The diffusion of the two metals during rolling achieves...

Monday, February 19, 2024

NICKEL AND NICKEL-BASE ALLOY SHEET Nickel is a nearly silver-white metal with a density of 8.9g/cm³. With melting point 1455℃ and boiling point 2730℃. It is hard, magnetic and has good plasticity. Nickel is malleable and ferromagnetic metal element, it can be highly polished and corrosion...

Saturday, February 10, 2024

Happy Chinese New Year! May the Year of the Dragon bless you with good fortune, prosperity, and thriving opportunities. Our recycling group boasts a legacy spanning four generations in the recycling industry. We maintain a steadfast commitment to recycling various materials, including...

Tuesday, February 06, 2024

Rotary shot blasting machine or table type shot blasting machine is suitable for various shapes and dimensions, casts, forged parts, pressed parts, steel, and non-ferrous metal parts and parts made from fragile materials, cleaning surface, removing casting sand and filings, consolidating...

Tuesday, February 06, 2024

Wire mesh shot blasting machine or conveyor belt shot blasting machines is suitable for continuous blasting thin and collision-sensitive die castings, pressure castings, ferrous and non-ferrous castings, forgings, automotive accessories, and weldments. Workpiece weight ranging from...

Monday, February 05, 2024

Diamond Wire Drawing Die Blanks E-Grind is one of professional wire drawing dies suppliers , we provide two series of PCD wire drawing die blanks : CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is...

Monday, February 05, 2024

E-Grind Superabrasives Product As one of the most professional abrasive powder suppliers in China, E-Grind offers a full range of superabrasives: Synthetic diamond, Cubid Boron Nitrid and related Solid products like CVD, TSP, PDC, PCD&PCBN, Diamond Wire-Draing Die blanks, for Drilling...

Monday, February 05, 2024

PCD PCBN E-Grind supplies the whole range of PCD blanks and PCDN blanks for cutting tool purpose. The largest Diameter of PCD cutting tool blanks and PCDN cutting tools blanks available can be 55mm. Our PCD metal blanks and PCDN blanks provide high wearing resistance ability and...

Saturday, February 03, 2024

DIN 1587 Metal Acorn Nuts DIN 1587 hex acorn nut introduction: DIN 1587 nut is a nut with a cap. Its function is to prevent foreign impurities and moisture from invading the interior and causing corrosion and rust. At the same time, in places where some industrial machinery often...

Friday, February 02, 2024

Constant Velocity Joint is the advantage product of BOYA, which is very welcomed by design institutes. Because of the characteristics of high accuracy, constant speed, stable movement, long working life and so on, constant velocity joint is accepted by more and more customers. Both...

Friday, February 02, 2024

The main CV joint bearing is ball cage type, designed and developed BJ, BHJ, BJS, BC, DOJ five categories, compared to NTN, the model specification is more complete, for different fields, use conditions, almost all can choose the appropriate coupling. In the field of vehicles, unlike...

Friday, February 02, 2024

Ball Joint Bearing for Petrochemical Industry BOYA's ball joint shaft are widely used in the field of electric and diesel drives for oil drilling and production. The CV ball joint used are fracturing skids, pumping machines (commonly known as kettles), workover machines, drilling rigs...

Friday, February 02, 2024

BOYA multi-roll leveler is the core equipment of finishing process in metallurgical hot and cold rolling mill. By repeatedly bending and convex straightening of the strip, the strip can be straightened with high strength and precision; Widely used in high strength steel, precision steel strip...

Sunday, January 21, 2024

SWS-25A 15-30KHZ 25KW Induction Heater To realize the better performance of SWS-25A, JKZ has designed a fully digital control induction heating generator at the frequency range of 15~30KHz. It is designed with a maximum single machine power of 250KW and can be integrated with a state...

Sunday, January 21, 2024

MFS-300A 1-8KHZ 300KW 460A Medium Frequency Induction Heating Machine MFS-300A induction heating equipment is an IGBT type medium frequency induction heating furnace. The maximum output power of this machine is 300KW, and its working frequency is at the range of 1-10KHZ. Normally...

Sunday, January 21, 2024

Which Heating Is Used for Melting Non Ferrous Material? Non-Ferrous Metal Induction Melting JKZ's non ferrous metal melting furnace can firm the current directly on the graphite crucible or directly on the metal, thereby greatly reducing the heat loss on the furnace itself. With the...

Sunday, January 21, 2024

Quantity : 300/set pe - Price : 800-30000$

Excavator mounted grapples is the tools pick up, move and sort materials of all shapes and sizes, such as logs, rock and bulky scrap steels. We have log/stone grapples, scrap grapples, and excavator selector grab. All SC digger grapples has 360° rotation with large grab capacity which...

Saturday, January 20, 2024

Polyhexadiohexylenediamine, commonly known as nylon-66, is a thermoplastic resin, commonly made from polycondensation of adipic acid and hexadiamine. Insoluble in general solvents, only soluble in resorcinol, etc.High mechanical strength and hardness, high rigidity. Can be used as...

Friday, January 19, 2024

Quantity : 80000000 c - Price : US$0.5-US$2

7CF® car penetrating oil attacks corrosion to free corroded fasteners & mechanical components. A powerful, concentrated car penetrating oil that penetrates, loosens, cleans & lubricates. As one of the most professional penetrating oil manufacturers in the world, we provide...

Tuesday, January 09, 2024

Price : 0.1USD-60USD

KEYING Mounted Head is made of imported raw materials and special equipment with automatic production and excellent quality. These products are designed to meet the needs of individual grinding tool applications and come in a wide range of particle types, granularity, hardness levels, and shapes...

Tuesday, January 09, 2024

Price : 0.1USD-60USD

KEYING Mounted Head is made of imported raw materials and special equipment with automatic production and excellent quality. These products are designed to meet the needs of individual grinding tool applications and come in a wide range of particle types, granularity, hardness levels and shapes...

Tuesday, January 09, 2024

Price : 0.1USD-60USD

KEYING Mounted Head is made of imported raw materials and special equipment with automatic production and excellent quality. These products are designed to meet the needs of individual grinding tool applications and come in a wide range of particle types, granularity, hardness levels and shapes...

Tuesday, January 09, 2024

Price : 0.1USD-60USD

KEYING Mounted Head is made of imported raw materials and special equipment with automatic production and excellent quality. These products are designed to meet the needs of individual grinding tool applications and come in a wide range of particle types, granularity, hardness levels and shapes...

Tuesday, January 09, 2024

Price : 0.1USD-60USD

KEYING Mounted Head is made of imported raw materials and special equipment with automatic production and excellent quality. These products are designed to meet the needs of individual grinding tool applications and come in a wide range of particle types, granularity, hardness levels, and shapes...

Thursday, December 28, 2023

6061 Aluminium Tube aluminium round tube is a kind of non-ferrous metal tube, which is made of pure aluminum or aluminum alloy by extrusion and is hollow along its longitudinal length. It can have one or more closed through holes with uniform wall thickness and cross section. Application...

Thursday, December 28, 2023

Intelligent door lock is an improved lock which is different from the traditional mechanical lock and is more intelligent and simple in user safety, identification and management. Intelligent door lock is the executive part of door lock in access control system. Different from the...

Thursday, December 28, 2023

MIM stand for Metal Injection Molding, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC, MIM...

Thursday, December 28, 2023

MIM injection molding metal shaft can reduce the volume of the finished product and the production cost of the rotating camera. Rotating Cam Specifictions Product key words: Rotating Cam,camshaft rotation, Materials: 4605,Fe8Ni Requirements: polishing, sand pulling, sand blasting...

Thursday, December 28, 2023

RJ45 is a kind of information socket connector in wiring system. The connector is composed of plug (connector, crystal head) and socket (module). The plug has 8 grooves and 8 contacts. RJ is short for registered jack. JLY proviedes many types of rj45 connector cover, for example,...

Thursday, December 21, 2023

We always need the following scrap grades for our Asian recycling plants -electric meters -electric motors -transform -silicon sheet -shredded motor, shredded wires, shredded non-ferrous -automobile starter, alternator, ac compressor, engine, electronic parts -circuit boards, low grade boards...

Tuesday, December 05, 2023

This is the copper cnc machine recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 56mm*45mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Large Part Machining Services 1. Parts up to 180″ x 90″ (CNC Controlled) 2. Parts...

Saturday, December 02, 2023

Quantity : 8000kgs - Price : USD0.025 - USD1.05

Diamond Wire Drawing Die Blanks E-Grind is one of professional PCD wire drawing dies suppliers and diamond dies manufacturers, we provide two series of PCD wire drawing die blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25...

Saturday, December 02, 2023

Quantity : 8000kgs - Price : USD0.025 - USD1.05

E-Grind Superabrasives Product As one of the most professional abrasive powder suppliers in China, E-Grind offers a full range of superabrasives: Synthetic diamond, Cubid Boron Nitrid and related Solid products like CVD, TSP, PDC, PCD&PCBN, Diamond Wire-Draing Die blanks, for Drilling...

Saturday, December 02, 2023

Quantity : 8000kgs - Price : USD0.025 - USD1.05

PCD PCBN E-Grind supplies the whole range of PCD blanks and PCDN blanks for cutting tool purpose. The largest Diameter of material PCD and PCDN material blanks available can be 55mm. Our PCD cutting tool blanks and PCDN blanks provide high wearing resistance ability and high finishing surface...

Friday, December 01, 2023

Quantity : 5000-40,00 - Price : USD10-USD2,000/pc

Resin bonded grinding wheels are generally divided into resin bond diamond grinding wheels and resin bond CBN grinding wheels according to abrasives. E-Grind's resin grinding wheels have long service life, excellent self-sharpening ability and good shape retention, high grinding efficiency...

Thursday, November 30, 2023

CIC Customized and Intelligent Equipment in Minerals & Mining Processing Mineral resources are the precious wealth endowed by nature and the material basis for social development and human survival. With the progress of society, the types and quantities of minerals used by human...

Thursday, November 30, 2023

In recent years, with the continuous development of grinding technology, wet grinding has become the mainstream process, overflow type ball mill is the most widely used equipment in wet grinding. Overflow ball mill is mainly used for wet ball mill. In the grinding process, raw materials...

Thursday, November 30, 2023

CIC main advantage in nonferrous metallurgical furnace lies in the manufacture of horizontal rotary furnace, Rotary refining furnace and bottom blown furnace. Rotary furnace is the main metallurgy furnace equipment used to treat copper and nickel sulfide in nonferrous metallurgical production...

Wednesday, November 15, 2023

Type 27 is ideal for generating a smooth finish on flat areas or outside edges. Constructed for rapid stock removal on welds and other similar ferrous-based materials, our standard high grit flap disc can reduce discoloration on stainless and high nickel alloys. The overlapping cloth...

Wednesday, November 15, 2023

Type 27 is ideal for generating a smooth finish on flat areas or outside edges. Constructed for rapid stock removal on welds and other similar ferrous-based materials, our Standard Flap Disc can reduce discoloration on stainless and high nickel alloys. The overlapping cloth flaps...

Wednesday, November 15, 2023

Fan Type Wool Disc is specially designed for mirror finishing & polishing requirements. It's different like normal flap discs and the disc's density can be 2.0g/cm3 to 8.0g/cm3 which provide cooler & flexible polishing performance. It can be used to eliminate scratches and...

Wednesday, November 15, 2023

Flat Type Wool Disc is specially designed for mirror finishing & polishing requirements. It's different like normal surface conditioning flap discs and the disc's density can be 2.0g/cm3 to 8.0g/cm3 which provide cooler & flexible polishing performance. It can be used to...

Thursday, November 09, 2023

Description of Copper Cathode Copper is one of the basic chemical elements. In its nearly pure state, copper is a reddish-orange metal known for its high tNow the price of copper cathodes for sale is reasonable, if you have needs, please contact us.hermal and electrical conductivity...

Friday, November 03, 2023

CX2020A high-frequency induction heating converter is designed to work at the frequency range of 50~120KHz and its output power range is 10KW. It is often used for induction brazing, welding, small parts forging heating and heat treatment. The core component of this high frequency...

Friday, November 03, 2023

BOYA Tension leveler is the core equipment to leveling and shaping strip in cold rolling mill various process lines such as pickling line/pickling and tandem mill, Continue annealing line, galvanizing line, tinning line, color coating line, finishing lines etc. By stretching, bending...

Tuesday, October 31, 2023

Quantity : 500tons - Price : USD0.015-----USD100

The pot magnets under this category are featured with internal threaded bushings (threaded stud), magnetic strength are provided by the world's strongest disc magnets. This is one of the most popular types of pot mounting magnets. Threaded bushings are changes with the size of the disc magnets...

Saturday, October 28, 2023

Products Diaphragm Fabric Cloth for Nickel Mine Bolian electrolytic diaphragm cloth products are used in the electrolytic refining process of non-ferrous metals and other various industrial and mining processes under sulfuration and chlorination systems. With over 20 years of production...

Thursday, October 26, 2023

Molybdenum wire is mainly refers to the wire cutting processing with high pressure electric field continuous movement to cut the workpiece made of molybdenum and other precious metal consumables, that is wire cutting machine tool processing workpiece continuous movement of fine metal...

Wednesday, October 25, 2023

2.4G Magnetic wireless band antenna delivers marked improvements in efficiency and gain across all common frequencies (2400-2483MHz) in use for WIFI and Wireless bands. Small enough to be used indoors and outdoors, the antenna performance has been designed to take advantage of any...

Saturday, October 21, 2023

Quantity : 10mg-10t - Price : 50-15000

Luminol, also called 3 aminophthalic hydrazide and its derivatives are redox-type chemiluminescence reagents, which can be oxidized by various oxidants under alkaline conditions, such as H2O2, K2S2O8, etc., and a chemiluminescence reaction will occur to emit blue light. Because...

Saturday, October 21, 2023

Strongest Double Sided Fishing Magnet 136mm 2*600Kgs Item Code DSMR-D136 Diameter(D) 136 Height(H) 40 Threaded Hole (M) M12/10 Magnetic Force(kgs) 600*2 Weight(kg) 4.38 136mm 2*600kgs Double Sided Fishing Magnets Introduction High-powered fishing magnets double sided...

Saturday, October 21, 2023

Atlas metal manufactures high-quality precision shaft, available off-the-shelf or made to your exact needs. Atlas metal offers you all kinds of precision machining, milling, tapping and drilling in aluminum, stainless steel, steel alloys, and titanium. Types of Precision Shaft Fan...

Wednesday, October 11, 2023

Quantity : 1000000pcs - Price : 1000000pcs

KEYING 1000 grit flap wheel M14 is manufactured from high-quality domestic cloth and pure imported cloth, this product uses imported binder (glue), this series of products have high performance, strong grinding force, synchronous consumption stability, long service life, minor dust...

Wednesday, October 11, 2023

Quantity : 1000000pcs - Price : 0.1USD-60USD

KEYING 40mm flap wheel M14 is manufactured from high-quality domestic cloth and pure imported cloth, this product uses imported binder (glue), this series of products have high performance, strong grinding force, synchronous consumption stability, long service life, minor dust,...

Wednesday, October 11, 2023

Quantity : 1000000pcs - Price : 1000000pcs

KEYING Flap Wheel M14 is manufactured from high-quality domestic cloth and pure imported cloth, this product uses imported binder (glue), this series of products have high performance, strong grinding force, synchronous consumption stability, long service life, minor dust, beautiful appearance...

Wednesday, October 11, 2023

Price : 4-10000USD

(PDC)Polycrystalline diamond composite is a composite material in which thin layers of polycrystalline diamond are bonded to a cemented carbide substrate. Polycrystalline diamond composites combine the high wear resistance of polycrystalline diamond with the high impact resistance...

Monday, October 09, 2023

Vt series CNC tapping machine center is a vertical drilling center independently designed and developed by our company. The CNC drilling and tapping machine center has the structural characteristics of high speed, high precision, high rigidity, and high reliability. CNC drill tap...

Friday, September 15, 2023

Pump control valves are automatic control valves used to minimize surges associated with the starting and stopping of pumps. Opening and closing speed controls are adjustable. They can be configured with backpressure, rate-of-flow, or pressure reducing features. In the production...

Saturday, September 09, 2023

precision leveling equipment BOYA multi-roll precision leveler is the core equipment of finishing process in metallurgical hot and cold rolling mill. By repeatedly bending and convex straightening of the strip, the strip can be straightened with high strength and precision; Widely...

Thursday, September 07, 2023

E-Grind is a professional PCD wire drawing dies supplier and manufacturer, we provide two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is PCD Wire Drawing Dies Used for...

Thursday, September 07, 2023

As one of the most professional abrasive powder suppliers in China, E-Grind offers a full range of superabrasives: Synthetic diamond, Cubid Boron Nitrid and related Solid products like CVD, TSP, PDC, PCD&PCBN, Diamond Wire-Draing Die blanks, for Drilling, Sawing, Cutting, Grinding...

Thursday, September 07, 2023

E-Grind supplies the whole range of PCD blanks and PCD PCDN for cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanks provide high wearing resistance ability and high finishing surface. Application of PCD Blanks...

Wednesday, September 06, 2023

It is kind of creative to put clip and pot magnet together to make our lives handy. We really need to use our brilliance to bring out more of this combination. Now we just have one size of metal magnet clips for each product as shown on the web page and it is because most users are...

Tuesday, September 05, 2023

Aluminum Ingot Uses Aluminum is a silver-white metal and ranks third in the earth's crust after oxygen and silicon. The density of aluminum is relatively small, only 34.61% of iron and 30.33% of copper, so it is also called light metal. Aluminum is a non-ferrous metal whose output...

Saturday, September 02, 2023

Quantity : 200 sets/m - Price : 6893-27573 USD

Rotary Table Shot Blasting Machine for Sale Rotary shot blasting machine or table type shot blasting machine is suitable for various shapes and dimensions, casts, forged parts, pressed parts, steel, and non-ferrous metal parts and parts made from fragile materials, cleaning surface...

Friday, August 11, 2023

Bolian is experienced in the electrolytic filtration field with over 25 years of diaphragm production experience. Yearly output of electrolytic cathode filter cloth and electrolytic anode filter cloth is 500,000 square meters. Electrolytic Diaphragm Fabric Electrolytic Diaphragm Bags...

Tuesday, August 08, 2023

On the mounted flap wheel for drill, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth...

Tuesday, August 08, 2023

The flexibility of 8 inch flap wheel enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing material through a resin adhesive. Flap Wheel 3/8inch Specification: Diameter: 3/8 inch=10mm Max. RPM: 25000 RPM Raw Materials...

Tuesday, August 08, 2023

On the mounted abrasive flap wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Tuesday, August 08, 2023

On the Mounted Small Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Tuesday, August 08, 2023

On the Mounted Emery Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Tuesday, August 08, 2023

On the Mounted Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing material...

Tuesday, August 08, 2023

On the mounted aluminium oxide flap wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible...

Thursday, July 27, 2023

In recent years, with the rapid development of die and mould industry, graphite materials, new processes and increasing die and mould factories are constantly impacting the die and mould market. Graphite has gradually become the preferred material for die and mould production with...

Thursday, July 27, 2023

Graphite mould casting refers to the mold used to form castings in graphite mold casting process. The main gravity casting molds include high-pressure casting mold (die casting mold), low-pressure casting mold, extrusion casting mold, and so on. Casting mold is one of the most important...

Thursday, July 27, 2023

Graphite crucible for melting silver, graphite crucible for melting gold, graphite crucible for melting copper uses graphite as the main raw material and plastic refractory clay or carbon as binder processing. This kind of graphite crucible is mainly used for gold, silver, copper...

Thursday, July 27, 2023

For the woodworking industry, E-Grind Abrasives developed dozens of bonds for different applications. Grind Resin bond diamond sharpening wheel for grinder are used for grinding Tungsten Carbide tipped Saw blades including the resharpening process. CBN cup grinding wheels are used...

Wednesday, July 12, 2023

Modified epoxy non ferrous metal primer is an anti-rust primer composed of epoxy resin, anti-rust pigments, additives and curing agent. It is mainly used for galvanized surfaces, aluminum and aluminum alloy, stainless steel and other surfaces as connecting paint. It is with good adhesion...

Wednesday, July 05, 2023

Quantity : 100000 - Price : 1000-1000000

Weidouli titanium butterfly valves can be available in casting or forging type. Recently Weidouli supplied lots forging titanium butterfly valves for mining and desalination. Titanium Butterfly valves come typically in wafer or lug style. However it is no uncommon to see a flanged...

Wednesday, July 05, 2023

China garnet abrasive sand is made of garnet raw materials after crushing and screening. It is an island-like structure of aluminum (calcium) silicate, which has the characteristics of high hardness, strong grinding force, acid and alkali resistance, and high-temperature resistance...

Wednesday, July 05, 2023

ASTM B111 C44300 tube is widely used in the surface condenser, heat exchanger, and evaporators. The C44300 tube offers high strength, excellent corrosion resistance, and good creep resistance at elevated temperatures. SB111 C44300 TUBE SPECIFICATION COUNTRY STANDARD NAME ASTM...

Saturday, July 01, 2023

Remcor Apollo BK series three chuck tube lazer cutting machine can cut all types of metal tubes, from mild steel to stainless and also non-ferrous metals. It is also valid for cutting some reflective metals like aluminum, brass and copper, etc. The thickness of the metal can be anywhere...

Saturday, July 01, 2023

Remcor 3 in 1 laser welding machine and cleaning machine integrates three functions. One machine can get the multi-purpose, it's much more cost saving on machines, labors and spaces. Apply with a continuous laser source, which can have 3-5 times faster in welding speed and cleaning...

Thursday, June 29, 2023

Quantity : 1-1000PCS - Price : 500-10000￥

With the adding number of vehicles on our roads, it has become more critical than ever to reduce weight to increase energy effectiveness and reduce CO2 emissions, a typical way in which manufacturers are achieving this aim is by using automotive parts die casting. Die casting in automobile...

Thursday, June 29, 2023

Price : $850~$2000 / ton

As defined by its main properties, copper offers excellent electrical and heat conductivity, and good corrosion resistance ability as well. But native copper is rarely to be used, it usually exists to be a copper-based alloy so that the other elements can help greatly reduce the casting defects...

Thursday, June 29, 2023

Price : $850~$2000 / ton

Aluminum is a lightweight metal with silvery-white color. Because of its chemical features, aluminum never exists in the metallic form in nature. But aluminum compounds are abundant, and with the development of modern extraction technology, now aluminum becomes one of the most widely...

Wednesday, June 28, 2023

In recent years, with the continuous development of grinding technology, wet grinding has become the mainstream process, overflow type ball mill is the most widely used equipment in wet grinding. Overflow ball mill is mainly used for wet ball mill. In the grinding process, raw materials...

Wednesday, June 28, 2023

CIC main advantage in nonferrous metallurgical furnace lies in the manufacture of horizontal rotary furnace, Rotary refining furnace and bottom blown furnace. Rotary furnace is the main metallurgy furnace equipment used to treat copper and nickel sulfide in nonferrous metallurgical production...

Tuesday, June 27, 2023

The sheet leveler machine of BOYA is not only rooted in the basic theory of material elastic-plastic deformation but also closely follows the world's cutting-edge technology. BOYA not only emphasizes learning from others but also insists on independent innovation. After years of specialized...

Tuesday, June 13, 2023

According to the internal structure of the faucet, it can be divided into single hole faucet, 2-hole faucet and three hole kitchen faucet, the difference lies in the number of water outlets. 3 hole kitchen faucet can also be subdivided into laboratory 3-hole faucets and general household...

Saturday, June 10, 2023

Quantity : 1000000pcs - Price : 0.1USD-60USD

Hard Felt Polishing Wheel With Shank 2-3/8 inch are used for pre-polishing and high-gloss polishing on small to medium-sized components. The felt buffing wheel structure is designed to fit the contours of the working surface and dissipate heat build-up. Felt Polishing Wheel With Shank...

Saturday, June 10, 2023

Quantity : 1000000pcs - Price : 0.1USD-60USD

Felt polishing wheel with shank 1 9 16inch Felt buffing wheel for drill 1-9/16 inch are used for pre-polishing and high-gloss polishing on small to medium-sized components. The hard felt polishing wheel structure is designed to fit the contours of the working surface and dissipate heat build-up...

Saturday, June 10, 2023

Quantity : 1000000pcs - Price : 0.1USD-60USD

Felt Polishing Mops With Shank 1-3/16 inch are used for pre-polishing and high-gloss polishing on small to medium-sized components. The hard felt wheel mandrel structure is designed to fit the contours of the working surface and dissipates heat build-up. Felt Polishing Wheel With...

Saturday, June 10, 2023

Quantity : 1000000pcs - Price : 0.1USD-60USD

The steel wool polishing wheel combined with polishing paste is used for pre-polishing and high-gloss polishing to work accurately in hard-to-reach places. The main use of steel wool buffing wheel is to the hard type of workpiece for pre-polishing processing, a soft type of workpiece...

Saturday, June 10, 2023

Quantity : 1000000pcs - Price : 0.1USD-60USD

KEYING felt polishing discs are mainly used in high-precision processing and manufacturing industries such as machining, hardware, casting, auto parts, aviation, bullet trains, and ships. It is especially suitable for cleaning the surface and convex grooves of non-ferrous metals, metals...

Thursday, June 08, 2023

Quantity : 200 tons - Price : 25usd-100usd

Ferroalloy is a general term for alloys composed of iron and silicon, manganese, chromium, titanium, tungsten, molybdenum, tantalum, niobium and other elements. It cannot be used to cast parts directly, but only as a reducing agent or additive in the casting or steelmaking process...

Thursday, June 08, 2023

Quantity : 200 tons - Price : 25usd-100usd

Chromium Metal for Sale Chrome, white, generally exists in the form of chromium iron compounds in the nature, the iron black or dark brown, block shape, dot, lenticular, ribbon, etc. Chromium is a very versatile metal. Chromium is a silver-white metal that is refractory (melting point...)

Saturday, June 03, 2023

automated deburring machine deburring machine manufacturers Solid wood panels are wood panels made of intact wood. These panels are durable and have natural textures. Wood panels are needed in the furniture manufacturing process. There are a lot of burrs on the surface of the panels...

Thursday, June 01, 2023

CVD (Chemical Vapor Deposition) diamond. The mixture of carbon-containing gas and oxygen is excited and decomposed at a high temperature and a pressure lower than the standard atmospheric pressure to form an active diamond carbon atom, and the deposit is alternately grown on the substrate...

Thursday, June 01, 2023

CBN micron powder has unique characteristics in thermal stability, working efficiency, and sharpness. It can be used in resin, metal, and vitrified systems, for precise grinding, polishing and finishing workpiece surface, PCBN blank manufacturing. It works as free grinding particles...

Thursday, June 01, 2023

CBN ranks the second in hardness following Diamond. CBN has premium performance in thermal conductivity, durability and chemical inertness. It is usually used for Ferrous Metal. E-Grind provides all types of CBN material including mesh and micron. CBN Mesh Powder for Sale CBN Mesh Powder...