Rubber Accelerator TMTD
Quantity : 10mt Price : usd1520/mt
Rubber Accelerator TMTD(TT)
Chemical Name Tetramethyl Thiuram Disulfide
Molecular Formula C6H12N2S4
Molecular
CAS No. 137-26-8
Specifications Q/KES018-2007
Item |
Specifications |
1st grade |
|
Appearance |
White or light yellow powder |
Initial Melting Point (℃)Min. |
140 |
Heat Loss (%)Max. |
0.3 |
Ash (%)Max. |
0.3 |
Residue on 150μm Sieve (%)Max.
|
0.1 |
Properties Density : 1.31~1.34g/cm3 ,Soluble in benzene, acetone, chloroform, a little soluble in , insoluble in water.
Applications Suitable for natural and synthetic rubber and latex, being a good secondary accelerator of kinds of thiazole, it is used with other accelerators to the continuous vulcanization. TMTD is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 175.105 and under BgVV XXI, Categories 1-4 and "Sonderkategorie".
Storage Store closed containers in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight.
Packing 25kg net paper bags lined with polyethylene film bags.
Contact : peng chris, +8651880817151
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Rubber Accelerator TMTD Search in a category : Raw materials Search in a category : tmtd, accelerator, rubber |
Friday, May 16, 2014
Quantity : 500000pcs - Price : $1-25/pc
Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...
Xiamen Karo Co.,Ltd
- karoplastic
- 361002 - Xiamen
- 0086 592 5135406
Friday, May 16, 2014
Quantity : 50000pcs - Price : $1-25/pc
Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...
Xiamen Karo Co.,Ltd
- karoplastic
- 361002 - Xiamen
- 0086 592 5135406
Thursday, June 16, 2016
Quantity : no - Price : retalked
roduct Description 1. Grade: Pure UHMWPE, 100% raw material 2. Standard Size: nO 3. Thickness : 3-500mm 4. Customized: As sample or drawing or description. Product Name marine shield fenders Material PE- UHMW( Ultrahigh Molecular weight Polyethylene) Color According...
Anyang Ultrahigh Industrial Technical Co., Ltd
- 455000 - anyang
- 03726299933