B2B Services - Export trade leads

Tuesday, November 18, 2014

Tundish coating of HN series is characterized by easy painting, no crack, erosion resistance, long service life and easy disassembly. Compared with using the insulation board, the tundish coating series can reduce nonmetallic inclusion in liquid steel, enhance cleanliness of liquid steel...

Tuesday, November 18, 2014

This plastic tube packaging is oval in 35mm with metalized screw cap mainly for BB cream, liquid foundation Characteristic: 1. Category: oval tube 2. Diameter: 35mm 3. Tube Length: Different tube length is available 4. Layer: Double layer 5. Material: Tube-PE Cap-PP 6...

Tuesday, November 18, 2014

Sliding plate fire clay has characteristics of good bonding and high refractoriness. It is the ideal material for filling sliding aperture. Physical and chemical indexes 牌号Brand HN-1 HN-2 HN-3 Al2O3 % ≥ 65 75 80 Cr2O3 %≥ 1.3 　 2 C %≥ 　 4 4 Location ...

Tuesday, November 18, 2014

Quantity : 2000 tons - Price : 70-400USD per ton

Steel flow initiator is a kind of ladle slid nozzle filler which is successfully developed by our company in recent years, results show that ladle castables success rate of automatic start casting can reach above 95 percent. There is no metallic inclusion in ingot surface, is a kind...

Tuesday, November 18, 2014

Ladle gunning mixer with high grade magnesia, spinel, special binder and additive. It is characterized by good adhesion, high bonding strength, low rebound rate, easy sintering, good corrosion and erosion resistance, and is ideal material for cold and hot repairing mixer and ladle slag line...

Tuesday, November 18, 2014

Ladle permeable well block of chrome corundum and corundum spinel series are characterized by good volume stability, high strength at high temperature, strong erosion resistance to molten steel and good thermal shock resistance. It can be designed and produced integral well block...

Tuesday, November 18, 2014

Alumina-carbon slide gates are characterized by high strength, erosion resistance and good thermal shock resistance. They are preferred products for large/middle ladle and continuous casting tundish. They can meet the needs of different steel grades. Physical and chemical indexes...

Tuesday, November 18, 2014

Ladle nozzle well block series are developed with the newest matrix optimization technology and the theory of the most compact. They are characterized by good thermal shock resistance, strong washout resistance, steady quality and long life etc. Physical and chemical indexes 牌号Brand...

Tuesday, November 18, 2014

Ladle upper/lower nozzle series are developed with the newest matrix optimization technology and the theory of the most compact. They are characterized by good thermal shock resistance, strong washout resistance, steady quality and long life. Physical and chemical indexes Brand...

Tuesday, November 18, 2014

Quantity : 1000 tons - Price : 300USD per ton

Ladle castables using with corundum aluminum magnesia spinel and fused magnesite as raw materials, which is made of micro-power technology and additive agent, are characterized by good construction function, high strength, good volume stability, erosion and washout resistance and...

Tuesday, November 18, 2014

Sand casting, the most widely used casting process, utilizes expendable sand molds to form complex metal parts that can be made of nearly any alloy. Because the sand mold must be destroyed in order to remove the part, called the casting, sand casting typically has a low production rate...

Tuesday, November 18, 2014

Low carbon magnesia carbon brick using with crystal magnesite, fused corundum, fused spinel, high purity and ultrafine graphite and nano composite antioxidant as raw materials, which are used for ladle slag line. Low carbon and carbon-free corundum spinel bricks are used for ladle...

Tuesday, November 18, 2014

Magnesia alumina carbon bricks, with high grade magnesite, corundum, spinel and graphite as raw materials, bonded by resin, are characterized by good slag resistance. The products are mainly used for ladle upper and lower slag line. Alumina magnesia carbon bricks, with high grade bauxite...

Tuesday, November 18, 2014

Quantity : 600 tons p - Price : 1300USD/ ton

Coil grout is a kind of painting material used for fused alumina recommended for application to the inside face of coreless induction furnace coils. Containing a red color is to distinguish the coil grout from the working lining. This product offers the following benefits and features...

Tuesday, November 18, 2014

The product is characterized by high corrosion and erosion resistance against molten steel and slag, dense sintered layer, long service life, low consumption of per ton steel, easy construction and repairing, and energy saving. Physical and chemical indexes Items Medium Frequency...

Tuesday, November 18, 2014

This company produces the lining material is called “mixed sand” for short. This product is the main refractories of the medium frequency induction furnace used by the small steel enterprises. Its effect is in leading position. Physical and chemical indexes Ingredients SiO2 ...

Tuesday, November 18, 2014

Electric furnace gunning mix with magnesia based and magnesia-calcium based material, binder and sintering agent, is characterized by high bonding strength, strong corrosion resistance and non-spalling. When hot repairing temperature is higher than 1000℃, hot repairing effect is...

Tuesday, November 18, 2014

Electric furnace prefabricated part is characterized by high strength, good thermal shock resistance, corrosion resistance, steady quality and long life, etc. Physical and chemical indexes 牌号Brand DLD-1 DLD-2 化学成分 Chemical composition/%,≥ Al2O3 85 80 Cr­­2O3 2 ...

Tuesday, November 18, 2014

Quantity : 700 tons p

Furnace bottom tapping hole fillers are steel fillers used in steel tapping hole of large eccentric furnace bottom. This product developed by our company is adapted to the need of increasing gradually in large-scale furnace in recent years, an ideal product to replace imported products...

Tuesday, November 18, 2014

Quantity : 500 tons p

Taphole brick is molded at isostatic pressure, with fused magnesia and graphite as raw material. It is characterized by good oxidation resistance, high strength, good corrosion resistance, good integrity, easy replacing and long life and it is ideal material taphole of large and medium furnace...

Tuesday, November 18, 2014

Die casting is a manufacturing process that can produce geometrically complex metal parts through the use of reusable molds, called dies. The die casting process involves the use of a furnace, metal, die casting machine, and die. The metal, typically a non-ferrous alloy such as aluminum or zinc...

Tuesday, November 18, 2014

Magnesia carbon brick series used for the electric furnace are made by adoption of fused magnetite, high-purity magnesium sand and graphite as principal raw material, through high-pressure molding and low-temperature treatment. This product is mainly used for electric furnace lining...

Tuesday, November 18, 2014

Investment casting can make use of most metals, most commonly using bronze alloys, stainless steel, and tool steel. This process is beneficial for casting metals with high melting temperatures that can not be molded in plaster or metal. Parts that are typically made by investment...

Tuesday, November 18, 2014

2 Stück 35W weiss 6000K Xenon D2S BRENNER LAMPEN |30034 Super Xenon Licht als ein ideales Zubehör an Ihrem Auto. Einen echten Quantensprung in Sachen Strassenausleuchtung hat Xenonlicht hier gebracht. Es spart ca. 30% Strom , doch bietet gegenüber Halogenlich eine grössere Lichtausbeute...

Monday, November 17, 2014

Quantity : 3000 tonne

bonjour, nous cherchons des grande volumes de fer ferraille pour la Tunisie, prière svp nous envoyer votre prix CIF port Tunis. merci Location : Route du Metline Km2, 7070 Ras jebel, Contact : elyess jelassi, +21 6 23 67 85 95

Monday, November 17, 2014

Bonjour, Je suis à la recherche d'un vendeur/grossiste d'ipod, iphone ou autre smartphone mais je cherche des produits cassés (vitre, lcd, bouton... ) Si vous correspondez à ma recherche merci de me contacter pour que l'on discute.   Merci. Location : Chemin...

Monday, November 17, 2014

Machine MATEK 12 mobile pondeuse, neuve pour la production des parpaings, hourdis, bordures. La hauteur min. de production c'est 175 mm La hauteur max. de production c'est 330 mm La production journalier et approximative de 9600 parpaings de 20x20x40/ 8heure Ainsi avec sa central...

Monday, November 17, 2014

Usine pour carreau a beton de grande capacite de production. Pour plus d'infos nous contacter Nous pouvons effectuer demontage transport Montage et mise en marche Location : , Talavera de la Reina, Contact : MATEK SULI, +34 6 54 87 57 92

Monday, November 17, 2014

En vente une central a béton achetée neuve pour un projet qui n'a jamais connue le jour. Le montage de cette centrale n'a jamais eu lieu La central est pour la production de 1500 litres/1cycle du béton, compose par: - 5 Ouvertures des trémies pour granulats. - 5 Tapie pesante en...

Monday, November 17, 2014

En vente machine fixe année de fabrication 2006 avec: - 5 Moules - 900 planches d'occasion de 1240 x 750 x40 - 360 planches neuve de 1240 x 750 x40 - 80 etagére pour stocker les planches a produits: - Production par une heure 1000 agglos (20x20x40) SERVICE ADDITIONNEL: Notre société...