Cooking Oil Purification Machine series COP

Application:

COP oil filtration machine is special for filtering waste cooking oil, dirty vegetable oil, trench oil, swill oil and animal oil etc. It effectively and completely removes particles, odor, water, acid and etc. from waste oil. The processed oil is clean, limpid with good smell. COP is a good purification machine for fry food factory, oil restaurant, cooking oil factory, vegetable oil factory and waste oil collecting store. According to the processed oil usages, we can choose different machine body. For edible usage, we suggest choosing stainless steel body; for industrial, we suggest choosing steel carbon body. According to different working places, we recommend skid type and mobile type (trailer with pneumatic tyre)

Features:

1.This plant is composed of two parts. One is the press filter, and the other one is the vacuum oil purifier system. The press filter can remove big and tiny impurity; The precision of purification can reach 1 Micro. The Vacuum system is equipped with three grades filter (primary filter, mass water separator, and fine filer). All process works under the vacuum condition.
2.For primary filter, which is made of the stainless steel, is anti-rust and anti-corrupt. It mainly removes residual impurities which escape from the press filter, making sure the oil not have any impurity when it goes into water separator and vacuum separator.
3. Water separator, which is equipped with special filter, mainly removes mass water from the oil, because usually waste cooking oil always contains much water, so we need to remove the mass from the oil. After the water separator, the oil just contains the tiny water and soluble water.
4.After the process of the water separator, the oil will goes into the vacuum separator, which adopts three-dimensional duplex evaporation and film evaporation. For protecting the oil nature, it is better that the oil temperature is lower than 80 C, because our machine works under the vacuum and low pressure condition, so it does not need to heat the oil to 100 ℃. Usually it just needs to heat the oil to 45 ℃, and then it can completely and effectively remove the tiny water, soluble water, acid, and other volatility liquid and so on.
5.The fine filter, which is equipped with the stainless steel filter, its purification hole is less then 1 Micro, which can make sure the oil is completely clear and without any impurity.