B2B Services
CHINA SINGULAR Grouting Agent |
Saving item |
Measurement unit |
Required index |
Detection value |
|||
adding 10% |
||||||
Fluidity (s)
|
Initial value |
18±4 |
17 |
|||
30min |
≤30 |
22 |
||||
Setting time
|
h |
Initial setting |
Final setting |
Initial setting |
Final setting |
|
≥4 |
≤24 |
6 |
10 |
|||
24 free expansion ratio |
% |
0-3 |
0.25 |
|||
28d flexural strength |
MPa |
7d |
28d |
7d |
28d |
|
35 |
50 |
42 |
55 |
|||
28d compressive strength |
MPa |
7d |
28d |
7d |
28d |
|
6.5 |
10 |
7.3 |
10.5 |
|||
Air content |
% |
1-3 |
1.3 |
|||
24 free bleeding rate |
% |
0 |
0 |
|||
Pressure bleeding rate |
% |
3.5 |
2.3 |
|||
Content of Cl ions |
% |
≤0.06 |
0.03 |
|||
III. Usage and main application
1. Manufacture of pre-stressed rebar, installation of anchorage device and fixture, exertion of pre-stress, and grouting shall meet design requirements, as well as tentative specification with respect to pre-stressed concrete precast beam in passenger transport line.
2. Referential water-cement ratio of mixing pre-stressed pipe grouting material cement paste shall be not larger than 0.34, recommended ratio is 0.29-0.32 and actual ratio shall be confirmed based on test. 80%-90% of actual mixing water shall be added into the mixer before starting its operation. Add the agent evenly while stirring it, and then all cement shall be also added evenly. All powders shall be added and subject to slow stir for 2min, then quick stir for 1min. The remaining 10%-20% mixing water shall be added and stirred for 1min.
3. The duration for which cement paste is stirred until pressed into the pore passage shall depend on temperature conditions, generally between 30-45min.
4. Grouting material shall be constantly stirred before usage and during grouting process.
5. It is used for grouting material filling post-tensioned beam pre-stressed pipe, preventing corrosion of pre-stressed steel, ensuring valid stress transfer between pre-stressed tendon and concrete structure, and making slurry in pore passage full and dense. Slurry shall be kept within certain PH scope and fully wrap the pre-stressed steel. After the hardening of slurry, it has quite high strength and elasticity modulus and expansion without contractility and adhesive strength.
6. It is suitable for filling and grouting of post-tensioned beam pre-stressed pipe, anchoring and grouting of ground anchor system, leakage-stopping and grouting of constant wall head and curtain grouting. Equipment foundation grouting, underboarding bed mortar and beam-to-column connection, engineering emergency repair and bolt anchoring, free-vibration and self-compacting, micro expansion, oil anti-permeability, anti-corrosion, freezing resistance and anti-permeability. It is used for pore grouting of high-strength steel pre-stressed concrete component and strengthening of road, bridge and beam. It is able to run after 24hours, and firmly bonded with hardened concrete without obvious remedying trace. Slurry setting time is able to be controlled, which means moderate,
IV. Precaution
1. Slurry temperature shall be kept between 5℃-30℃ when grouting, otherwise, relevant measures shall be taken to meet the conditions.
2. Accurately weigh pre-stressed pipe grouting material and water. Water shall be added in strict accordance with confirmed water-cement ratio, and it is not allowed to adjust the quantity at will.
V. Package and storage
1. Woven bag made of kraft paper (including lining), net weight: 40kg/bag.
2. Storage conditions: dry and cool warehouse; avoid water, moisture, breakage and high temperature (over 45℃).
3. Shipping conditions: avoid rain and solarization, package shall be in good condition. Shelf life: 6 months.
Good deal: buying from seller
This page is about importers and exporters of CHINA SINGULAR Grouting Agent Search in a category : B2B Services Search in a category : agent, grouting, singular, china |
Friday, July 01, 2022
Quantity : 500
Câble HDMI ethernet 3D pour télé plasma et LCD. Améliorez la qualité de votre système cinéma! Les télés LCD et à écran plasma 3D ont besoin de câble de très haute qualité. Les câbles HDMI de Reekin permettent de pousser au maximum la capacité de votre système cinéma. Ils sont également...
Tuesday, July 19, 2022
Price : 4 000,00 €
Buy the best Quality Stainless Steel Pipe Fittings. Sanjay Metal India is one of India's top Stainless Steel Pipe Fittings Manufacturer. SS Pipe Fittings Manufacturer are suitable for pipelines that are mounted in high-pressure, corrosion-prone, and vibration-prone environments.Sanjay...
Friday, February 23, 2024
High-quality materials and strict standards: The Bosoko T650A Front Frame Wiper Blades are IATF 16949 and ISO9001: 2015 certified, ensuring the product meets strict quality standards. Additionally, the rubber raw material is imported from Vietnam, further guaranteeing the high quality...