Wholesale eMMC153/169 socket with USB, nand flash test socket, size 11.5x13_0.5mm, fo...

Feature:

1. This eMMC socket is for BGA 169 and BGA 153 testing.

2. The main control chip is ITE IT1327, which is a USB 2.0 with multi partition of SD/MMC card reader controller, T1327 built-in SD/MMC card power supply. It also integrates 5v to 3.3v voltage regulator, high speed USB 2.0 interface and downward compatible with USB 1.1.

3. Support hot swap and a separate power supply switch.

4. Apply to eMMC of Samsung, Sandisk, Toshiba, Hynix, Micron, HTC, MTK and Intel.

5. eMMC data could be read and written fastly.

6. With 30 pins and pin pictch 0.5mm.

7. eMMC size of this product is 11.5x13mm, we also provide other sizes of

12x18mm

14x18mm

12x16mm

8. Apply to eMMC thickness of 0.8mm and 1.5mm.

9. Just insert the USB into your PC, it is easy use.

10. Accurate positioning on flat bottom pad and solder of eMMC.

11. Life cycle is around 25,000 times.

12. Support flat bottom and solder ball testing (with or without ball).

Maintenance and Repair :

Such as found in the process of using this product can't test or test performance is not stable, suggest using the following methods to solve :

1. Using air gun or SOCKET anti-static brush to inside impurity removal, make its good contact

2. With anhydrous cleaning SOCKET, the attached at the top of the shrapnel impurities clean, make its good contact

3. Found inside the SOCKET shrapnel have burn out or break, please buy the corresponding SOCKET replacement

4. USB interface cannot be detected, please check whether the power switch on or computer USB connect is normal

5. It is forbidden to use water, washing board that day water soaking and other organic solvents, cleaning, in order to avoid damage to the SOCKET internal structure

We're the original manufaturer , we can provide the lowest and competitive price , the shortest processing time is guaranteed , if you have any quotos or inquiry ,please contact us freely ! ! !