1258
Give your opinion
Read all reviews
Add to notepad
Print
  • 3.6/5
  • 1
  • 2
  • 3
  • 4
  • 5
Details
China Equipment goods

Report abuse

Equipment goods

Duct rodder

Specifications

1.Great Rigidity and Strength
2.Excellent Flexibility Force
3.ISO9001, various sizes
4.Anti-corrossion



TID Tech offers one of the most comprehensive range of Duct Rodders available anywhere in the world - from the smallest Φmm 4.5 to Φ16mm Duct Rodders.

Product Description

1.Material :

THE ROD

TID rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.

The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin.
The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.

alt

THE FraMes
Frames are also a feature of the TID Tech systems. a larger footprint for stability; steel brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width.

alt

Technical Specificat

2.Technical Specification

2.1.Glass reinforced Composite Core: general properties

Property

Value

Keinforcement

E-glass fiber

Glass content of inner part

75-80%

Material of pulling rod

epoxy fiber glass(inner) high density polyethylene(outer)

Density

>1.9gr/cm3

Diameter tolerance

+/-0.10mm

Work situation temperature

-40°C to +80°C

2.2.Mechanical Prperties

Property

Value

alt

Minimum pullling strength

4000 N+/-5%

Tensile modulus

>30000Mpa

Consistency of rod

150gr/m +/-5%

Flexural modulus

>30000M pa

Elongation at break

2.5-3%

2.3. Polyethylene Cover

Property

Value

Tensile strength

>15N/mm2

Environmental stress & crack resistance

>1000 hr.

Heat stability

OK.

Carbon black

OK.

Application:

Fiberglass duct rodders are used for communication and Drain cleaner and electric power pull.

alt

altroD seleCtIon

Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including:
• The size of ducting it is to be pushed through
• The distance the rod is to be pushed
• The number and tightness of bends in the ducting
• If the ducting is already occupied by cable
When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals. Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.

Location : West Dongfeng Dajie Rod ,Weinan High Technology Industrial Zone ,Shaanxi, 714000 Shaanxi,
Contact : Lucy Liu, +86 913 2112960

tidpower

  • 3.5/5
Retail
Registered since 27 September 2014

Identification number of the company : 07126458-0

Send email to tidpower

tidpower

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Duct rodder

Search in a category : Equipment goods
Search in a category :
duct, rodder
  • 1.8/5
  • 1
  • 2
  • 3
  • 4
  • 5
China 062150 B2B Services

Report abuse

Industrial Cyclone Dust Separation Collector
Industrial Cyclone Dust Separation Collector

Saturday, July 02, 2022

Cyclone Dust Separator Design Cyclone type dust collector is a type of dust removal device. The dedusting mechanism is to make the dust-containing air flow rotate, and the dust particles are separated from the air flow and trapped on the wall by means of centrifugal force, and then...

HEBEIOUTAI ENVIRONMENTAL PROTECTION EQUIPMENT CO.,LTD

  • 062150 - cangzhou
  • 0317 8288592
  • 1.9/5
  • 1
  • 2
  • 3
  • 4
  • 5
China 063000 B2B Services

Report abuse

Dental Lab Equipment
Dental Lab Equipment

Tuesday, March 08, 2022

Dental lab productsThe dental laboratory is a place to complete all the tasks that the patient does not participate in the oral medicine, such as making dentures, model making, polishing, etc. The laboratory with good conditions can carry out porcelain teeth, casting brackets, etc...

Tangshan UMG Medical Instrument Co.,Ltd.

  • umgroupen
  • 063000 - High-tech Zone
  • 0315 6314398
  • 3.3/5
  • 1
  • 2
  • 3
  • 4
  • 5
China 450003 Medical

Report abuse

CO2 fractional laser in aesthetic medicine
CO2 fractional laser in aesthetic medicine

Friday, April 28, 2023

The CO2 fractional laser is a gas laser with a wavelength of 10600nm, which works in a fractional mode, based on the principle of focal photothermal action. With many microscopic treatment holes produced by the specific laser, while the tissue around the microscopic holes remains...

Bestview Laser S&T Co.,Ltd

  • 450003 - Zhengzhou
  • 0086 19503862093
  • 0086 19503817280