EXPLOSION BONDED CLAD PLATE

Benefits of Explosion Bonded Clad Plate

a. The Explosion Bonded Clad Plate is the metal clad plate produced by the explosive bonding method. It owns core advanced benefits as followings:

The Explosion Bonded Clad Plate does not change the chemical compositions and physical states of the original materials.

The Explosion Bonded Clad Plate's combined surface is in a wave structure condition, its binding strength and tensile strength are stronger. Other technology can't reach its effect.

The Explosion Bonded Clad Plate is hard to separate or crack during the hot treatment, leveling, cutting, coiling, flow forming etc.

The Explosion Bonded Clad Plate thickness range is wider: The surface square is 6.45cm²~78.87m², its thickness is usually 1~30mm, and there are no specail limits for the base metal. Its total thickness for the stainless steel clad plate is more than one hundred mm, like clad tube sheets. There is no quantity limit.

The base metal is a carbon steel, cladding materials are other precious metals which can be two layers or more.

The explosive welding can make incompatible metals welded.

so the explosion clad plate is advanced on its performances, especially anti-corrosion and wear resistance.

b. Explosion bonding is also called explosion welding that refers to a welding method which uses the shock wave to drive the metal movement, collide on the surface of the two metals, form a jet, remove the surface mask, and form a metallurgical connection under the action of the shock wave under the high pressure. The high energy rate processing technology released by the gunpowder explosion is used to realize the solid phase welding method.

Special Properties of Explosion Bonded Clad Plate

In addition, explosion bonded clad plate owns special properties. For example, It can absorb shock wave and explosive energy to some extent and convert it into heat or mechanical energy, which makes it widely used in areas such as protective equipment and vehicles. The combination of aluminum and steel, the combination of titanium and steel are difficult to weld by conventional methods, even if special measures are taken, its welding quality is difficult to guarantee. But explosive bonding method is nicer for their combination.

The explosion welding method was proposed in the 1940s. More than a decade later, the explosion welding technology has been introduced into the industrial engineering.

As one of clad plate suppliers, we will do our best to meet all the needs of customers.