ELECTRODEIONIZATION (EDI)
0486
Give your opinion
Read all reviews
Add to notepad
Print
  • 1.9/5
  • 1
  • 2
  • 3
  • 4
  • 5
Details
China Stock lots

Report abuse

Stock lots

ELECTRODEIONIZATION (EDI)

EDI is a pure water manufacturing technology that combines ion exchange technology, ion exchange membrane technology and ion electromigration technology. It skillfully combines electrodialysis and ion exchange technology, uses high voltage of electrodes at both ends to move charged ions in water, and cooperates with ion exchange resin and selective resin membrane to accelerate the removal of ions, so as to achieve the purpose of water purification. During EDI desalination, ions are removed by ion exchange membrane under the action of electric field. At the same time, water molecules generate hydrogen ions and hydroxide ions under the action of electric field, which continuously regenerate the ion exchange resin to keep the ion exchange resin in the best state.

Technical Data of Electrodeionization Unit, Electrodeionization System

Item

Reference value

Nominal Recovery:

90–95%

EDI Water Quality:

15–18 MΩ.CM(25℃)

FEED CONDUCTIVITY (INCLUDING CO2):

< 10 µs/cm(25℃)

Operating Temperature:

50–100° F

Maximum Inlet Pressure:

100 psig

Minimum Inlet Pressure:

60 psig

Expected Pressure Drop:

30–40 psig

Electrical Requirement:

380 VAC, 3-phase, 50 Hz.

OPERATING PRINCIPLES OF ELECTRODEIONIZATIO

EDI desalination process is to exchange ions in water with hydroxide ions or hydrogen ions in ion exchange resin, and then migrate these ions into concentrated water;

The above exchange reaction takes place in the freshwater chamber of the module. In the freshwater chamber, the hydroxide ion in the anion exchange resin exchanges with the anion in the water, and the hydrogen ion in the cation exchange resin exchanges with the cation in the water;

The exchanged ions migrate along the surface of the resin ball under the effect of the DC electric field and enter the concentrated water chamber through the ion exchange membrane;

The negatively charged anions are attracted by the anode, and these ions enter the adjacent concentrated water chamber through the anion membrane, while the adjacent cation membrane membrane does not allow them to pass through. These ions are blocked in the concentrated water, while the positively charged cations are attracted by the anion anion, and these ions enter the adjacent concentrated water chamber through the cation membrane, while the adjacent anion membrane does not allow them to pass through. These ions are blocked in the concentrated water.

In concentrated water, ions from both directions maintain electric neutrality. At the same time, the amount of current is proportional to the amount of ion migration. The amount of current consists of two parts, one part from the migration of removed ions, and the other part from the migration of water itself ionized into H+and OH - ions;

When the water flow passes through the fresh water chamber and the concentrated water chamber, the ions gradually enter the adjacent concentrated water chamber from the fresh water chamber and are carried out of the EDI module by the concentrated water;

Under the action of higher voltage gradient, water will generate a large amount of H+and OH- through electrolysis. These generated H+and OH- will continuously regenerate the ion exchange resin. Therefore, the ion exchange resin in EDI module does not need chemical regeneration;

The above is the desalination process of EDI.

Now the price of EDI water purification system is reasonable, if you have needs to buy electrodeionization EDI system, please contact us.

Pharmaceutical purified water systems adopt the latest processes such as reverse osmosis and EDI. Purified water system pharmaceutical designs a complete set of purified water process in a targeted manner. The quality of purified water for pharmaceutical manufacturing meets the requirements of the current USP, EP, JP and ChP for purified water.

Location : Room 4423, building 01, No. 88, Zhujiang Road, Xuanwu District, Nanjing, 210008 Nanjing,
Contact : .com biocell, 025 83192994

biocell

  • 2.8/5
Retail
Registered since 28 February 2023

Website : www.biocell-pharma.com/

Send email to biocell

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
ELECTRODEIONIZATION (EDI)

Search in a category : Stock lots
Search in a category :
electrodeionization
  • 3.7/5
  • 1
  • 2
  • 3
  • 4
  • 5
Taiwan 334 Equipment goods

Report abuse

Automatic Gear Pump Liquid Filling Machine FP-465
Automatic Gear Pump Liquid Filling Machine FP-465

Tuesday, March 17, 2026

Automatic Gear Pump Liquid Filling Machine FP-465 is designed and engineered to produce outstanding quality and precision filling suitable for various products like shampoo, hot sauce, lubricant oil etc. FP-465 can also replace piston or peristaltic module for the flexibility of filling demands...

Autopack Co.,Ltd

  • autopacker
  • 33454 - Taoyuan City
  • +88 6 33 68 98 06
  • 2.2/5
  • 1
  • 2
  • 3
  • 4
  • 5
France 59590 B2B Services

Report abuse

DIN BELLOWS GLOBE VALVE
DIN BELLOWS GLOBE VALVE

Wednesday, September 14, 2016

Quantity : 5000 - Price : 50,00 €

Bellows Seal Stop Valves(Straight-Through Type) DIN Bellows Seal Stop Valve DIN Bellows Globe Valve DIN Faltenbalgventil Durchgangsform DIN Válvulas de fuelle DIN ventil uzavírací s vlnovcem přímý DIN Standard seteventil med belg (Rett løp modell) DIN Standardında Metal Körüklü...

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935
  • 3.6/5
  • 1
  • 2
  • 3
  • 4
  • 5
Turkey 34000 Construction goods

Report abuse

Ciment turc de qualité
Ciment turc de qualité

Friday, March 07, 2014

Quantity : la tonne - Price : 67 et 63 usd FOB cha

- CEM I 42,5R - Product Portland Cement Standard TS EN 197-1: 2002 Product Definition Portland cement is a product which is obtained as clinker resulting from mixing at suitable rates, grinding and firing raw materials such as limestone, marl, clay, iron ore, pyrite ash, bauxite, etc...

Makendi Worldwide

  • 34000 - istanbul
  • 06 01 05 42 72