Product name: Medical protective mask

Specifications: Stereoscopic 11.5cm × 15cm

Structural composition: The medical protective mask is composed of surface layer, filter layer, inner layer, nose clip and elastic cord, etc. The materials of the surface layer and the inner layer are Spunbond non-woven fabrics, and the materials of the filter layer are meltblown non-woven fabrics and the material of the elastic cord is made of the braided polyester thread and the nose clip is made of the bendable and shapeable metal.

Application: It is applicable for filtering particles in the air and blocking droplets, blood, body fluids and secretions in the medical situation.

Package specification: 1 pieces / bag; 20 bags / box; 36 boxes / box

How to use:

1. Face the side of the mask without the nose clip, and pull the ear straps with both hands so that the nose clip is above the mask.

2. Use the mask against your chin.

3. Pull the earloop behind your ear and adjust the earloop to feel as comfortable as possible.

4. Place the fingers of both hands in the middle of the metal nose clip, while pressing inward, move along the nose clip to both sides, until the nose clip is completely pressed into the bridge of the nose. Using only one hand to pinch the mask nose clip may affect the mask.

Product performance:

1. The mask should cover the wearer's mouth and nose, and should have good facial adhesion. There should be no holes or stains on the surface, and there should be no exhalation valve.

2. Masks should be equipped with nose clips, which should be adjustable.

3. The mask elastic cord should be easy to adjust. It should have sufficient strength to fix the position of the mask. The breaking strength of the connection point between each mask elastic cord and the mask body should not be less than 10 N.

4. The filtering efficiency of masks for non-oily particles should be ≥95%.

Contraindications: Those who are allergic to the ingredients of this product are prohibited.

Warnings:

1. This product is a disposable medical device.

2. The use of damaged packaging is prohibited.

3. The product should be used as soon as possible after opening.

4. This product is recommended to be used for a maximum of 8 hours, please destroy it after use.

5. Please check the tightness when you wear a medical protective mask and enter the work area each time.

6. The mask should be replaced in time after being contaminated by the patient's blood and body fluids and wet.

7. Dispose of the product as medical waste after use.

Storage and transportation conditions: This medical respirator should be stored in a cool, dry, clean, protected from light, non-corrosive gas, and well-ventilated room after use. Transportation should be clean and isolated from fire sources.

HAIDIKE medical protective mask production workshop: