![]() |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Equipment goods
T Series |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
T Series Outdoor |
TO 3.9 |
TO 4.8 |
TO 5.9 |
TO 6.2 |
|
Pixel Pitch(mm) |
3.91mm |
4.81mm |
5.95mm |
6.25mm |
|
Pixel Matrix Per Sq.m |
65536 |
43264 |
28224 |
25600 |
|
Pixel Configuration |
SMD1921 |
SMD2727/1921 |
SMD3535 |
SMD3535 |
|
Brightness (nits) |
≥4000 |
≥4500 |
≥4500 |
≥4000 |
|
Scan |
1/16 |
1/13 |
1/7 |
1/10 |
|
Cabinet Resolution |
128×256 |
104×208 |
84×168 |
80×160 |
|
Power Con. (Max / Avg) |
750/ 230 w/sq.m |
700 / 220 w/sq.m |
700 / 220 w/sq.m |
710/ 210 w/sq.m |
|
Module Dimension |
250x250mm / 0.82x0.82ft |
|||
|
Cabinet Dimension |
500x1000x80mm / 1.64x3.28x0.26ft |
|||
|
Cabinet Weight |
13kg / 28.66Ib (( Die-casting Aluminum) |
|||
|
Service Access |
Front / Rear |
|||
|
Rotation Angle |
-10° and +10° |
|||
|
Refresh Rate (HZ) |
1920 |
|||
|
Grey Scale (bit) |
16 |
|||
|
Viewing Angle (H/V) |
160 / 160 |
|||
|
IP Rate |
IP65 |
|||
|
Input Voltage (AC) |
110 / 240 |
|||
|
T Series Indoor |
TI 2.8 |
TI 2.9 |
TI 3.9 |
TI 4.8 |
TI 5.9 |
TI 6.2 |
|
Pixel Pitch(mm) |
2.84mm |
2.976mm |
3.91mm |
4.81mm |
5.95mm |
6.25mm |
|
Pixel Matrix Per Sq.m |
123904 |
112896 |
65536 |
43264 |
28224 |
25600 |
|
Pixel Configuration |
SMD2121 |
SMD2121 |
SMD2121 |
SMD2121 |
SMD3528 |
SMD3528 |
|
Scan |
1/22 |
1/28 |
1/16 |
1/13 |
1/7 |
1/10 |
|
Cabinet Resolution |
176×352 |
168×336 |
128×256 |
104×208 |
84×168 |
80×160 |
|
Power Con. (Max / Avg) |
800 / 250w/sq.m |
780 / 240w/sq.m |
700 / 220w/sq.m |
680 / 200w/sq.m |
680 / 200w/sq.m |
700 / 210w/sq.m |
|
Module Dimension |
250x250mm / 0.82x0.82ft |
|||||
|
Cabinet Dimension |
500x1000x80mm / 1.64x3.28x0.26ft |
|||||
|
Cabinet Weight |
13kg / 28.66Ib (( Die-casting Aluminum) |
|||||
|
Service Access |
Front / Rear |
|||||
|
Rotation Angle |
-10° and +10° |
|||||
|
Brightness (nits) |
≥1000 |
|||||
|
Refresh Rate (HZ) |
3840 |
|||||
|
Grey Scale (bit) |
16 |
|||||
|
Viewing Angle (H/V) |
160 / 160 |
|||||
|
IP Rate |
IP31 |
|||||
|
Input Voltage (AC) |
110 / 240 |
|||||
* Specifications and photos are subject to change without prior notice.
Full Front Maintenance
LED modules, receiver card, hub card, power supply, cables, etc are all front service.
Curved Installation
Curved with every 2.5° between -10°and 10°, which can make convex and concave.
No light leakage trouble
No light leakage design with specific strips on side of cabinet and behind neighbour module.
Ultra Fast Response
The response speed exceeds the response limit of the naked eyes,
while playing the high speed dynamic images in an LED Screen,
it will have more advantages, there will be no ghosting&twisting and it will perfectly provide the dynamic images.
Wide Viewing Angle
Both 160° from horizontal & vertical for the viewing angle.
Seeing from five directions, it would be still the natural and clear image in an LED display.
We provide advertising+led+screen
Good deal: buying from seller
|
This page is about importers and exporters of T Series Search in a category : Equipment goods Search in a category : series |
Sunday, February 08, 2015
Quantity : 435 - Price : 25 € /pièce
Lot de 435 Robes de soirées, Magnifiques 25 € TTC pièce, Made in Turkey, Rapport qualité/prix imbattable Référence DSCTK-SH435RDS État Nouveau Vendu par 1 lot de 435 articles, des dizaines de modèles différents Articles neufs, modèles 2014, en grande partie sériés 38 au 44 ou 38 au 48 Prix ...
Sunday, September 02, 2007
THE CELLULETTE is the 1° sandal thinness with tests of effectiveness carried out by an approved French laboratory, proving a significant thinning in 28 days of use. Proven slimming and anti cellulite effectiveness The sole of CELLULETTE slope backwards at an angle 8 degrees and the...
Tuesday, February 03, 2026
<< Stable Operations, Continued Growth >> 5 Axis Machining Center-Eumach Co., Ltd. Eumach Co., Ltd. is a fresh business of machine tool industry, and concentrates on manufacturing 5 axis machining center, vertical horizontal machining center, universal milling machine...