Equipment goods
Hammer Union |
Model |
Working Pressure |
Features |
Recommended service |
Fig 100 Hammer Union |
1,000 psi(69 bar) |
u Pressure-tight make-up with hammer |
Manifold and line connections |
u Economical,low-pressure union |
|||
Fig 200 Hammer Union |
2,000 psi(138 bar) |
u Economical,general-purpose union |
General-service manifolds and lines |
u 1-to 4-inch sizes |
|||
u Butt-weld available |
|||
Fig 206 Hammer Union |
2,000 psi(138 bar) |
u O-ring in male sub improves sealing and protects metal-to-metal seal against corrosion |
Manifold and line connections,suction service,and corrosion service |
u Replaceable O-ring extends union |
|||
u 1-to 10-inch sizes |
|||
|
|||
Fig 207 Hammer Union |
2,000 psi(138 bar) |
u Parts are interchangeable with Figs.200 and 206 |
To seal manifold connections and protect union threads |
u O-ring on blanking cap ensures a leak-free seal |
|||
u Raised lugs on cap allow for make-up with a hammer |
|||
u Cap can be tapped for pressure gauge if specified |
|||
u Available in butt-weld |
|||
|
|||
Fig 211 Hammer Union |
2,000 psi(138 bar) |
u Laminated insulating rings eliminate all metal-to-metal contact;insulating rings |
For production systems with electrolytic corrosion problems |
u provide 35 million ohms resistance across the union |
|||
u O-ring in male sub provides a positive primary seal |
|||
u Seal ring in female sub provides a positive secondary seal |
|||
u Insulating rings,O-ring,and seal ring can be replaced to extend union life |
|||
|
|||
Fig 400 Hammer Union |
4,000psi(276 bar)through 4-inch sizes; |
u 21/2-through 12-inch sizes have O-rings for primary seal |
Manifold and line connections,pump suction,and mud service |
2,500psi(172 bar)through 5 to 12-inch sizes |
u Butt-weld available |
||
|
u Available for sour gas service: 2,500 psi suction,(172 bar)cold working pressure, 5-through 12-inch sizes;4,000psi (276 bar) coldworking pressure, 1-through 4-inch sizes |
||
|
|
||
Fig 600 Hammer Union |
6,000psi(414 bar) |
u Bronze seat provides primary seal;will not rust in water services |
Steam service,boiler connections, manifold,and line connections for production,drilling,and well servicing |
Fig 602 Hammer Union |
6,000psi(414 bar) |
u Compact |
Manifold and line connections and mud service |
u Replaceable,lip-type seal provides primary seal,protects secondary metal-to-metal seal,and minimizes flow turbulence |
|||
u Butt-weld available |
|||
u Available for sour gas service: 6,000 psi (414 bar)cold working pressure |
|||
|
|||
Fig 1002 Hammer Union |
10,000psi(690 bar)through 4-inch sizes; 7,500 psi(517bar),5-and 6-inch sizes |
u Replaceable,lip-type seal provides primary seal,protects secondary metal-to-metal,and minimizes flow turbulence |
Cementing,fracturing,acidizing,testing, and choke-and-kill lines |
u Butt-weld available |
|||
u Available for sour gas service: 7,500 psi (517 bar)cold working pressure |
|||
u 5-and 6-inch sizes have O-rings for primary seals |
|||
|
|||
Fig 1003 Hammer Union |
Misaligning union |
u Ball seat provides positive seal with up to 71/2misalignment;2-inch model up to 4° |
For high-pressure connections where lines cannot be aligned |
10,000 psi(690 bar)2-and 3-inch sizes; |
u Replacement O-ring on male sub provides primary seal,and protects metal-to-metal seal against abrasion and corrosion |
||
7,500psi(517 bar),4and5 inch sizes |
u Hammer union connection: available with threaded or butt-weld ends |
||
|
|
||
Fig 1502 Hammer Union |
15,000 psi(1034 bar) |
u Replaceable,lip-type seal provides primary seal,protects secondary metal-to-metal seal,and minimizes flow turbulence |
Cementing,fracturing,acidizing,testing, and choke-and-kill lines |
u Butt-weld available |
|||
u Available for sour gas service: 10,000 psi (690 bar)cold working pressure;butt- weld or non pressure-thread seal configurations only |
|||
|
|||
Fig 2002 Hammer Union |
20,000 psi(1380 bar) |
u Replaceable,lip-type seal provides primary seal,protects secondary metal-to-metal seal,and minimizes flow turbulence |
Cementing,fracturing,acidizing,testing, and choke-and-kill lines |
u 2 and 3-inch line sizes |
|||
u Butt-weld configurations only |
|||
|
|||
Fig 2202 Hammer Union |
15,000 psi(1034 bar) |
u Meets National Association of Corrosion Engineers Standard MR-01-75 and American Petroleum Institute RP-14E |
Especially designed for sour gas service |
u Heat-treated components are 100% tested for hardness |
|||
u Fluoroelastomer seal rings |
|||
u Butt-weld only |
|||
u Stamped"sour gas"using low-stress dot stamping and painted with a green zinc-chromate primer to assure quick identification |
|||
|
Good deal: buying from seller
This page is about importers and exporters of Hammer Union Search in a category : Equipment goods Search in a category : union, hammer |
Saturday, June 13, 2015
Quantity : 100 - Price : US$7.65
fibres de céramique caractéristiques des produits: haute résistance faible retrait faible conductivité thermique et le stockage de chaleur excellente isolation thermique excellente stabilité chimique la résilience aux chocs thermiques bonne absorption acoustique http://www...
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Bellows Seal Stop Valves(Straight-Through Type) DIN Bellows Seal Stop Valve DIN Bellows Globe Valve DIN Faltenbalgventil Durchgangsform DIN Válvulas de fuelle DIN ventil uzavírací s vlnovcem přímý DIN Standard seteventil med belg (Rett løp modell) DIN Standardında Metal Körüklü...
Friday, December 04, 2015
Quantity : 25T/40"
Our cooperative is authorized for export by the Regulatory Board, stabilization and development of the Ivorian Cocoa-coffee sector. As such we mainly sell ordinary cocoa beans certified by UTZ RA or minimum quantity of 25 tonnes / Container40 ', other products are available (Café)...