Wire Stripping Machine
0684
Give your opinion
Read all reviews
Add to notepad
Print
  • 3.3/5
  • 1
  • 2
  • 3
  • 4
  • 5
Details
China Equipment goods

Report abuse

Equipment goods

Wire Stripping Machine

Common failures and methods of wire stripping machine.


1. The length of front wire is different.
A. If the clearance is too large for the left transmission line, adjust the left clearance.
B. The straightener is pressed too tightly. Adjust the straightener adjustment knob.
C. The catheter is not aimed at the center of the knife, and it will adjust the catheter to the center of the blade.

2. The length of the back wire is different.
There is too much clearance for the right transmission line. Adjust the right clearance adjustment disc to the right clearance.

3. The total length is inconsistent with the actual setting parameters.
A. It is longer than the set length, which is due to the systematic error in the mechanical transmission, you need to reduce the value of "L" in the mode.
B. It is shorter than the set length. Because the gap and pressure adjustment between the two wheels of the left transmission line is not suitable, and the value of "L" should be increased in the mode.
C. The length is not consistent because of the failure of the straightener to send the line. It is necessary to adjust the pressure of the right transmission line to the suitable clearance, keep the straightener sent smoothly.

4. The front-end incision is inclined.
It is due to the improper positioning of the catheter. Align the tube with the center of the knife edge.

5. The line head is stripped out of normal while the line end is normal. Some of the incisions are inclined, some of the line cores are cut.
Because the position of the tube is too close to the blade. Adjust the position of the tube, so that the distance between the front end of the tube and the blade is greater than the distance from the line tail (A).

6. The front or the back is cut off in the same bundle line.
Because the edge of the blade is too blocked by too much wire skin and clean it with a brush.

7. The insulation skin is overlaid.
Because there is the excessive pressure on the left and right transmission line. Reduce the left and right pressure wheel.

8. Stripping or stripping in the middle, the length L is qualified, but the size of A.B does not meet the requirements of setting.
A. The wire quality is not qualified, the insulation layer is too loose to the core wire, and the qualified conductor can be replaced.
B. The insulation layer is too soft which is pushed to deformation in machining molting process. The prototype cannot be recovered by external. It is the processing method itself that has the inherent defect. Thus reduce the requirements on the accuracy of length.

Location : 11th Floor, JingZuan Building, No 875,XIAOLIN ROAD,KUNSHAN CITY, 215316 Jiangsu,
Contact : Lee Salome, 0086 0512 57169166

easysight

  • 3.5/5
Retail
Registered since 17 April 2018

Website : www.bojin.hk/

Send email to easysight

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Wire Stripping Machine

Search in a category : Equipment goods
Search in a category :
machine, stripping, wire
GOLD ad
  • 3.5/5
  • 1
  • 2
  • 3
  • 4
  • 5
France 22440 B2B Services

Report abuse

ACTION RETURN PALLETS – WHOLESALE B2B CLEARANCE OFFER
Verified
ACTION RETURN PALLETS – WHOLESALE B2B CLEARANCE OFFER

Monday, February 09, 2026

Action return pallets for wholesalers, professional clearance and European expor

Quantity : 30000 - Price : 0,50 €

We offer return pallets exclusively composed of products sourced from the Action retail chain, intended for wholesalers, clearance professionals, resellers, and exporters. These liquidation pallets contain non-food fast-moving consumer goods, carefully selected for their high resale potential and quick turnover. Offer details: - Return pallets from large retail distribution – Action brand - Approx. 1,000 items per pallet (80% of pallets) - Average price: around €0.50 per item...

TRANSIDI

  • 22440 - PLOUFRAGAN
  • 09 72 63 03 26
  • 33(0)603670505
  • 2.9/5
  • 1
  • 2
  • 3
  • 4
  • 5
Romania 437.080 Raw materials

Report abuse

100% Premium Wood Pellets with Din Plus Certification
100% Premium Wood Pellets with Din Plus Certification

Thursday, December 17, 2015

Quantity : 5000 tons - Price : 90EUR

We are direct manufacturer and main supplier of European standard Wood Pellet 6mm, 8mm with Moisture content: <7% and Calorific value: <4.7kWh/kg.<br /> SPECIFICATION FOR WOOD PELLETS: 1. Application: House Heating 2. Made From: Compacted Sawdust 3. Shape: Stick 4...

ECO ENERG LEMN SA

  • 437.080 - Maramures
  • 262370937
  • 3.9/5
  • 1
  • 2
  • 3
  • 4
  • 5
Turkey 06370 Food

Report abuse

Cube sugar machine
Cube sugar machine

Sunday, March 15, 2015

TAYSAN MAKINA CO. SARL. Is a company that makes the production of types R fullyautomatic and manual machines for making hard sugar cubed Turkey and alsomachines to various food packaging and sugar cubes since ten years experience. With its quality and his professional crew gives...

Taysan Makina Ltd

  • taysanmakina
  • 06370 - Ankara
  • 0090 312 396 01 09
  • 0090 546 610 06 05