3. CHARACTERISTICS
Small size and light weight.
Low-noise ,low vibration.
Good anti-corrosiveness.
Good air tightness
Small starting torque.
Strong resistance against swing, vibration and impact.
4. STRUCTURE TYPE
The ventilator is designed and manufactured into a horizontal structure type or a vertical one, which the vane wheel is mounted directly on the motor shaft extension.
The vane wheel, being riveting structure is made of aluminum alloy and carefully balanced by static and dynamic ways.
Both the machine casing and the inlet are made of welded common steel .
The ventilator can be made for left or right rotation:
Left rotation-viewed from the motor side, the vane wheel rotates clock-wise and indicated as “L”.
Right rotation-viewed from the motor side, the vane wheel rotates clockwise and indicated as “R”.
The outlet position of ventilator, according to the rotating direction of vane wheel, is made into the following main types. In conformity with the requirement, the outlet position is allowed to use other types, the step angle of which is 30°or 22.5°.
The ventilator can be matched with marine AC motor of 380V.50HZ or marine motor DC 220V.
5. Introduction for ordering
5.1 Please introduce the model, flow prate, pressure, speed and structure of fan、50HZ or 60HZ..
5.2 Please offer insulation class and protection class for fan motor (if not, the insulation class is B, protection class is IP44).
5.3 Our factory can offer the fans of special specification and usage according to the user's demands.
5.4 We are responsible for the repair, exchange and return of the products Within 18 months.
6. Use and maintenance
6.1 Before installing the fans, should check whether each part is intact, whether the components are complete, whether the impeller and casing rotating direct are concordant.
6.2 The air enter the fan from axial direction and come out through the impeller. It can be used for left or right rotation.
6.3 When installing the duct of the inlet and should make the duct and fans be spontaneous
outlet, identical, not join them forcing, not bring the weight of duct on the fans.
6.4 After installed the fans, check whether there is friction of collide between the impeller and the fixed parts by rotating the impeller. If collision, friction, loud noise or strong vibration happened, the fan should be restart after checking. Avoid the fan being bumped and other substance or liquid entered the fans. Please clean the dust on blade of impeller in time, so as not to break the balance and
strengthen the noise.
6.5 The fans should be start-up without load.
Location : NO.8~18 XITAI INDUSTRIAL PARK, 266000 LAOSHAN,
Contact : Steven Jones, 8653288078520