What materiasl do we need when do conveyor belt pulley lagging ?
Details
China Equipment goods
Equipment goods

What materiasl do we need when do conveyor belt pulley lagging ?

Quantity : 1   Price : usd 1


what materiasl do we need when do conveyor belt pulley lagging ?




What materials do we need when make conveyor belt pulley lagging ? Now most of the pulley lagging is done by cold vulcanizing way .


In terms of materials for pulley lagging , firstly we will think of cold vulanizing glue.


Ramimtech sk313 is one type ideal glue for pulley lagging . It will have vulcanizing action with CN bonding layer of pulley lagging rubber sheet ,


which will make rubber sheet be fused on the drum, and they two become one.so the rubber sheet won't easily becoming unglued.


The curing speed of sk313 is severial times of common glue .Its temperature range is -40℃-120℃,can be used in extreme environment.


And it is with perporty of flame resistance.These are the main reasons of many companies choose this glue.



Cleaning solution is used before brushing glue for get a deeper clean on surface of drum,so that there will be a better bonding between drum and rubber sheet .


Metal primer also named metal treatment , it have no bonding proterty itself, mainly used as transition between drum and rubber sheet , and exponentially increase bonding effect


between them .


As for pulley lagging rubber sheet, there are three type: wear-resistant rubber sheet , diamond type and caramic type .


Wear resistant rubber sheet is both wear-resistant and impact-resistant, is suitable for drive drum coating in middle or high tension conveyor belt system.


Diamond rubber sheet is with diamond pattern on the surface, which will increase the coefficient of sliding friction, reduce the slippage between the drum and conveyor belt,


and is suitable for drive drum coating in fabric conveyor belt system and middle or low tension steel cord conveyor belt system.


Caramic rubber sheet is with Al2O3 ceramic square embedded on the rubber surface, which is with is best wear-resistant, and can protect conveyor belt well.


It is suitable for high strength and high tension conveyor system,and for extreme bad environment.


Because the diamond rubber sheet is more wear-resistant than plate type, can prevent slippery, and its price is much lower than ceramic type,


it became the first choice of pulley lagging in most enterprises.


12mm diamond wear resistance rubber sheet is with CN bonding layer on the side bonded to drum. With the bonding effect of cold vulcanizing glue SK313,rubber sheet will be bond to drum firmly.


and we needn't worry about tackless etc.

Location : No.1 Shangdu Road, 450000 Zhengzhou,
Contact : Brant Gao, 86 371 63486729

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
What materiasl do we need when do conveyor belt pulley lagging ?

Search in a category : Equipment goods
Search in a category :
conveyor, belt, pulley, lagging, materiasl
Hong Kong 86 Electronics / Computers
Global Selling Samsung High Full Capacity 18650 2900mAh Li-ion Battery 29e for Bluetoot...

Wednesday, November 30, 2016

Quantity : 1000pcs - Price : USD$2.3

No. Item Parameter&tech spec Remarks 1 Nominal Capacity 2900 MAh Standard charging&discharging 2 Rating Voltage 3.70V 3 End of charging Voltage ≤60mΩ 4 End of charging current 4.20±0.02V 5 End of charging current 0.02 C5A 6 End of Discharge current 3.0V 7...

Shenzhen Believe Technology Co.,Ltd

  • 86 - BaoAn District
  • 008613590311520
France 200030 B2B Services
Preventive Maintenance Software

Wednesday, May 22, 2024

Preventive maintenance is a very important part of equipment life cycle management. Using EAMic® preventive maintenance management software, maintenance team can always arrange the preventive maintenance work in advance, your assets will always receive the required maintenance care...

  • 200030 - shanghai
  • 021 6958 0696
Czech (Rep.) 528400 Second hand goods
BOSOKO OEM Windshield Wiper Blades

Saturday, May 25, 2024

BOSOKO OEM Windshield Wiper Blades Bosoko custom windshield wiper blades are a great choice for any car owner looking for a long-lasting, reliable, and efficient car cleaning wiper and rain windshield wipers. Bosoko OEM windshield wiper blades are designed to provide maximum performance...

Xiamen Dengding International Trade CO., Ltd.

  • 361100 - fujian
  • 020 8624 4308