L0730 Drainage Duct Rodder
Details
China Construction goods
Construction goods

L0730 Drainage Duct Rodder


Method of use: First, reasonable arrangement good direction of the wire line pipe, elbow is best use of pipe bender bending, fixed line pipe. Secondly, the threader either side across the line pipe, tube at the other end pull out a short online, then, will need to enter the line pipe lines each thread cut to about 5 cm, take a piece of bare wire into the threader head small hole circle fold and firm, with several lines need to enter the same line pipe, and ground them in together, wrapped with tape from the line pipe slowly in the past, the most, on the other end pull the threader. Note: when you pull hard, need to tap the line pipe.

Location : bazhou hebei China, 065700 bazhou,
Contact : Yang Jie, 86 0316 7399000

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
L0730 Drainage Duct Rodder

Search in a category : Construction goods
Search in a category :
drainage, duct, rodder, l0730
Taiwan 330 Electronics / Computers
Cold forging loud-Speakers part: Top Plate and Pole Plate

Wednesday, October 21, 2020

Shining Jins specializing in manufacturing & designing cold forge Pole piece (T-Yoke) for Loud-Speakers and alarms raw driver in Taiwan. Areas of Application: Home audio loudspeakers driver Neodymium Sub-Woofer dirver P.A. loudspeakers driver Car loudspeakers driver Neodymium...

Shining Jins Enterprise Co., Ltd.

  • jsicyoke
  • 330 - Taoyuan City
  • +88 6 33 61 06 38
Taiwan 330 Everything else / Bulk
Customized cold forged and turned fasteners and bolts made in Taiwan

Wednesday, October 21, 2020

Shining Jins Enterprise Co., Ltd. supplies a wide variety of precision, high quality cold forged and machined parts to the automotive industry. Using the latest in forging technology, we currently have the capacity to produce more than ten million cold forged parts per year. To provide...

Shining Jins Enterprise Co., Ltd.

  • jsicyoke
  • 330 - Taoyuan City
  • +88 6 33 61 06 38
France 518106 Feasts items
CNC Machining Brass

Thursday, April 27, 2023

Brass is an object made of an alloy of copper and zinc. The melting point of brass with a copper content of 56%~68% is 934~967 degrees. Brass has excellent mechanical properties and abrasion resistance. So brass is a good material for manufacturing custom brass cnc machining parts...

YS RAPID MANUFACTURING LIMITED

  • ysrapid
  • 518106 - shenzhen
  • 8615817251032