B2B Services
CHINA SINGULAR Composite Insulating Foam Cement Panel
|
Item |
Unit |
Performance index |
Test method |
|
Type Ⅰ |
Type II |
|||
Dry density |
Kg/㎡ |
≤300 |
≤250 |
GB/T 5486 |
Heat conductivity coefficient |
W/(m•k) |
≤0.08 |
≤0.06 |
GB/T 10294 |
Compressive strength |
MPa |
≥0.50 |
≥0.40 |
GB/T 5486 |
Tensile strength |
MPa |
≥0.13 |
≥0.13 |
JGJ144 |
Water absorption (V/V) |
% |
≤10.0 |
≤10.0 |
Appendix A |
Drying shrinkage value |
mm/m |
≤0.80 |
≤0.80 |
GB/T11969 rapid method |
Carbonization coefficient |
- |
≥0.80 |
≥0.80 |
GB/T 11969 |
Softening coefficient |
- |
≥0.80 |
≥0.80 |
JGJ51 |
V. External heat insulation system construction of external wall:
Facing materials |
Heat insulation system structure |
Structure diagram |
||||||
①Base course |
②Interface layer |
③Leveling course |
④Tack coat |
⑤Heat insulation layer |
⑥Plastering coat |
⑦Facing layer |
|
|
Coating |
Concrete wall and various masonry wall |
Mortar interface (use required by the design) |
Waterproof mortar (use required by the design) |
Adhesive mortar |
Foaming cement panel |
Plastering mortar + net cloth + anchoring part |
Flexible water-resistant putty + coating |
VI. Precautions:
1. Before paving the panel, you should clear the surface dust.
2. The paving of the panel should start from the first floor, and the level line should pop up from the position 300mm away from the plinth ground from the bottom to top to pave it horizontally and transversely. The staggered joints between panels of upper and lower rows should be 1/2 the panel length.
3. The paste between the panel and the basic wall should be with no space left. An iron float should be used to coat every panel with a layer of over 3mm adhesive mortar evenly when pasting, and the pasting area should be more than 95%. You should paste and press the mortar to the base timely and to make sure that the gap of joint between panels should be no large than 1mm.
4. When composite foaming cement panel is in the corner of wall, you should pre-arrange the dimension and cut it to a proper size and vertically connect them in cross shape to ensure its perpendicularity with the corner.
5. When pasting the external corners around the window frame and the outer corners of wall, you should stretch out the vertical baseline to ensure the perpendicularity of the external corners. And the foaming cement panels to be pasted to the door and window edges should be cut into “L” shape and no split joint should be allowed. The gap between joints and window edges should be no less than 100mm.
Good deal: buying from seller
This page is about importers and exporters of CHINA SINGULAR Composite Insulating Foam Cement Panel Search in a category : B2B Services Search in a category : foam, composite, china, panel, insulating, cement, singular |
Thursday, September 14, 2017
Quantity : 20 PCS - Price : USD 888/PC
SCHNEIDER TSXMRPC007M Contact person: Miss Veronica WhatsApp: 86 18106957056 Phone: 008618106957056 Skype: 8618106957056 QQ: 2206305349 Wechat: nseauto006 N.S.E.Automation is a leading global industrial supplier in China, specializing in automation control systems module and...
Thursday, July 27, 2023
Quantity : 1000000
Zhangxiaoquan is a company specializing in creating & designing modern kitchenware products. With high quality products and good prestige set up a Kitchen Utensils & Tools famous brand. We offer full series of kitchen utensils like kitchen shears & scissors, cooking utensils...
Thursday, September 14, 2017
Quantity : 20 PCS - Price : USD 888/PC
SCHNEIDERBMKC8020300 Contact person: Miss Veronica WhatsApp: 86 18106957056 Phone: 008618106957056 E-mail: veronica@nseauto.com Skype: 8618106957056 QQ: 2206305349 Wechat: nseauto006 N.S.E.Automation is a leading global industrial supplier in China, specializing in automation...