CA Series-330CA30 PEEK Carbon Fiber Reinforcement

Quantity : 1000Kgs Price : 400-800CNY

CA Series-330CA30 PEEK FC, CF PEEK carbon fiber reinforcement is suitable for the production of bushing seals and other products, can be faster from the bearing surface heat dissipation, at the same time has a high thermal deformation temperature (336 ° C) , also can maintain strength at high temperature, to a certain extent, can replace metal materials.

Specification of CA Series-330CA30 Polyetheretherketone Carbon Fiber Reinforcement

Material Properties	Test Method	Conditions	Units	770G
Mechanical Data
Tensile Strength	ISO 527	B reak,23℃	MPa	-
Tensile Strength	ISO 527	Y ield,23℃	MPa	100
Tensile Elogation	ISO 527	Break,23℃	%	45
Flexural Strength	ISO 178	Break,23℃	MPa	-
Flexural Strength	ISO 178	Y ield,23℃	MPa	165
Fleoural Modulus	ISO 178	23℃	Gpa	4.1
Compressive Strength	ISO 604	23℃	MPa	125
Charpy Impact Strength	ISO 179/leA	Notched	kJm-2	7
Charpy Impact Strength	ISO 179/IU	Unnotched	kJm-2	-
Izod Impact Strength	ISO 180/A	Notched	kJm-2	7.5
Izod Impact Strength	ISO 180/U	Unnotched	kJm-2	-
Mould Shrinkage	ISO 294-4	Along flow	%	1
Mould Shrinkage	ISO 294-4	Across flow	%	1.3
Thermal Data
Melting Point	ISO 11357		℃	343
Glass Tansition (Tg)	ISO 11357	Onset	℃	143
Special Heat Capacity	DSC	23℃	kj kg-1℃-1	2.2
Coefficient of Thermal Expansion	ISO 11359	Along flow below Tg	ppm K-1	45
Coefficient of Thermal Expansion	ISO 11359	Along flow above Tg	ppm K-1	120
Heat Deflecion Temperature	ISO 75A-f	1.8Mpa	℃	152
Thermal Conductivity	ASTM C177	23℃	W m-1K-1	0.29
Flow
MeltIndex	ISO 1133	380℃,5kg	g10min-1	10
Miscellaneous
Density	ISO 1186	Crystalline	gcm-3	1.3
Density	ISO 1186	Amorphous	gcm-3	1.26
Shore D Hardness	ISO 868	23℃		85
Water Absorption(3.2mm thick Tensile Bar)	ISO 62-1	24h,23℃	%	0.07
by immersion		Equilib riu m,23℃	%	0.4
Electrical Data
Dielectric Strength	IEC 60243-1	2mm	kV mm-1	23
Comparative Tracking Index	IEC 60112		V	150
Dielectric Constant	IEC 60250	23℃,1kHz		3.1
Dielectric Constant	IEC 60250	23℃,50kHz		3
Loss Tangent	IEC 60250	23℃,1MHz		0.004
Volume Resistivity	IEC 60093	23℃,1V	Ω cm	10 16
Volume Resistivity	IEC 60093	275℃	Ω cm	10 9

As one of peek suppliers, we will do our best to meet all the needs of customers.

Location : No.1177, Zhongyan Road,Luyuan Economic Development Zone,Changchun, Jilin,Province ,China 130113, 130113 Changchun,
Contact : com zhongyanpeek, (0431)89625588

zhongyanpeek

2.9/5

Retail

Registered since 18 October 2022

Website : www.zhongyanpeek.com/

Send email to zhongyanpeek

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.

This page is about importers and exporters of
CA Series-330CA30 PEEK Carbon Fiber Reinforcement

Search in a category : Raw materials
Search in a category :
fiber, series, peek, carbon, 330ca30, reinforcement

3.2/5
1
2
3
4
5

Hong Kong

852 Equipment goods

IP Camera Module | TI solution 2.0megapixel 1080P DM365/DM368+Sony IMX222

Monday, September 07, 2015

- Feature (click here for details) - - Under the LAN can support more than 10 simultaneous client connections cameras, image lag within 100 milliseconds, supports standard streaming media network protocols, network 8 M per channel bit rate case, no mosaic - The DSP processor...

ZT Technology Group Ltd.

ellazhan
852 - Fo Tan
+85 2 26 75 75 58

3.7/5
1
2
3
4
5

Taiwan

24158 Equipment goods

PNC (ZNC+table movement auto-positioning) EDM Series K50,K60,K90

Thursday, August 06, 2015

Quantity : 30

The X. Y& Z axis utilize AC servo motor. Auto-positioning and multi cavities machining. Program function The Circle Angle of Sparking is lower than 0.02mm The best surface roughness (Ra) is better than 0.1 µm. High speed and long distance jumping. Special Rib shape machining function...

Sane Kuei Machinery Co., Ltd

Sane Kuei Machinery Co., Ltd
24158 - New Taipei City
+886285112370

3.7/5
1
2
3
4
5

France

529000 Equipment goods

3W LED Panel Lights

Tuesday, July 22, 2014

We specialized in High luminous efficiency LED Ceiling Panel Light low power, it is adopt unique optical design, isolated constant current driver. It is used to replace traditional grille lights and is superior than the other similar panel lights . Reel Green LED panel light RL...

Real Green lighting Company

Bonny Chan
529000 - Jiangmen City
+15 6 02 20 39 93