Felt Disc Flat Type

felt disc flat type

Flat type steel wool polish chrome is specially designed for mirror finishing & polishing requirements.

It's different like normal flap discs and the disc's density can be 2.0g/cm3 to 8.0g/cm3 which provide cooler & flexible polishing performance.

Felt polishing flap disc can be used to eliminate scratches and brighten the surface. It can also be used as one of the combined polishing wheels to eliminate scratches on shallow surfaces. It can be used with polishing powder coolant.

Features of Felt Disc Flat Type

Felt materials can make of different densities, thicknesses, and hardness, with fiber-glass backing or plastic backing.

A firmer version is suggested to polish fat components and prepare for finer processing.

The softer version is more suitable for more gloss and shining surfaces.

Three different shapes allow the felt discs to apply to complicated geometries.

Felt Disc Flat Type Applicable Industries

Applicable Industries

Polishing and mirror finishing

Marble polishing

Hardware work piece mirror polishing

Cleaning the surface of non-ferrous metal

Polish in the last step of the process, cleanliness can achieve mirror effect.

Recommendations for Use

For best performance, use with a recommended cutting speed of 5–10 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the work piece and tool wear.

Felt points and discs:

Use diamond polishing pastes and polishing paste bars.

Use polishing and grinding pastes.

When changing the polishing paste, use a brand-new polishing tool.

Matching Tool Drives

Angle grinder

Cordless angle grinder

Safety Instructions of Felt Disc Flat Type

How To Felt Disc Flat Type

Instructions:

Please try to choose operation indoors environment and wear protective guards and goggles.

Never to exceed the recommanded maximum permitted rotational speed for safety reasons.

In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.

Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

Safety Warning:

The clamping lenght between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.

If you have any questions, please contact us immediately

If you have needs to buy abrasive flap wheel, please contact us.

As an abrasives factory, we can offer kinds of related products for salw, anything you need, please leave us a message.