ELEVATOR OVERSPEED GOVERNOR

The overspeed governor in elevator is the heart of any elevator safety system. Lift overspeed governor is a safety device that is activated when the elevator speed exceeds, ensuring the safety of the passengers inside. According to the different working directions, there are mainly Unidirectional Overspeed Governor and Bidirectional Overspeed Governor.

Working Principle Of Elevator Overspeed Governor

The elevator overspeed governor is of the centrifugal type and is able to work either upwards or downwards. The elevator overspeed governor is fixed directly to the floor in the machine room or in the upper part of the hoistway, joined by the rope to its tension device located in the pit. This tension device is attached to the guide pulley by flanges.

The rope passes through the groove of the governor and the tensing pulley. The ends of the rope are attached to the elevator safety gear. Thus, when the car reaches its tripping speed, the safety gear will interact with over speed governor in lift and stop elevator car.

Elevator Overspeed Governor Maintenance

Inspection Of Each Component Of The Overspeed Governor

Pulleys, switches, brackets are all important components of any safety system. The system will only function as expected when all parts are matched to each other and in proper working order. Each of these components has its own characteristics that must be checked.

Overspeed Governor Wire Rope

The overspeed governor wire rope will be damaged or even broken after a long time of use. Once a problem is found, it needs to be replaced immediately.

Tensioning Device

The overspeed governor is not a separate accessory, it needs to work in coordination with the tensioning device. Therefore, it is also necessary to check the condition of tensioning device.

Panda, as an excellent elevator parts manufacturer, offers a wide range of electric elevator parts for you to choose from.