How to properly repair the dump truck?

How to properly repair the dump truck?

To learn how to drive, you must first learn to repair a dump trailer, but there are many things you should pay attention to when you repair a semi dump trailers. Do you know? Huge safety hazards are often hidden infrequent maintenance work. Today we will briefly list these things.

Welcome to click “Resource“, you can get more article about this article.

Tighten the screws to prevent cruel operation

Many people worry about whether they are installed securely when installing tires or tightening goods, and then stepping on crowbars to reinforce them, but the feet are easy to slip, but tools such as crowbars will rebound and hurt people. Don't push hard, so the chance of a rebound is greater.

Correct method: Use special tools whenever possible to ensure safe operation. Do not use the step tool.

Potential killer of tyre bulging

Tyre bulging is very dangerous, especially on the front wheels. If the tire bursts due to bulging, it may cause an accident and even be more dangerous on the highway. Therefore, if a photoconductor kit is found during inspection, it should be replaced in time.

At the same time, many side tipper trailer drivers often get out of the vehicle when checking tire pressure during driving, and use a crowbar to hit the tire to determine whether the tire pressure is normal. At this time, because the wheel temperature is high, the tire pressure is high, and the crowbar hits the tire. The risk of leaks is high, and the pressure on truck tires is usually high. Once the A tire is greatly impacted, if the tire is inflated, once it is impacted, it is more likely to cause the A tire, and the damage caused is also very common.

Correct method: If you find that the tire is bulging, replace it immediately. Check the tire pressure with a dedicated barometer.

The tractor tipper trailer's cab must be lifted to the designated position

At the same time, during vehicle engine maintenance, it is often necessary to flip the cab up, but remember to lift the cab to the end. Otherwise, the locking device will not be activated and the cab will be subject to other external forces. It may fall, causing great damage to maintenance personnel.
The right way: Check and make sure the cab is lifted into place.

Do you want to get more knowledge and quotations? please contact us!