Silicone Potting - 4313-AB
Details
China B2B Services
B2B Services

Silicone Potting - 4313-AB

Quantity : 2000 tons

FEATURES OF GOLOHO-4313-AB

Flammability,UL-94V0 certification

Excellent resistance to high and low temperature, weather, ultraviolet light and aging, excellent performance of insulation and thermal conductivity

Mix ratio 1: 1, mixed color is W/G, low viscosity, good flowability, long working time, Rapid integrated curing speed, suitable for encapsulation of extensive module.

Superior heat curing feature allows a wide range of area and depth of sealing parts, smooth surface and out from within.

GOLOHO-4313(W)-AB is a 2 part silicone adhesive particularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room or low temperature .

HOW TO USE GOLOHO-4313-AB

Stirred thoroughly before mixing

Mixed in 1: 1 ratio by weight

Agitation: mixed thoroughly by low speed agitation

Foam scrubbing: evacuation for 5 minutes after mixing. Dispose it if a small amount of operation or no critical request of foam.

Encapsulation: pour into the article immediately after agitation and foam scrubbing thoroughly, it can flow flat naturally

Curing 1: curing at room temperature for 2.5 hours. The cure rate is rapidly accelerated with heat

Curing 2: curing by oven. After 30 min standing and foam scrubbing thoroughly and preliminary curing at room temperature, the encapsulant will be cured at 70℃ for 20 minutes

TECHNICAL DATA OF GOLOHO-4313-AB

Model

GOLOHO-4302W (G) -AB

Uncured

A

B

Appearance

White(grey), Flowing

White flowing White, Flowing

g/cm3 Density

1.60±0.1

1.60±0.1

Viscosity cP

4000±500 (25°C)

4000±500 (25°C)

Mix ratio(weight/volume)

1

1

Cured mechanical properties

Working time （25℃）h

1

Cure conditions

Durometer JIS A

50±5

Tensile strength MPa

>1.0

Elongation %

>70

Thermal conductivity W/m·K

0.6~0.8

Flammability

UL94V0

Electrical properties

Volume resistivity Ω﹒cm

>1×1014

Dielectric strength kV/mm

20

OTHER CAUTIONS OF GOLOHO-4313-AB

Curing processing will be prevented if contact with condensed silicone rubber and gas released, N, P, S, heavy metal chemicals

Wear an eye-patch and gloves during operation, keep the environment be ventilated

Packaging: A, 25kg, B, 25kg

Storage: shelf life is 6 months when it stored in cool dry place under the condition of 22℃ and RH<55%. Keep out of the reach of children.</span>

Without notice, the contents of this article may be changed due to the product performance improvement and specification.

We just only ensure the specifications of our products. You have to test the rtv grease before using to conform if it is suitable for your use.

Our products are developed for general industrial use.

Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: 0519-85610389

Location : No.200, Chuangxin 2 Road, Xinbei District, Changzhou, Jiangsu, 213000 changzhou,
Contact : Chen Neil, 0519 85108032

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Silicone Potting - 4313-AB

Search in a category : B2B Services
Search in a category :
silicone, potting
France 528500 Health / Hygiene
Dental Chair manufacturing and trading combo

Sunday, July 12, 2015

Quantity : 1 - Price : 2 000,00 €

Options: 1.imported 4 hole high speed air turbine hand piece 2.imported 4 hole low speed air turbine hand piece 3.Endoscope system 4.Ulerasonic scaler 5.curing light Location : Foshan City , 528500 Foshan , Contact : Nature Mai Mai , +15 0 19 61 17 04

France Skylight International Limited

  • 528500 - Foshan
  • +15 0 19 61 17 04
Belgium 7500 Raw materials
Lots de tissus et acccessoires

Thursday, March 20, 2014

Quantity : 200 et plu - Price : A partir de 0,10 € l

VENTE DE TISSUS – Je suis confectionneur - J'ai des fins de rouleaux de quelques mètres à 45 mètres de tissus pour fabriquer divers produits, dans tous coloris. Liste ci-dessous - Prix Hors-taxes. Si intéréssé me contacter par mail - -- Tissus pour maillots- shorts de sports foot-...

Etsgeldof

France 361002 Second hand goods
3D Print Plastic rapid protoyping maker

Friday, May 16, 2014

Quantity : 500000pcs - Price : $1-25/pc

Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...

Xiamen Karo Co.,Ltd