Z-Wave Door/Window Sensor

Introduction:

Door sensor is an intelligent security equipment that can transmit the Z-wave network which has particular frequency. In the Z-wave network communications, door sensor can be connected to any Z-wave main controller. The door sensor can send messages to the Z-wave main controller, and realize association with other devices through the Z-wave main controller. Different countries or areas, the radio frequency is different. In the communication with the Z-wave main controller, the door sensor can send messages to the Z-wave main controller, but it can not receive messages from the Z-wave main controller. When alarm is triggered, the door sensor sends messages to the Z-wave main controller, the Z-wave main controller will displays the current status of door sensor, so the door sensor can associate with other devices. Door sensor is battery powered, is small and can be installed on the window or door easily. When the door or window is open, the door sensor is triggered and linkage alarm realized.

Parameters

1. Model: COL-DS01Z

2. Compatible with 300 series and 500 series

3. Power: CR2x1

4. Standby current: 1uA

5. Battery life: 2 years

6. Radio Protocol: Z-wave

7. Radio Frequency: 868.4MHz EU; 908.4MHz US; 921.4MHz ANZ; 869.2MHz RU

8. Compatible with 300 series and 500 series

9. Wireless distance: 50m

10. Operation temperature: 0-40℃

11. Storage temperature: 0-60℃

12. Size: Contact sensor main body (L*W*H): 70 x 20 x 20mm

Contact sensor deputy body (L*W*H): 40 x 11 x 11mm

Features

Install on the door or window.

Battery powered.

Easily install with screws or sticker.

Associate with other devices through the gateway.

Compatible with any Z-Wave main controller.