![]() |
|||||||||||||||||||||
|
Raw materials
MJ-2230 silicone for injection mold |
|
Model |
Color |
Viscosity (cps)(After A/B mixed ,mPa.s)
|
Hardness (A°) |
Tensile Strength (Mpa) |
Tear Strength (kN/m) |
Elongation (≥%) |
Mixing ratio |
Pot life (mins, under 25℃)
|
Curing Time |
|
MJ-2230 |
Transparent |
65000-100000 |
30 |
5 |
22 |
300 |
10: 1 |
30-40 |
25℃/24h 80℃/0.5~1h
|
Advantages:
*An exceptional fluidity and good operability, easy to demold
*Good tensile strength and tear strength
*Good flexibility
*Outstanding bubble releasing
*Good duplication times
Good deal: buying from seller
|
This page is about importers and exporters of MJ-2230 silicone for injection mold Search in a category : Raw materials Search in a category : mold, silicone, injection |
Tuesday, November 24, 2015
Quantity : more than
Application The cables are similar in design and application to CW 1308, but with Low Smoke Halogen Free cores and sheath. CW 1600 has the added advantage of an Aluminium/Polyester foil screen and drain wire. A fire barrier tape is included on cable with more than 6 pairs. The cables...
Tuesday, August 11, 2015
Quantity : 500 - Price : $110~130
- Key Specification: - - Color: Various color can be chosed - Input Voltage: 120~240V - Rated Power: 50-60HZ - Power (W): 36~55W - Noise Level: 25~55dB - Display Mode:LED - Control Mode: Touch screen - CADR: 320m³/H - Purifying Rate: 99.7% - Length Of Power Cord: 2.2M standard or...
Tuesday, August 11, 2015
Quantity : 500 - Price : $145~165
- Key Specification - - Color: Various color can be chosed - Input Voltage (V): 120~240V - Rated Power: 50-60HZ - Power (W): 36~55W - Noise Level: 25~55dB - Display Mode:LED - Control Mode:Touch screen - CADR:450m³/H - Purifying Rate:99.7% - Length of Power Cord: 2.2M standard or...