Equipment goods
Insulation And Wind Pressure Tester For External Wall
|
Max head travel: | 104mm |
Head pressure | 9N |
Head dimension round | 16mm |
Counter range | 1~99999 times |
Instrument size | 700*240*340mm |
Weight | 15Kg |
Accessories and consumables:
1. Friction cloth clamping clip
2. Standard friction sandpaper
3. Small white friction cloth (AATCC/ISO standard)
4. Friction small white cloth (SDC)
5. Calibration fabric
6. Grey card (color) -ISO/BS standard
7. Grey card (stained) -AATCC standard
Test Procedure
1. Sample preparation:
1. 1 The sample and standard small white friction cloth need to be moisturized in a constant temperature and humidity environment.
1. 2 When the sample has many colors, all colors should be rubbed.
1. 3 if the area of various colors is large enough,take different colored smaple separately.
1. 4 To make dry friction and wet friction, ensure that all colors are rubbed.
1. 5 If the two sides of the sample are made of different materials and colors, the test will be done on both the two sides.
1. 6 Dry and wet rubbing fastness test should not be repeatedly done in the same part of the sample.
2. Dry friction:
2. 1 Place the sample flat on the tester with sandpaper laid on. Make the lengitudinal direction of the specimen consistent with the moving direction of the instrument and fix the sample on the pressing plate, and the sample should be flat.
2. 2 Apply the standard friction cloth to the friction head, tighten with the spring clamp, and place the friction head on the sample.
2. 3 Ensure that the sample has no slip or wrinkle when the friction starts;
2. 4 Put the friction head on the sample. Connect the POWER and press the POWER button. Set test times.
2. 5 Start the test by pressing the START button. When the test number reaches the set value, the instrument automatically stops.
2. 6 Remove the standard white friction cotton cloth and compare for rating with the gray card.
3. Wet friction:
3. 1 Completely wet the standard friction cloth in distilled water;
3. 2 Squeeze the friction cotton in the filter paper after taking out, but contain certain water content;
3. 3 The remaining steps are the same as the above dry friction test;
4. Result processing:
4. 1 Before rating, use scotch tape to gently stick the loose fluff off the white cloth.
4. 2 Place three layers of unused friction white cloth under the white cloth to be assessed, and the color rating of the small white cloth should be evaluated by reference to the standard stained grey scale.
5. Test report:
5. 1 Report standard method
5. 2 Report dry friction and wet friction results respectively.
Good deal: buying from seller
This page is about importers and exporters of Insulation And Wind Pressure Tester For External Wall Search in a category : Equipment goods Search in a category : pressure, external, wall, insulation, wind, tester |
Friday, December 15, 2017
OEM PART NO DESCRİPİTİON 66072 Crown Wheel and Pinion FOR CARRARO 13X30 66941 Crown Wheel and Pinion 15x37 2277448 CATERPİLLAR AİR FİLTER OUTER 2277449 CATERPİLLAR AİR FİLTER İNNER 01/117901 FAN BELT 01/124403 FAN BELT 01/124404 02/100073 Oil Filter Canister Type, MEDİUM MODEL 02/100284...
Friday, May 10, 2024
Quantity : 660
Item Name RESTAURANT CHAIR/ BANQUET CHAIR. Model No QP-397 Material + Frame: steel. + Backrest & seat: upholstery imitation leather Size Chair: 51x44.8x103 cm Frame Color Stainless steel/ gold/ cream white/ black Leather (cloth) color Any color, pattern...
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Gate Valves (F4 Type) DIN Standard F4 Gate valves / (Length acc.to DIN EN 558-1,face to face series 14 ) DIN F4 Gate valve DIN absperrschieber F4 DIN Válvulas de compuerta DIN F4 šoupátko stavební délka dle DIN EN558-1 serie 14 DIN Standard F4 sluseventil (lengde iht. DIN EN 558-1...)