Fire resistant paint

Paint: 20 kg/bucket

Application:

1.Please do the necessary substrate treatment such as derusting ,dedusting and degreasing, and then apply the anti-corrosive primer paint such as zinc rich primer paint or epoxy mio paint.

2.Make sure the paint is fully mixed before use.

3.Please do not use this product when moisture content RH>90 or T<5℃.</span>

4.No fire or eletric welding work allowed before the coating is hard dry.

5.Diluent rate: 0%-10%.

Technical Data:

Color and appearance of paint film Colors and smooth film

Drying time, drying (150 degrees C), H 1

Adhesion (zoned method), class ≤1

Impact strength, kg, cm ≥50

Flexibility, mm 10

Thickness of dry film, μm 30-60

Hardness (swing rod method) ≥0.4

Covering powder, g/㎡ ≤ 85

Heat resistance Good

Double coating interval time:

Temperature 5℃ 25℃ 40℃

Shortest time 24h 18h 6h

Longest time no limited

Surface treatment:

All surfaces must be clean, dry and free of contamination. Before painting, should be assessed and treated in accordance with standard of the ISO8504: 2000.

Construction condition:

Base temperature is not less than 0℃, and at least above the air dew point temperature 3℃, the relative humidity of 85% (temperature and relative humidity should be measured near the base material), fog, rain, snow, wind and rain is strictly prohibited construction.

Construction method:

Spraying: non air spraying or air spraying. High pressure non gas spraying.

Brush / roll coating: recommended for a small area, but must be in order to achieve the specified dry film thickness.