Pad printing silicone rubber

Description of Pad Printing Silicone Rubber:

1. Pad Printing Silicone Rubber is a double-component silicone rubber, and can be vulcanized in room temperature. Solidify time depends on the mount of curing agent, the more the curing agent, the fas ter the curing.

2. Pad Printing Silicone Rubber is used for surface printing of plastic and hardware products. It ha s good resistance to wearing, no distortion, no leakage and good ink transfer property.

Features of Pad Printing Silicone Rubber:

good printing effect
good quality
good resilience
without impurity

Operation of Pad Printing Silicone Rubber:

Pad Printing Silicone Rubber is two-component silicon, part A is the liquid silicon rubber, part B i s the catalyst. The usual mixing ratio for silicon rubber and catalyst is 100: 2-3, eg. We take 100grams of liquid silicon rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.

Storage, Transportation Pad Printing Silicone Rubber:

1.The products should be deposited in a clean, ventilating and shade place.

2. The products are non-dangerous goods.

3. Avoid skin and eyes contacting with the curing agent in processing.

4. Once exposed, immediately wash with certain detergent and water. If splash into eyes, should wash with flowing water at least 15 minutes and consult a doctor.