![]() |
|||||||||||||||||||||||||||
|
Raw materials
Silicone rubber for doll making |
|
Model |
E-615 |
|
Appearance |
Translucent |
|
Hardness(shore A) |
15±2 |
|
Mix ratio(A: B) |
1: 1 |
|
Viscocity (mPa.s) |
8000±2000 |
|
Tensile strength (MPa) |
4.7 |
|
Tear-strength (kN/m) |
14±2 |
|
Elongation(%) |
500 |
|
Density |
1.05 |
|
Pot life/working time (mins) |
20-40 |
|
Curing time/setting time |
3-5hrs(25°C) |
|
|
20-30mins(60°C) |
|
Shrinkage rate (%) |
≤0.1 |
Operation of silicone rubber for doll making
1.Mix component A and component B evenly according to the mixing proportion of 1-0.95-1.05,and can b e poured after desired the bubbles
2.The operating time(3-5)hours depends on the temperature, the curing time is 12-24 hours at the roo m temperature, and the curing time can be reduced to 10 minutes with the temperature increased to 80 -120 degree Celsius. the operating time of the room temperature quick drying type is less than 20 mi nutes and the curing time is 1hour.
3.The product can be produced in red .yellow ,etc .according to the customer's requirements.
Good deal: buying from seller
|
This page is about importers and exporters of Silicone rubber for doll making Search in a category : Raw materials Search in a category : rubber, silicone, making, doll |
Sunday, November 08, 2026
Quantity : 1107 - Price : 25,00 €
Exclusive Offer: Ceramic Shower Trays at Clearance Prices Take advantage of our exceptional sale of ceramic shower trays at clearance prices, perfect for construction professionals, resellers, and contractors. This is a great opportunity to expand your range of sanitary products at...
Thursday, January 18, 2024
Price : 13955.57-697778.50 U
Maintenance is forever, this is the challenge for all manufacturing plants anytime anywhere. Using EAMic® CMMS manufacturing maintenance software is the way to mitigate the risk of equipment failure or breakdown, increase uptime, and obtain lifecycle profit for all your single piece of asset...
Thursday, April 27, 2023
Brass is an object made of an alloy of copper and zinc. The melting point of brass with a copper content of 56%~68% is 934~967 degrees. Brass has excellent mechanical properties and abrasion resistance. So brass is a good material for manufacturing custom brass cnc machining parts...