Brass Check Valve

The composition of the brass one way check valve is an alloy composed of copper and zinc. If it is only composed of copper and zinc, it is called ordinary brass. Brass is often used to make valves, water , connecting for internal and external air conditioners, and radiators. The brass double check valve is very convenient to use. With this tool, the operation method is also simplified a lot. The process of starting and closing is very fast, and the volume is also very light, and the installation is also very simple. Therefore, the brass ball check valves are so popular among customers. If you want to learn more about the brass check valve price, please contact us! As one of the brass check valve suppliers and brass check valve manufacturers with both superior brass valve for water and after-sale service, we are looking forward to meeting your different needs.

Brass Check Valve Details:

The check valve is the valve flap that uses the flow of the medium itself to control the switch. It can avoid the backflow of the medium, so it can also be called a check valve. Under the effect of a single direction of the fluid pressure, the valve blades are opened, and when the fluid is running in the opposite direction, the fluid pressure and the self-coupling of the valve disc will affect the valve seat and cause the flow to be disconnected.

Brass Check Valve Specifications

Good Ways of Freeing A Stuck Brass check Valve

For freeing a stuck valve, the design should adopt the open-rod structure and coarse-tooth trapezoidal thread; in the installation, there should be a firm bracket at the valve to prevent the valve from being bent along with the displacement of the pipeline. The half inch brass check valve, 1 inch brass check valve and 3 inch brass check valves for water and the cold storage box can be fixed by elastic connection to prevent the valve stem from deforming and being out of concentricity with the valve body; during the bare cold period, check and adjust the valve installation in the cold state. When the valve is found to be stuck after cooling, the fixed flange of the valve on the shell can be adjusted to make it open and close freely. During operation, the heating before starting should be thorough, and the valve should not be leaked when closing the valve, and do not use excessive force.

As a bronze valve manufacturer, we will do our best to meet all the needs of customers.