Everything else / Bulk
Tungsten Rod |
iameter(mm) |
Black tungsten rod |
|
Polished tungsten rod |
|
Custom length tolerance(mm) |
Diameter tolerance (%) |
circular degree |
Diameter tolerance (%) |
circular degree |
||
0.8≤d≤3.0 |
±2 |
2 |
±0.03 |
0.03 |
L≤50±0.5 |
3.0 |
±2 |
2 |
±0.05 |
0.05 |
50 |
6.5 |
±2 |
2 |
±0.08 |
0.08 |
100 300 |
13.5 |
±2 |
2 |
±0.15 |
±0.15 |
500 |
25.0 |
±2 |
2 |
±0.25 |
±0.25 |
1000 |
Application of Tungsten Rod
Tungsten rods possess special properties, such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus. Therefore, tungsten rods are widely used in various fields. Such as support line, lead line, printer needle, various electrodes and quartz furnace, filament, high speed tools, automotive automatic products, sputter target material.
Production Process of Tungsten Rod
Different average forging ratios and forging methods were used to draw the sintered pure tungsten bar, and the annealed tungsten bar was annealed under different annealing systems. The microstructure and physical and mechanical properties of the samples were analyzed by metallographic microscope, hardness tester and density tester. The results showed that:
1.0 After forging, the density and hardness of tungsten bar are improved significantly, but too large average forging ratio will easily lead to forging cracking and other phenomena of tungsten bar. When forging at 1450℃, the average forging ratio should be less than 32%.
2.0 Compared with the tungsten bar forged with smaller average forging ratio and one end of one fire, the tungsten bar forged with larger average forging ratio and two ends of one fire has finer structure and higher hardness.
When the total forging ratio is about 80%, the recrystallization of the tungsten rod forged at one end of one fire is basically completed after annealing at 1300℃ for 30 min, while the recrystallization of the tungsten rod forged at both ends of one fire is completed after annealing at 1350℃ for 60 min when the average forging ratio is larger. After annealing, the hardness of tungsten bars with the two forging processes will decrease, and the hardness of tungsten bars with the former process is less than that with the latter process before annealing and at the early stage of annealing, and this difference is no longer obvious with the completion of recovery recrystallization.
Good deal: buying from seller
This page is about importers and exporters of Tungsten Rod Search in a category : Everything else / Bulk Search in a category : tungsten |
Sunday, April 03, 2016
Quantity : 1 - Price : USD3000
Ring Die Biomass Wood Pellet Machine China Professional Manufacturer Questions Service Ms Jennifer: Email pelletmill08@tonyjixie.com, Mob: +86 15854107188 Introduction of BIomass wood Pellet Machine It is a newly wood pellet mill machine, researched, designed and produced by ourselves...
Saturday, December 12, 2015
Quantity : 500 tons/m - Price : $1000/ton
- Ductile Iron Manhole Covers Sand Casting As Per Requirements - 1.Casting experience: 10years,OEM service available. 2.Process: Sand Casting, Investment Casting (Precision Casting/Lost-Wax Casting). 3.Production Capacity: Sand Casting 2000 tons per month,Investment Casting 120...
Thursday, July 30, 2015
Quantity : ISO9001:20 - Price : FOBqingdao USD50
Product Description - ductile iron manhole cover/casting manhole cover - We can produce all kind of manhole cover with customers' drawing or sampe. OEM ans ODM are welcomed. Characteristics of our manhole cover: 1. Material: cast gray iron, ductile iron. 2. Shape: round, square...