N,N-dimethylcyclohexylamine DMCHA CAS98-94-2 PC-8
Chemical name: N,N-dimethylcyclohexylamine
Abbreviation: DMCHA
English name: N, N-dimethylcyclohexylamine
CAS: 98-94-2
Chemical formula: C8H17N
Physical and chemical properties
N,N-dimethylcyclohexylamine is a colorless to pale yellow transparent liquid at room temperature, soluble in and ether solvents, and insoluble in water. It is a strong basic tertiary amine compound.
Boiling range: 160-165 ° C
Freezing point: -60 ° C
Viscosity (25 ° C): 2mPa.s
Density (25 ° C): 0.85-0.87g/cm3
Refractive index (20 ° C): 1.4541-1.4550
Flash point (closed cup): 40-41 ° C.
The minimum explosion limit (volume fraction) of steam in air is 3.6% and the maximum is 19.0%.
Shanghai Qiguang Industry & Trade Co., Ltd.
Technical Data Sheet
DC PC-8
Description
DC PC-8 is a tertiary amine
used primarily to promote the urethane (polyol-isocyanate) reaction in a wide range of rigid foam applications.
Applications
DC PC-8 is recommended for
evaluation in a broad range of rigid foams.
A major application is insulation foams, including spray, slabstock, board laminate and refrigeration formulations. DC PC-8 is also used in rigid foam furniture frame and decorative parts manufacturing.
It can be batched with the polyol or metered as a separate stream.
Shelf Life:
24 Months
Standard Packaging:
170KG Steel Drum
IBC Drum is recommended.
Items Spec
Content,Wt% 98 min
Moisture ,Wt% 0.5 max
Typical Properties
Flash Point, °C (PMCC) 43
Viscosity @25 °CmPa*s1 2
Specific Gravity@25°C(g/cm3) 0.87
Water Solubility Insoluble
Appearance Colorless liquid
Storage Information
Qiguang Group recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products' performance in the end use. The optimum storage temperature is between 10 °C and 30° C. Lower and higher storage temperatures are not preferable and should be avoided.
System of law
There are various synthetic routes for N,N-dimethylcyclohexylamine, and depending on the type of the raw material, there are a cyclohexanone method, an N,N-dimethylcyclohexylamine method, a cyclohexylamine method, and a phenol method.
特殊用途 N,N-二甲基环己胺的主要用途
是作为硬质聚氨酯泡沫的催化剂。它是一种低粘度、中等活性胺催化剂,用于冰箱、片材、喷雾剂和原位填充聚氨酯硬质泡沫。该催化剂同时催化凝胶化和发泡 ,为硬质泡沫的发泡反应和凝胶反应提供了相对平衡的催化性能,对水和异氰酸酯的反应(发泡反应)具有更强的催化剂,多元醇羽流异氰酸酯的反应也具有中 等催化作用,是发泡反应的强初始催化剂。除用于硬质泡沫外,还可用于软质泡沫、半硬质泡沫等辅助发泡剂的成型。成分性能稳定,可调节性强,可长期储存 。
https://www.siliconeoil.com.cn/nn-dimethylcyclohexylamine-dmcha-cas98-94-2-pc-8/
Location : No.581,Yanchang Middle Road,Jin'an District,Shanghai, 20007 shanghai,
Contact : Edison Edison zhao, +86 2 16 77 73 78