Everything else / Bulk
Pre-painted Galvalume Steel (PPGL)
|
Prepainted Galvanized Steel Coil |
|||
Standard |
AISI, ASTM, BS, DIN, GB, JIS |
Grade |
Q235B-0355B |
Type |
Cold rolled |
Surface |
Galvalume |
Color |
RAL Code/ Customerized printech |
Zinc coating |
15-275g/m2 |
Thickness |
0.15mm-1.2mm |
Width |
600m-1250mm |
Coil Weight |
3-5 Tons or Required |
Coil ID |
508mm/610mm |
Painted Surface |
Printed/Matte/Wrinkled |
Coating |
PE/PVDF/HDP/SMP |
Top Painting |
10-35 Microns |
Back Painting |
5-35 Microns |
MOQ |
25 Tons(1 20ft FCL) |
Place of Origin |
China |
Payment Term |
T/T(30% Deposit+70%) |
Package |
Standard Sea-worthy Packing |
Application of PPGL sheet
According to different thickness specifications and good corrosion resistance, the PPGL is more suitable for severe outdoor environments, which can be used in the power distribution cabinet (thickness of 1.2-2mm), solar water heater (0.32mm), anti-theft door panel, etc.
Differences between PPGI and PPGL
PPGI is short for pre painted coil steel, while PPGL is short for pre-painted galvalume steel. Compared with PPGL, PPGI has relatively active chemical properties, so its anti-corrosion ability is quite different. The test under the same outdoor conditions shows that the service life of PPGL is more than four times that of PPGI. The aluminium-zinc alloy structure of PPGL is composed of 55% aluminium, 43.4% zinc and 1.6% silicon solidified at 600 ℃. The whole structure is composed of aluminium iron silicon zinc to form a dense quaternary crystal, so as to form a strong barrier to effectively prevent the of corrosion factors.
1. Corrosion resistance:
Aluminized zinc has a stronger protective effect and better corrosion resistance than galvanized products. The corrosion resistance of the "55% aluminium-zinc plated steel coil" comes from the barrier protection function of aluminium and the sacrificial protection function of zinc. When zinc makes sacrificial protection in the cutting, scratch and coating scratch parts, aluminium forms an insoluble oxide layer to play the function of barrier protection.
2. Heat resistance:
The heat resistance of 55% Al Zn alloy steel plate is better than that of galvanized steel plate, which is similar to that of PPGI. PPGL steel plate can be used in high-temperature environments up to 315 ℃.
3. Reflectivity:
55% Al Zn alloy plated steel plate has high reflectivity, making it a heat resistant barrier; The thermal reflectivity of PPGL is almost twice that of PPGI. Therefore, it can also achieve an energy-saving effect by acting as a roof and panel without painting.
4. Paintability:
Due to the excellent adhesion between the zinc layer of PPGL and the paint, when used as a signboard for general purposes, it can be painted without pretreatment and weathering treatment; PPGI needs weathering treatment and pretreatment. So that the surface of the PPGL sheet is smoother than that of the PPGI sheet.
East Steel, as one of the most excellent pre painted steel coil suppliers, offers a wide range of prepainted galvanized steel for you to choose from.
Good deal: buying from seller
This page is about importers and exporters of Pre-painted Galvalume Steel (PPGL) Search in a category : Everything else / Bulk Search in a category : steel, painted, galvalume, ppgl |
Wednesday, April 22, 2015
Quantity : 1piece - Price : USD5~36
1 Ashiloy Industry co,ltd solar panel: 3W 2 Lithium Battery: 3.7V / 4400mA high quality full capacity battery. 3.LED: power 3W, 38pcs. Epistar SMD 2835LED , color temperature 5500-6000K, lumens about 300LM. Brightness equivalent to 12 watts of brightness tricolor energy-saving...
Friday, June 21, 2013
Quantity : 2000T/mont - Price : 880usd
99.5% high purity white fused alumina/WFA 3-5mm Description: White fused alumina oxide powder is a high-quality raw material, made of fused refin ing crystal, high purity, self-sharpening, good acid and alkali resistance, high temperature, thermal properties and stability it...
Friday, May 16, 2014
Quantity : 500000pcs - Price : $1-25/pc
Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...