Audio and Video
PCD & PCBN
|
Product |
Diamond Content (Vol%) |
Product Properties |
Application |
ET02 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc. |
ET05 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc. |
ET10 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Fine machining, very good surface processing quality, for aluminum alloy (Si content<12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc. |
ET25 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
ET35 |
≥95 |
Good electrical discharge machining, very long life, good heat resistance and impact resistance. |
Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials. |
ET302 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
Available specification
|
|
|||||||
Grain size |
Application |
Grade |
Diameter |
Total thickness |
DIamond table thickness |
Woodworking |
Metalworking |
Conductive |
0.85μm |
Ultra-fine micron structure for excellent surface finish requirements, |
ET085 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
|||
2μm |
For good surface finishing |
ET02 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
|
|
√ |
|||
5μm |
ET05 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
10μm |
General purpose, balance cutting efficiency and life |
ET10 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
25μm |
Good wear resistance production,for high Si% Al alloy. |
ET25 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
302μm |
ET302 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
35μm |
ET35 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
PCBN (Polycrystalline Cubic Boron Nitride)
PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.
Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...
E-Grind provides two series of PCBN:
1) Solid CBN
2) CBN with Tungsten Carbide supporting.
PCBN and SBN Grade
Grade |
CBN grit (μm) |
CBN content (Vol%) |
Processing way |
Application |
SBN95Z1 PCBN95Z1 |
20、30 |
0.95 |
Continuous cutting with large stock removal |
For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy. |
SBN90Z PCBN90Z |
10、15 |
0.9 |
Continuous cutting with large stock removal |
For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc. |
SBN90Z2 PCBN90Z2 |
10、15 |
0.9 |
Continuous cutting with large stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
SBN80G |
3、5 |
0.8 |
Continuous cutting with Medium stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
SBN70G PCBN70G |
3、5 |
0.7 |
Continuous cutting with small stock removal |
For finishing the chilled steel and high temperature alloy with HRC45-55. |
SBN60G |
1、3 |
0.6 |
Continuous cutting with small stock removal |
For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS. |
SBN55G1 PCBN55G1 |
1、3 |
0.55 |
Slight non-continuous and continuous cutting with small stock removal |
For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS. |
PCBN Blanks
Available specifications
SPEC |
D(Diameter) (mm) |
T(Thickness)(mm) |
t (CBN section thickness)(mm) |
PCBN55G1 |
PCBN70G |
PCBN90Z |
PCBN90Z2 |
PCBN95Z1 |
Ф45×1.2×0.6 |
45 |
1.2±0.05 |
0.5-0.8 |
√ |
√ |
√ |
√ |
√ |
Ф45×1.6×1.0 |
45 |
1.6±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×3.2×1.0 |
45 |
3.2±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×3.8×1.0 |
45 |
3.8±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×4.5×1.0 |
45 |
4.5±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
As a superabrasive ltd, we can offer kinds of diamond dies for sale, anything you need, please leave us a message.
Good deal: buying from seller
This page is about importers and exporters of PCD & PCBN Search in a category : Audio and Video Search in a category : pcbn |
Saturday, May 05, 2007
Quantity : 1kg - Price : 3$
We export dried herring with high quality to Russian, Ukraina, Korean, Malaysian, Hong Kong Markets... Our company is one of VASEP (VietNam Association of Seafood Exporters and Producers) members. If you interested in my products please contact us, we're willing to send you our samples...
Thursday, May 16, 2024
Quantity : 500 pcs - Price : 5 euro
*experiences of manufacture & supplier of top quality PVC handbags. *top quality PVC handbag *lowest Price, good service, high quality *mini order request and drop ship available *shipping worldwideLocation : F. Robbelaan 27, Den Haag, Contact : Stanley Heerenveen, +31 6 48 33 49...
Friday, September 19, 2008
Quantity : 1 Containe - Price : A definir
Recherchons pour export pneus usagés divers voitures/ Secondes mains , pour une tournante de un (1) container 40' pieds high cube par mois.Location : Lippmannstrasse,13, 22769 22769 Hambourg, Contact : Lakhdar stefan Kaddour, +4917657064787