![]() |
|||||||||||||||
|
Medical
SDS-05035 0.50mm Diameter 35mm Length Glued Steel Fiber
|
|
Name |
SD-05035 |
|
Type |
Glued |
|
Diameter |
0.50mm |
|
Length |
35mm |
|
L/D(length/diameter) |
70 |
|
Tensile strength |
>1150Mpa |
|
Application |
shotcrete |
The Advantages of SDS-05035 0.50mm Diameter 35mm Length Glued Hooked End Steel Fiber
It is made of high-speed wire, which could make sure it has high tensile strength;
It has good dispersion, which can make sure quick and convenient mixing and evenly spread in concrete.
Reduce steel reinforcement requirements;
Reduce crack widths and control the crack widths;
The glued steel fiber is widely used in bridge, high way, tunnel, industrial floors and etc.
Steel high strength fiber USER'S GUIDANCE
Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-05035 0.50mm Diameter 35mm Glued Length Hooked End Steel Fiber
Star Smith is a professional steel fiber manufacturer that can offer a wide range of hooked end steel fiber that meets different needs.
Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet,24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
Now the steel fibre price is very reasonable.
Good deal: buying from seller
|
This page is about importers and exporters of SDS-05035 0.50mm Diameter 35mm Length Glued Steel Fiber Search in a category : Medical Search in a category : 50mm, diameter, fiber, steel, 35mm, glued, length |
Tuesday, August 11, 2015
Price : 1$ ~30 $
One Lus International is a professional bike & motorbike lock manufacturer in Taiwan and provides a series of security padlock to meet customer's needs. The utility padlock is made of bolt cropper and hacksaw-resistant locks with an integral 7-pin locking mechanism. With a long...
Sunday, December 02, 2012
Quantity : 1 - Price : 95 000,00 €
Sell truck sound drill Ingersoll Rand T4W year 1978 with 215 m of steel tubes 2 hammers sd6 and sd8 + taillants 3 and all the necessary equipment. Truck and Probe / compressor completely put back(completely handed) for nine, pumps and hydraulic system as well as pumps in foam(moss) included...
Tuesday, December 23, 2025
Quantity : 100,000 pc
JBI is one of the leading professional screw suppliers in Taiwan and specialized in manufacturing screws, bolts, nuts, washers, fittings, springs, and other hardware. All our products are produced according to the IFI, DIN, ISO International standard specification. Our fasteners...