IP Based Amplifiers

IP Based Amplifiers

※ Rated power 60W/120W/240W/350W/500W available.

※ Rack installing design with 2U alloy panel.

※ Embedded computer technology

※ 70V/100V voltage and 4-16 Ohm output .

※ 3 MIC. inputs and 2 LINE inputs.

※ BASS and TREBLE tone controller.

※ Individual volume controller inputs.

※ 1 AUX output for additional amplifier.

※ MIC1 overrides other inputs

※ 5 LED indicators for working status.

※ Supports protocols of TCP/IP,UDP,IGMP.

※ Hifi audio balance ensure that the reduction and DSP audio processing technology.

※ MIC1 overrides other inputs with 0~30dB dB attenuation.

Description

The RH-AUDIO IP Based Amplifiers offer an ideal solution for some venues that need to dolarge-scalepaging and multizoned background music across multiple facilities and locations with complex distribution and scheduling needs.

It's easier than ever to install a very wide paging or intercom system using your existing Ethernet network.

The ip amplifier can be placed wherever you have a network drop without need for long speaker wire connections from a large central amplifier.

With the ip paging amplifier you will enjoy a quicker and more flexible installation than traditional wired analog systems.

Specifications of IP Based Amplifiers

Note:

• 4-16 Ω output drives the speakers based on impedances.

• 70V/100V outputs drive the speakers with built-in step-down transformer.

• Do not use both the 4-16 Ω,70V and 100V terminals at the same time.

• Impedances indicated in the figures represent the total speaker system (load) impedances.

Guangzhou Xinghongde Electronics Technology Co.,Ltd (Brand: RH-AUDIO) manufactures and supplies reputable high-end devices of commercial pa speakers,offering pre-sales service on the solutions according to customers' specific requirements and after-sales service on installations.