PC Injection Molding

PC is classified as a ''thermoplastic'', and the name has to do with the way the plastic responds to heat. Thermoplastic materials become liquid at their melting point (155 degrees Celsius in the case of Polycarbonat). A major useful attribute about thermoplastics is that they can be heated to their melting point, cooled, and reheated again without significant degradation. Instead of burning, thermoplastics is like Polycarbonate liquefy, which allows them to be easily injection molded and then subsequently recycled.

PC is commonly used for plastic lenses in eyewear, in medical devices, automotive components, protective gear, greenhouses, Digital Disks (CDs, DVDs, and Blu-ray), and exterior lighting fixtures.

Injection molding most often produces parts by polycarbonates and their blends. Since polycarbonate is highly viscous, it is usually processed at high temperature to reduce its viscosity. In this process, the hot polymer melt is pressed through into a mold with high pressure. The mold when cools, gives the molten polymer its desired shape and characteristics. This process is generally used to manufacture polycarbonate bottles, plates etc. Since polycarbonate is a poor-flowing plastic, wall thickness should not be too thin.

Properties of PC Injection Molding

Mechanical performance: high strength, fatigue resistance, dimensional stability, and small creep (also rarely changes under high temperature conditions);

Heat aging resistance: The enhanced UL temperature index reaches 120 ~ 140 ℃ (long-term outdoor aging is also very good);

Solvent resistance: no stress cracking;

Stability to water: easy to decompose under water at high temperature (use caution in high temperature and high humidity environment);

Insulation performance: excellent (moisture and high temperature can also maintain stable electrical performance, is an ideal material for manufacturing electronic and electrical parts);

Dielectric coefficient: 3.0-3.2;

Arc resistance: 120s;

Form ability: injection molding or extrusion of ordinary equipment.

We provide custom plastic injection molding china ,polycarbonate injection,pc abs injection molding,molding polycarbonate ,polycarbonate injection molding and injection molded parts,you can consult us injection molding cost and can polycarbonate be injection molded,contact us now.