Raw materials
5mm PVDF one side Gold Brush aluminium composite panel |
Panel Thickness(mm) |
2mm-8mm |
Aluminium Skin Thickness(mm) |
0.08mm-0.5mm |
Width(mm) |
1220mm-2000mm |
Length(mm) |
2440mm-8000mm |
Applications:
Constructional exterior curtain walls;
Decorative renovation for storey-added old buildings;
Indoors decoration for interior walls, ceilings, bathrooms, kitchens and balconies;
Advertisement board, display platforms and signboards;
Wallboard and ceilings for tunnels;
Raw materials in industrial purpose;
Materials used for vehicle and boat.
Aluminum Composite Panel (ACP) is made up of three layers, with two layers of aluminum skin on the top and bottom, and one layer of anti-toxic polyethylene material in the middle. Also, both of skin surfaces need to be coil-coated with special paint material like PVDF or PE resin under a specific temperature condition.
Strictly according to the international quality system ISO9001 and ISO14001 produce superior quality aluminum composite panels. Our aluminum composite panels passed GB/T1778-1999 ,SGS tests and gained CE certificate. Because of its excellent weather proof and other features, the panel becomes a very popular Cladding materials in the world.
Surface properties:
Paint Thickness(micron) |
Anodize |
Pencil Hardness |
2H |
Toughness Of Coating |
2T |
Temperature Resistance |
-500C+900C |
Impact Strength(kg/cm2) |
50 |
Boiling Water Resistance |
boiling for 2 hours,No change |
Acid Resistance |
Immerse surface in 2% HC1 for 24hours,No change |
Alkali Resistance |
Immerse surface in 2% NAOH for 24hours,No change |
Oil Resistance |
Immerse surface in 20# engine oil for 24hours,No change |
Solvent Resistance |
Cleaned 100 times with Dimethylbenzene,No change |
Cleaning Resistance |
>1000 times no change |
Thermal Expansion |
2.4mm/m @1000C Temp difference |
Peel Strength |
Average 131N.mm/mm |
Bending Strength |
>100MPA |
Bending Elastic Modules |
>2.0*104MPA |
Heat Distortion Temperature |
>950C |
Certificate: |
Our ISO 9001: 2008certified company houses 67 QC staff with 15 years experience that are allocated to at least two QC staff per production line. To maintain a strict QC system, we not only utilize precision testing instruments but we also continuously train our QA personnel regarding the latest testing principles. |
Customer Show: |
We had taken part exhibition hold in Sao Paulo, exhibition hold in Mexico, exhibition hold in Sao Paulo, Brazil, etc |
Good deal: buying from seller
This page is about importers and exporters of 5mm PVDF one side Gold Brush aluminium composite panel Search in a category : Raw materials Search in a category : side, brush, composite, pvdf, panel, gold, aluminium |
Friday, May 16, 2014
Quantity : 5000sets - Price : $1000-5000/set
Injection Molding Description Description: 1.Mould Base: HASCO, DME, RABUDIN, DIN, JIS, LKM. 2.Mould Core: 718,S136,P20,NAK,LKM,EK4,X13T6W etc. 3.Hot runner: Mold-masters,Master Tip,Husky,Hasco,DME,Yudo,Incoe,Thermopla y etc. 4.Standard Parts: DME,HASCO,NEAREST ANSI STANDARD...
Thursday, May 30, 2024
▲VE-30RFM RX (Front / Rear) ▲VE-30RFM TX (Front / Rear) VE-30RFM HDMI to RF Matrix Extender is designed to convert HDMI signal to HD digital TV signal based on DVB-T CATV signal, it uses 64QAM mode to realize the HD digital TV signal conversion and transmit via coaxial cables for...
Friday, March 06, 2015
SPECIFICATION size : A4,A3,Letter-Size brightness : 100% whiteness : CIE 167 Thickness : 110 um Opacity : 95% Roughness : 140 ml/min Sheets/Ream : 500 sheets Reams/Box : 5,10 Features and Benefits : 1. Excellent image clarity & contrast. 2. High opacity and thickness...