Raw materials
Hot sale mold making liquid silicone rubber for gypsum decoration |
Item No. |
Hardness (shore A°) |
Viscosity (CPS) |
Tensile-strength ( kgf /cm2 ) |
Tear-strength (kgf /cm2 ) |
Elongation-break(%) |
Mixing ratio |
Operation time (25 ℃ ) |
Curing time(25 ℃ ) |
Shrinkage |
C-825 |
25±1 |
22000±1000 |
≥42 |
≥26 |
≥420 |
100: 3 |
20-30 mins |
2-3h |
≤0.3% |
5. Using instructions of mold making liquid silicone rubber for gypsum decoration
Step 1: Prepare and clean the prototype.
You must make sure your original molds perfect, fix the original mold on a board, then using some assistant material (like cardboard) to make a frame for to surround the prototype. The frame is no need, if we make the mold by brushing way.
Step 2: Take the silicone and catalyst as the ratio 100: 2 (silicone : catalyst= 100: 2), mix the silicone rubber and catalyst evenly.
Notes: rtv silicone rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicone rubber will be partly solidified and this will bring troubles for your final operation. What's more, the finishes molds will have a short life. All of these will cause a waste of silicone rubber.
Step 3: Vacuum pumping.
After mixed the silicone evenly, it is better to release the bubble by vacuum pumping.
Step 4: Pouring cast or brushing cast.
After released the bubble, we can pour/brush the silicone rubber on the prototype.
Notes: Please finishes all the steps within the operation time. If not, it will cause cross linking reaction, and no more further steps will be available. So, we have to pay attention to the pot life and curing time.
Attentions:
1. The curing speed of this product is closely related to the ambient temperature,high temperature fast curing, on the contrary, low temperature curing slow. Users can appropriately adjust the amount of curing agent to obtain the desired cure speed according to the ambient temperature level.
2. If the copying original models are ceramic, 815 resin, ABS material, wood, metal and other materials, the original models surface need use a release agent or baking mold method then reperfusion mold for avoiding sticky mold phenomenon.
3. Two parts of this series of products should be stored separately sealed, placed in a cool place, avoid the sun and rain.
4. If viscosity is increased or it has precipitation in silicone at storage period, can be used after mixing evenly, its performance unchanged.
5. This product is non-dangerous goods, if skin contacts the curing agent, can be cleaned with the suitable detergent and water; if splashed into the eyes, immediately wash with clean water at least 15 minutes, and consult a doctor.
Packaging & Shipping
6. Package and shelf life of mold making liquid silicone rubber for gypsum decoration
Package
1kg/drum,5kgs/drum,20kgs/drum,25kgs/drum,200kgs/drum.< /span>
Shelf life and transportation
1. Twelve(12) months when stored at 25C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
8. After-sales Service & Technical Support
Guochuang Silicone provides professional after-sales service and technical support which is our another competitive force to win the market and they are as follows:
1. After-sales service tenet: Fast, Determinate, Considerate, Complete
2. Service quality target: Win the customers' satisfaction
3. Service efficiency: We will make a reponse within 24 hours no matter our products are during the shelf life or not. The satisfaction answer must be provided within 72 hours.
Good deal: buying from seller
This page is about importers and exporters of Hot sale mold making liquid silicone rubber for gypsum decoration Search in a category : Raw materials Search in a category : liquid, rubber, sale, making, gypsum, silicone, mold |
Friday, April 19, 2024
Hello we are a craft fossil marble (stone erfoud SARL), which focuses on the effects of the geological region of southern Morocco erfoud. Our activities are varied: the manufacture of all types of fossilized marble, particularly brown and black, creating decorations and design, production...
Monday, July 23, 2012
Quantity : 100000 - Price : 3,75 €
We have zara stock clothes (zara only) for certain countries. The prices are 3.75 grades A Eur B grades are 1.95 Eur Everything is in EXW. Shoes all at 6.80 Eur There are 60% of Women 20% of men 20% of child Attached are the% of accessories that are on lots of ZARA. Female 11...
Thursday, March 14, 2013
Quantity : 2 - Price : 400,00 €
Aniltum Brand NEW Men's Coat Gentleman of high quality s overcoats lapel warm R225975 Made In China Model Number R225975 Brand Name Anilutum Gender Men's Material Polyester Season Winter Type Coat Brand: Anilutum Style: Fashion Type: Men's Coat Online: 9AM-5PM Aoniludan...