ZN7K300——HIGH - 60160 ads

Thursday, October 19, 2017

Quantity : 200000000 - Price : 0,10 €

We are a company specializing in producing T/T, T/C, C/C fabric in China. Our main products are as follows, T/C 65/35 80/20 90/10 45*45 133*72 63” 110*76 47” 63” 96*72 47” 63” 88*64 47” 63”,and T/C 80/20 21*21 108*58 63”, 20*16 120*60 63”, T/C 50/50 110*76 63”,96*72 63”. Our products...

Wednesday, October 18, 2017

Specification. Pressure Rating: 1.6-16.0Mpa Specification: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS, JB79 Structural characteristics: 1.Automatic blowoff mechanism is installed inside the valve. It is a new-type crown valve plate with reliable sealing,and steam...

Wednesday, October 18, 2017

Specifications. Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50, Flanged: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP Performance / Advantages: Adopt imported material as its hot sensitive element, and so it is high sensitivity...

Wednesday, October 18, 2017

Brief Introduction. Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure. Working Principle The design makes use of the working principle of difference in density of steam and condensate. The compound...

Wednesday, October 18, 2017

Brief Introduction. TD42 Steam Trap is a kind of thermodynamic steam trap which is mainly used for the environment with low condensate back pressure and low capacity requirement, similar to Spirax Sarco Design. Structural Characteristic. 1.Assembled with steam or air heat preservation...

Wednesday, October 18, 2017

We are renowned manufacturers of well designed and highly efficient Double Port Safety Valves. Demanded by modern plants, our safety valves are capable of dealing with the pressure and temperature normally encountered in the steam process and compressed air. Our range of Double Port...

Wednesday, October 18, 2017

Pressure Protection Device for the equipment and pipeline of the steam, ect. The working temperature with Carbon Material Type are less than 425℃ and with WC6 Material type are less than 500℃ and WC9 Material Type are less than 550℃. Location : Heyi Industrial Zone,Oubei Town, 325105 Oubei ...

Wednesday, October 18, 2017

Introduction: 1.In low lift valves, the disc only lifts a distance of 1/24th of the bore diameter. The discharge area is determined entirely by the position of the disc, and since the disc only lifts a small amount, the capacities tend to be much lower than those of full or high lift valves...

Wednesday, October 18, 2017

Features: Pilot operated safety valve, newly-structured, is mainly applied to such industries as petroleum&natural gas, chemistry, electric, metalurgy&burning gas. It is the best super-pressure protecting equipment on press equipment, container, or pipeline. It is mainly...

Wednesday, October 18, 2017

Advantages 1, To achieve greater CV value and wider adjustable ratio S shaped structure body is generated from the fluid analysis in a unique, can be suppressed by flow path shape complex and eddy current as well as flow path suddenly expand caused by complex and irregular flow phenomenon...

Wednesday, October 18, 2017

This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential is big, and operation is steady. Compared with the ordinary...

Wednesday, October 18, 2017

Introduction of low lift safety valve 1.In low lift safety valves, the disc only lifts a distance of 1/24th of the bore diameter. The discharge area is determined entirely by the position of the disc, and since the disc only lifts a small amount, the capacities tend to be much lower...

Wednesday, October 18, 2017

Brief Introduction. This series reducing valve is direct action membrane type spring reducing valve, mainly composed of membrane, adjusting spring, valve seat and valve flap. It sense the change of lower stream pressure through the membrane and drive the valve flap, change and control...

Wednesday, October 18, 2017

Brief Introduction. This series reducing valve is direct action membrane type spring reducing valve, it is manufactured and designed on the basis of advantages of foreign same products. It is mainly composed of membrane, valve flap, and adjusting spring. It sense the change of lower...

Wednesday, October 18, 2017

Brief Introduction. YB43X is Proportion type pressure reducing valve,as its floating piston ends have different cross-sectional area,there will be a fixed pressure differential between the valve inlet and outlet,thereby change the outlet pressure conditions,achieve the purpose of decompression...

Wednesday, October 18, 2017

Brief Introduction. RP-6 high-sensitivity steam pressure reducing valve is pilot piston type pressure reducing valve mainly used for steam.The product made following improvement on the basis of normal pressure reducing valve, enlarge the piston area, change the throttle structure...

Wednesday, October 18, 2017

Brief Introduction. Y14H/F Direct Acting Bellows Pressure Reducing Valve is newly improved product based on MIYAWAKI. This Direct Acting Bellows Pressure Reducing Valve material is Stainless steel, which can be used for some corrosive medium, it can also be used for Air, Steam, etc...

Wednesday, October 18, 2017

1. HLC Small Size Single Seat Pneumatic Pressure Control Valve / Sleeve Type Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the...

Wednesday, October 18, 2017

Brief Introduction ZDLM Electric Actuated Sleeve Type Pressure Balanced Control Valve adopt Pressure Balanced Sleeve-guided structure. It has following advantages: Precise valve body , S-Pattern Flow Port, Small Pressure Drop, Big Adjusting Range and High Precisi on of Flow Cv Value...

Wednesday, October 18, 2017

Brief Introduction ZDLP Electric Actuated Single Seat Globe Control Valve adopt top-guided structure. It has following advantages: Precise valve body , S-Pattern Flow Port, Small Pressure Drop, Big Adjusting Range and High Precisi on of Flow Cv Value. The Dis-guiding area is big....

Wednesday, October 18, 2017

CQ5240E Double column Vertical Lathe for sale 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Wednesday, October 18, 2017

Price : Negotiable

C5235E Double-column Vertical Lathes 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Wednesday, October 18, 2017

C5231E Double-column Vertical Lathes china 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Wednesday, October 18, 2017

C5228E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Wednesday, October 18, 2017

Quantity : 9999999999

C5225E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Wednesday, October 18, 2017

Quantity : 5000pcs - Price : US $0.1

At present, there are thousands of sets of molds, high precision, high temperature, leading quality counterparts, the industry has a good reputation.From small to large packaging specifications can also be based on the special requirements of customers. Material: PVC PS PP ABS TPR PETG Colors...

Wednesday, October 18, 2017

Quantity : 5000pcs - Price : US $0.1

Material: PVC PS PP ABS TPR PETG Colors: Clear or blue or as custom Shape: Oval or square or as custom Length: 50mm-3000mm Thickness: 0.3mm-2mm Certification: ISO9001: 2008/ROHS/SGS Design: Customized designs, colors, logos and sizes are welcome Packing Details: Carton and plastic...

Wednesday, October 18, 2017

Quantity : 5000pcs - Price : US $0.1

At present, there are thousands of sets of molds, high precision, high temperature, leading quality counterparts, the industry has a good reputation.From small to large packaging specifications can also be based on the special requirements of customers. Material: PVC PS PP ABS TPR PETG Colors...

Wednesday, October 18, 2017

Price : US $0.15

Material: PVC PS PP ABS TPR PETG Colors: Clear or blue or as custom Shape: Oval or square or as custom Length: 50mm-3000mm Thickness: 0.3mm-2mm Certification: ISO9001: 2008/ROHS/SGS Design: Customized designs, colors, logos and sizes are welcome Packing Details: Carton and plastic...

Wednesday, October 18, 2017

Price : US $0.1

Material: PVC PS PP ABS TPR PETG Colors: Clear or blue or as custom Shape: Oval or square or as custom Length: 50mm-3000mm Thickness: 0.3mm-2mm Certification: ISO9001: 2008/ROHS/SGS Design: Customized designs, colors, logos and sizes are welcome Packing Details: Carton and plastic...